Відео

🤣🤣 no more Stihl in my yard, sorry!

good tools are made for noobs, over complicating simple things is just dumber not smart

​@@gheroshyou overcomplited simpliest chainsaw ever, and its extremely good light weight chainsaw so you noob because you sitting and completely complaining while you could cut some trees down and make some profit

@@marcuslc7985 now way! peace of mind is more important than money, I give it for free to another Stihl fanatical

@@gherosh tell me then what is better than this saw or similar price in comparisor whats the best chainsaw in general???

@@marcuslc7985 the one you like and feel comfortable to work with, I am just not a Stihl guy, go with Husqvarna (the Mercedes of chainsaws) or Hecht (the fair one, best value for the money, without brand fee yet). Not a professional chainsaw user, other brands could be better or worst.

Very low power but good for engine breaking lubrication downhill

@@gherosh Mines quite cold blooded so ride off with the choke on if it still hasn't warmed up fully - produces some awesome 2 stroke smoke😁

@@dt125guy7 I use 16 to 1 fuel mix, quite smoky when cold and with big head, good on summer for cooling, not so good on winter, too much cooling 🥶

@@gherosh Not sure what fuel mix is on mine - responsive and rides fine when warm just like plenty of choke time when cold. Your runs nice🤩

Very soft, fagus sylvatica

Off the bike, something got wrong with it, pending diagnostic/repair 😳

G Parr Parrr! 🤣🤣🤣

Yes, lots of fun but you have to enjoy maintenance. I just don't feel as free on eWhatever comparing to any kind of internal combustion.

mulgi vacili 🐄🐄🐄

Great tip! Thank you! Hecht bar and chain seems good quality, no replacement needed.

Sorry to hear that! Maybe you can return it and get a fair brand.

Ja, ohne Kettenöl im Paket verwende ich das verbrannte Öl aus dem Automotor

Awesome! Thank you!

Back in ol'days where good chainsaws, our days there are better and cheaper alternatives.

I'm the next Lars von Trier, so you know! 🤣🤣🤣

Не делайте так, как я, я рискнул, в конце концов, это рассчитанный риск. После многолетнего опыта вы уже не применяете правила безопасности для новичков (google translate).

Dumb as I am I need a dumb saw. I have other meaningful things in life to think about. Not worth to sped my mental energy to operate an "intelligent" saw.

@@gherosh Crawl under a rock. The saw is fine.

@@achap6376 fine for you, not for me. Happy sawing!

🐓

Nechtěl jsem ji nutit během doby vloupání. Zůstaňte naladěni na arboristický klip :D

No that you mention it, quite psychedelic video I made 😵‍💫

Thank you! Good to know for next time.

@gherosh some people have a problem with clutch burning I think the springs are too tight. I had a belt drive straight shaft it used a bushing which burned up. If you can find springs that are not as strong it should last.

@@WillB-lv1xg Tried softer springs and smoked the clutch few times, it engages at lower rpm and stays more time on friction. It's quite step the mountain area I live in.

Thanks for the tip! Some performance parts on my shopping list.

@@gherosh I just got a new exhaust and it definitely helps very much.

Shitty, shitty! but it's my shitty and I am proud of it!

Sorry about that! There are tons of video and tutorials, hope you find one that explains better for you. Thank you! Good luck on fixing yours!

max. 10-12km/h (6-7mp/h) p.s.: I am fat, big displacement :D

Self explanatory video: removal of parts to reach the timing belt, replacing the timing belt taking care of crank and cam shafts alignment, put the parts back in inverse order of taking apart. As is a non interference engine very good for learning.

Removing is the hardest part in 99% cases when doing it for the first time, assembling parts back it's the same process in reverse order.

@@gherosh ua-cam.com/video/WprT0H8PUfs/v-deo.htmlsi=VAbvpoJEl-D4-yT1

Indeed Sportyak Bic 245 it's nice micro boat, I do not know from where to buy in USA, I live in Europe; try google for it.

Thank you very much for your sincere response.

Indeed, not holding up in time, goes away quite easy.

In 4 years and about 20,000km/12,500miles, 60% on road / 40% off-road use - the treadwear is about 80% (20% used), budget tires, worth the money (at least for me), the best budget compromise all terrain/all weather tire when you don't want to change tires all the time, less noisy on pavement big + for a noisy car. Had only one puncture with a self tapping screw and I went in some nasty rocky/briery places. Fair on snow, not so good on ice, but it's a compromise, one of the best. ✌

@@gherosh Thank you so much! Just the kind of information I needed. Truly appreciate every bit of it. Nice truck by the way. Cheers!

@@bravosixgoingdark9337 Glad I could help!🤗

@@gherosh Thanks for the response, you got yourself a new sub! Lovely Suzuki offroad playlist btw 🤗

Thank you! @@bravosixgoingdark9337

Friendly with your back, lightweight and small chainsaw, you can do even your fingernails with it. 😀😃😄😁😆😅😂🤣

Thanks! Yeah! Mo powa, babeh! mo powa! Wanna try 56 tooth sprocket next. U2 ride safe!

Cornfield is in Romania, near Fagaras (45.84791296750335, 25.03658230427664). UTB 650 was the most successful model produced at "Uzina Tractorul Brașov" known internationally as Universal Tractor Brașov 1946-2007. This tractor from the video was build around 1980, more than 40 years in active service, had a few engine rebuilds, one drive train rebuild and power steering upgraded.

@@gherosh your area, the lands look good for production farmers and I have lived in the GREAT Lakes region of USA. most of that land looks like your area good for farming.. I'm happy to know you have a good tractor and can keep it running. Thanks for sharing your videos. Have a great new year. Peace to you and your family, PEACE.

@@josephmurray3583 Thank you! You too! Let there be a peacefully New Year for everyone! 😊

48 tooth sprocket excellent for hill areas, for mountain areas more torque needed.

​@@gheroshthe 44 is perfect for most situations even pulling my trailer up the steepest hills around here the yd 100 is what you want for reliability

with more than 12% slopes around me even 48 tooth sprocket is too small

Go for it! An old bike + ~$100 motor kit.

Agree, next time will do.

😀😃😄😁😆😅😂🤣 still fully fingered human 😀😃😄😁😆😅😂🤣

😅

😀

Got old, not as fast as before anymore 😅😅😅

There is no reason to drop ergonomics just to stand out in front of the competition in stupidity.

Ewend china still can be better ,,for a smal price if maks 50% but better engine noubady didnt make only ingeniers if Mr,Jonsered..,end its werry sad way this ingenius worck of hus masters piece us not putem in all chainsawes,,,that was in 2004 end after that time all ewend china on that patent nake a saws end noubady didnt oay that,,,like to Tesla noubady didnt show respect......how say old masters,,better 1 good worck than a bunch of garbidge

Thank you for taking care of me!

Advertised as 80cc, like 66-70cc in reality (47mm piston bore, I want to measure the stroke one day and do the proper math). With 44 tooth sprocket top speed around 40km/h. With 48 tooth sprocket top speed around 35km/h.

But of course I am incompetent user! More than that I am also lazy and dumb, I should be able to put the cap on with my eyes closed from the first try - not the case with this one. Some stuff are made for fancy users who likes over-complicated things.

@@gherosh If you say so. After all, who doesn't expect to be able to fuel up their chainsaw with a blindfold on, and publicly criticize the product when they fail? I own 2 saws with this cap and it isn't hard...at all.

@@rbhe357 They are good saws, but not for me.

I've had 2 oil caps break because of debris got between it. But you just need to chill start at 4 o'clock turn slowly to the left with light pressure. It will grab it keep turning till it clicks then flip the black part. But if you turn the cap a bunch of times it might be in the closed position no worries you can set it at 11 o'clock and turn it like your opening it, itll pop open then go through the steps of closing it. Main part is relax and breath. Take your oil cap off the saw hold it tight and twist back and fourth watch it closely eventually itll make sense

It is a bit of work but you get the central locking back on remote control. Got lazy to use the key 🤫

Glad you enjoy it! Shihl it's just not for me, I hate tools designed by office engineers never going out on field with the tool. Clearly I am not a stihl operator, I am lazy operator, I am a lame operator, I like tools designed for dummies like me, stihl is not for dummies.

​@@gheroshno worries it happens... I bought the ms250 and never got to really put it to its potential... after 6 tanks I had trouble getting it started.. cord was hard to pull due to high compression... the dealer sed it ran fine but never did... I ended up selling it for $100... I lost $300 but it's okay.. I bought the ms211 new.. not an issue... really good performance for occasional use... I dropped a tree for firewood with the ms211... smooth..

@@IvanHernandez-kz5uq yes, I can go over the caps, over the asymmetrical chain, over the filter but I can't go over the stud issues. That's it, sometimes you win, sometimes you loose. ☺

@@gherosh I'm not a know it all on this but a chainsaw is a must have tool.... it does not matter if your a pro or beginner it's all for the same purpose... I personally don't like chainsaws and the whole cutting trees down etc but it's a necessity. It saves me money to have my own firewood for winter... I had an older echo top handle, loved it's performance... small very light but lots of power from that little saw... only issue was the fuel tank was leaking, I couldn't fix it so I sold it for $40. The buyer managed to fix it and uses it almost daily.

Thank you! Eastern Europe, Romania.

avec plaisir, mais je suis passé à Jimny

I was not expecting commercial/professional level results, I know what I bought is hobby/non-professional rated product, but this is not an excuse to sell crap especially if you are a big brand.