Відео

@@Blinkybills sadly I don’t believe so.

@@BenowaSi I was one of the original pre-orders, which I think I placed at the end of April, early May. Hopefully it won’t be too much longer for you, but it’s well worth the wait !!

@@Its_range_day thank you! cheers

@@zooze2001 it’s a full size magazine, but restricted to 10 rounds. I got it from my local store, being Gun Emporium, but your local store should be able to order them in. There’s also a mid version, which I’m thinking about getting, still only 10 rounds, but between this one, and the PMAG’s that come in the box, in size.

@@MichalWeselakRacing SK Long Range Match.

@paulguinane3076 I'll be testing some more ammo options in the coming weeks, so I look forward to your comments on how it compares with your Warwick.

@@Its_range_day my Warwick is great, I’ve got the 14” barrel with a 1-8 twist, so it does well with the heavier pills. It’s a heavy rifle though.

@@lukegregory8620 100m.

Yes he does @dougalmcalpine6804, and I tried to correct that in "Take 2" with new spotters, but it didn't really work.

@aceprecision1681 Glad it was helpful!

@@Outbackarms thank you. I want to do a few more ammo tests, so will post those over the next couple of weeks.

@@Its_range_day cheers keen to see them

Very nice! But I agree, it is pricey !

@@aceprecision1681 thank you, appreciate it. Lots more to come.

I love it ! I haven’t shot either the Warwick or the Oceania (hoping to at some point if I can), but I like it a lot more than the Taipan, which I have shot.

You and me both! @ivantheron4154.

Yep, it's a looker !!

Thanks @davea8060. Hoping to have another go this weekend.

@@381038jam he wasn’t the best, but I also could have told him what calls I wanted. I won’t be using him when I try again, and see if that makes a difference.

@@phootnote For the optic ? No, the scope is sitting on an Area 419 50MOA rail, then I’m dialling up 8 MOA from my 50m zero.

@@Its_range_day for the bolt or barrel

@@phootnote No, just running the standard setup.

@@Dayattherange Thank you. Hoping to have another go at it before the competition closes.

@@whysocurious7649 Thank you ! Hope you enjoy the videos !

@@bugmouthready529 pretty sure its a 1 in 8 twist.

@@DR.DREAD1984 I love the CZ 457 PVT ! It’s not a match barrel, unlike the LRP, so the chamber isn’t quite as tight, so I think I can run the bolt a lot faster. Plus the shorties are great fun !

Thanks!

@@phillipsharpe6459 on that particular day, I don’t think I did 🤣

@@Dayattherange I shall give it a go, and post the results !

Living in the 'burbs here in Australia, I'd have to find a friendly farm owner to go after our local pests, being rabbits and foxes. Roo's are too big for the 457 !

I'm not sure we we have Auto Match here in Australia @mlone7, but I'll go have a look. And I'm going to have a look into the die .... didn't know there was one for 22LR.

Glad you liked it! Hope it helps.

@@Its_range_day 100%. I like the matte finish without the matte clear. Good info.

Great video, I’ve just purchased this exact chassis in the UK for my CZ 457, What brand / type of spray paint did you use please?

@@richardhindmarsh939 it’s called “Rust-Oleum Camouflage” and the colour is “Deep Forest Green”. I got a new can on Amazon. The clear coat is a matt finish, and I grabbed that from my local hardware store.

@@Its_range_day Many thanks Mark, all the best 👍🏻

My LRP, which has a match barrel seems to like it better, but I still get flyers. These could be me (more than likely) or I got a batch that neither rifle likes, but I do think it deserves some more testing, so stay tuned.

It's a 16in varmint barrel @BIGDEZUL.

@@Its_range_day I’ve been looking for one. Do they ever come back in stock?!

Sadly not often enough @BIGDEZUL, I ended up buying the entire rifle, then dropped it into a MDT XRS chassis I had.

@@Its_range_day I’m thinking about buying the 20” and having it cut and threaded. I’m impatient 😂

I couldn't get a 20, so settled for the 16, which in the HMR is a LOT of fun !!

I love my 22LR Trainers @marw1920 ! I had the 527 as well, in the MTR stock, and when it worked, it was beautiful to shoot, but I had so many feeding issues I ended up selling it. Your comments on TAC-22 are interesting,, as I always seem to have flyers, so it might be the batch I have (more likely it's just me), so I'll do some more testing in future videos.

It’s a CZ457 LRP (Long Range Precision), and it’s not a huge fan of the lower priced Eley. It seems to prefer SK, which is very hard to get in Australia at the moment.

And it’s pretty nicely priced as well !

@@Its_range_day Added bonus!!! I think I get it for £7 a box [50] here in Ireland, meanwhile my 7.62X54R eats £1.10 per round!

I think I was using GECO Rifle for this one @PT9mmWraith. Unfortunately it's not available in Australia at the moment.

@markfussell9313 I'm building a similar 457 right now but 20in barrel. Looks like geco doesn't export to US either.

Nice @PT9mmWraith. I've found each of my CZ's seem to like different ammo, but CCI Standard Velocity seems to work reasonably well with all of them, considering the price. If I need better accuracy, as opposed to just general plinking, I'll grab SK (when I can get it) or Eley, Norma's TAC-22 isn't bad either.

I did @BIGDEZUL, and it’s easy to take apart. The front rails are held on by three bolts, and the middle black section (with the MDT logo) is held on by two. From there you could paint the rear in one piece, but I undid all the bolts in the stock, and took that apart as well, so I ended up with two large rear pieces, and the two front rails for painting.

@@Its_range_day that’s what I thought you did. Is that a rattle can job or cerakote?

@@BIGDEZUL Rust-oleum Forest Green rattle can …..

@@Its_range_day wow. It looks great for rattle can! How’s it holding up? Did you use a primer or matte clear? Sorry for the questions!

@@BIGDEZUL I didn’t user a primer, as the texture of the XRS isn’t super smooth, so the matt finish stuck well. I think I put a matt clear coat over the top, but either way it’s held up well ! Stupidly, I repainted it in what I had hoped would be more like a FDE, but it’s too light, so I’ll be repainting it green again this weekend.

Thanks @RockyLonda-ob5so

Thanks @ykdickybill. I really need to focus on taking my time, and breathing, when shooting groups .... more of this to come at longer distances.

@@Its_range_day I shoot at a club in York, U.K. and we are just starting to organise PRS type shooting though it’s mainly bench rest , standing and prone. I love your rifle……after much research my ideal is what you have ie the 457 LRP with the match chamber and fluted barrel in the mdt acc premier chassis. Unfortunately, in the U.K. CZ don’t offer this. They offer it in a cheaper mdt chassis that is similar to yours but with a much shorter forend without the built in arca and with an AR15 style backend that they market as the ‘457 MDT’ which is not for me. I really want the ACC premier chassis…..££££££

Same here in Australia, @ykdickybill. I had to buy the LRP and the MDT ACC chassis separately. It's pricey, but it's worth it !

Yes, he needs a little training.

Probably more me than the wind @rustynut1967, but thank you.

@propionic0157 it's a 16in

@@Its_range_day ahh yes the tactical have a shorter barrel than the others like varmint. thx :)

I'll keep that in mind if I ask him to spot again @paulargent1003 LOL.

Thanks @kahn_wang

This was at 50m @Mophonic

@@Its_range_day ok, but isnt the video title missleading then ?

@@Mophonic the rifle is a CZ457 Long Range Precision …

@@Its_range_day Ah, yea seems right, but on the CZ Arms site it just says LRP Black. ok got it...but can you tell me though how far does it shoot accurate ?

@Mophonic, I've had it hitting 50cmx50cm thin steel targets at 500m ... a lot of that was probably luck, but it certainly has the ability to get there reasonable consistently.

I even adjusted the sights at one point, and made it even worse LOL

@@Its_range_day Are you sure you went the right way with the adjustment? I expected you to come well back to the left.

@@lindsayrandall5488 so did I !

Thanks @clarson2916.

Thanks @anatolipetrosyants2196. It's the first generation Pro Varmint Tactical, (purchased in 2019) which came with a wooden stock with the black textured paint. It's running the standard 16 inch heavy varmint barrel, and either sits in the MDT XRS chassis (like it is in this video), or the MDT LSS-RF Gen 2 chassis. For a shorty it shoots really well, and is probably my most fun rifle to shoot !

Thank you very much, I really appreciate it! I Like MDT chassis, but my headache is what to choose: 16 or 20 inch? 😂. I want to try tuners, but I read that for 16 inch, it will not produce any results. Did you try tuners on short barrels? Sorry for asking questions out of the video.

I haven't tried tuners on any of my barrels, @anatolipetrosyants2196, but if I was going to, it would be on the 20 inch, as I think (certainly not proven though) that the 16 inch might be a bit short and thick for it to have any effect. Those that I know have them (there are a couple at the range) are running the longer barrels.

Understood. I wonder if a 16-inch barrel can cover a distance of 150 meters as effectively as a 20-inch barrel. I'll continue my research. Thank you again for your help!

I'm heading to the range this weekend, @anatolipetrosyants2196, so I'll do a video on it, with both rifles using the same ammo, starting at 50m, then 100m, 150m and finally 200m, and see what results I get.

Thank for the tip, @MatteoSaverioGrasso, I'll pass that onto the owner, as I was just borrowing it.

Very jealous @scottorgan2255 !!

What scope and mount are you using for the number 1? I’m in the same situation as you. Just can’t see the sights like I used to.