Відео

If the client wants, I apply Nyalic or ProtectaClear after the laser clean.

Yeah true depends on what you class as affordable. Chinese ones are around USD$30,0000.

I am in NZ and charge $250/hr.

Thanks mate. Only $300k NZD to go…for the entire business set up cost. So it will be a while.

Did purchase multiple units or just one? Have you ran into any mechanical issues with the laser?

@@acampbell3720 just the one. I had an issue with a cable twist shortly after I got it but nothing since

Hi, I'm just starting a new laser cleaning business and purchased a 200w pulse machine. Would you have any issues sharing some settings as there were no settings with my machine. Would there be any issues cleaning stainless steel steriliser chambers without damaging the surface, I think it could be a good business, what do you think.

For stainless you need to keep the focus out around 200mm. Frequency around 30kHZ and 💯 power

I am a mobile service www.ecolasersolutions.nz/

No it’s really safe. I really want one

I use a 300W Narran machine

Not sure of the MJ sorry. I use a fume extractor or a Pullman vacuum depending on whats being cleaned.

Hola, esta máquina está fabricada por Naran en la República Checa.

Los conozco ... hay una copia china de Narran ... pero no tienen buenos comentarios respecto a sus equipos ...

hay copias chinas de todo lo que tiene malas criticas amigo

Hi it depends where you are based. This machine is built in Europe. I live in New Zealand so pay premium due to importing through a supplier in Australia. I can tell you they aren’t cheap and this cost me in the $100’s K.

I don't sell them sorry I am a mobile service in NZ

Pero cuanto pagaste tú por la maquina?

By the nano-second.

By the hour normally around $250

Yeah you little son of a.

Does it have the sound of people enjoying a cool beverage and hot meal in the background like mine. And people looking at you wondering why you are making this noise into your phone?

300W

Yes correct 300W

They aren’t dumb mate. The surface heat depends on the settings on the machine. Yes it can get hot. But this can be avoided with different parameters. Class 4 lasers are not safe for contact with the skin or eyes. Eye protection should be worn by the operator and any observers.

@@ecolasersolutions8769 thank you. Do you mean by class 4 the watts? And the paterns are the shape the way the lazer cleans right? Since i see that the frequency can be changet by most machines what does it count how many watts there are? Is the frequency setting how deep the lazer cleans? And the bigger the watts the less time it takes to go threw a layer? Sorry for my English.

The class is determined by the power. 300W Making it a class 4. Skin burns and eye damage is possible. Frequency is the time between the pluses. The mode set is the duration of the pulse. These setting can affect the heat and amount of layers removed in a pass. The more powerful the machine in Watts the more capable it is of removing thicker contamination and moving faster through the cleaning applications.

@@ecolasersolutions8769 thank You!

Yes correct I use a Narran 300W nano second pulsed laser 1064nm.

@ecolasersolutions8769 Thank you. I'm curious, do you think that of you moved up to say a 1000 watt laser by Narran that it would be more efficient in removing the mineral deposits and capable if removing heavier build-up over greater surface areas? Say 1/8 inch thickness?

Yes it would be faster for sure. 1/8 inch is around 3mm. That’s quite thick but it depends on what the contamination is. What’s it’s being removed from and how long it’s been there.

@ecolasersolutions8769 Thank you. I understand. Basically the same material you are cleaning off of the stainless steel. Hard water deposits made of line and calcium carbonate. Say 1/16" to 1/8" thick. It looked like the area below the spigot had heavier build up but that section was ommited from your video. I'd like to use it to clean ceramic and glass tile and the grout lines. What do you think? Maybe a 2000w laser?

You can’t generate too much heat with tiles and grout as they crack so can’t have too much power. Plus the cost of these machines are a major consideration. Narran have a dealer in the US. They can give you pricing. Sit down though.

Go back to watching them Jatwangkaismyname.

Laser cleaning with one hand holding a camera through continuously running water not ideal. It didn’t get missed but cheers for checking it out.

Where are you located mate?

@@ecolasersolutions8769 Pennsylvania USA

Ok cool. Hit these guys up. They build the machine I have. laserforcleaning.com/

@@ecolasersolutions8769 thanks

I've been wondering the same thing.

Thanks very much.

Hourly rate

That machine is a 300W

@@ecolasersolutions8769 Thanks.

Is this 300w machine a gaussian beam style or Tophat. I'm looking to start a laser cleaning business. What beam profile would you recommend?

@ecolasersolutions8769 Have you found that oil stains come out completely most of the time? My CW laser cleaner doesn't achieve the same level of clean on concrete as this video shows.