Відео

I'M DISSAPOINTED ON THE RESULTS THAT NONE STANDS OUT ABOVE THE REST. I USED BLACK MAGIC WET SHINE LIQUID WAX. BEST I EVER USED. NOW THEY ONLY MAKE THE BLACK MAGIC WASH DETERGENT. 😒

Is not u is the fake holder they gives us

Mate we gonna spend more on glue that try to fixed the damn dent ?

I've been using Nu Finish forever. In our climate there's about 5 months where the weather is too bad to wax the car, and Nu Finish easily lasts through winter.

How did u make out

What??!! It’s the best purchase I’ve ever made!! My 3000 has a red button, like everyone is saying, that you use to give power to a dead battery. Not sure why the 4000 doesn’t? I’ve jumped about 30 cars on the original charge and still half power remaining. As far as the one person saying it doesn’t charge their phone well, my iPhone 15 Pro Max charges in about an hour. They need to buy a better cord.

Hi, I was wondering why you never reply to my email

I seem to be having the same or similar problem. I know it’s probably a long shot, but do you happen to know the part numbers for the line sections you replaced on the front brakes?

I didn't have that equipment so what I did was tie my car to a lamppost and drove away hoping that the dent would pull out.. Well ...it didn't pull out, but instead the lamppost fell onto the roof of my car and now I have another, larger dent on my car roof and the front windscreen also cracked.

We are having all the same problems. Ugggg 🥺

The good thing about and induction heater is that it can be used near a rubber coupling for example without it melting. Drape a wet rag over the rubber coupling before using the induction heater but its so much better than using an oxy torch 😊

You can tell right away the glue is the problem or user error not allowing it to set long enough

The great wax off

This could be too little too late but it needs to be said... it's refreshing to see someone making content that is informative and straight to the point. Also I commend you on being authentic. Being able to say you maybe made a mistake overtightening and not editing the replacement part is spot on to what your viewers and John q public will inevitably go through should they decide to attempt it themselves. Good job guys

This is a NOTORIOUS issue on the Lexus ES330! The problem is that it will happen again. You can also use a hanger to unclog the sunroof drain. The Lexus is great, but this was definitely one of those WTH problems. Thanks for the great video!

Yes.

I recommend x-shine pure cream carnuaba wax ive tried them all meguiars turtle wax chemical guys mothers is good pennicle souveron is very good but expensive and theres others that are crazy expensive but for the diyer i dont recommend them good luck bro

How much does it cost

Slide hammer all the way 👍 i never had any success with any of those tips you used. The only tips that worked were the ones with a dimpled 'golf ball' surface which worked well, not sure why. Maybe because i was able to scrub the surface of them with alcohol, whereas the patterned ones with lines are impossible to clean properly. Also with sharp dents like u have in the truck, i believe your supposed to gently knock down the sides of the dent (crown) to make the dent wider & more shallow, which allows it to pop out easier. But lets face it, without the proper skills, and without proper tools that push from behind (most important part) , this stuff is always going to beyond most people's capabilities.

Apply heat to the area b4 applying the glue. Metal has memory of sorts. Heat expands while cold contracts. Kind of like shaping a knife or sword. We've been using heat to shape metal for thousands of years. Doesn't make sense to stop now. 😉

Nice video. I'm about to buy a real nice 2012 for $1000.

Misfire not solved on this end. First of all great video. I have a 2008 Buick LaCrosse 3.8. It has p0304. Has excellent Spark. Has new injectors. New coils new ICM, new wires and plugs excellent spark. Compression test cyl 4 at 150lbs with the starter motor consistently. After the 7th time testing compression it cranked up and was idling and i checked compression gauge And it was at like 15lbs....miss miss miss.... while running of course no plug while checking compression. Replaced plug, still missing p0304. Im thinking low rpm with starter, 150psi. High rpms 15psi. Maybe sticking valve? Any thoughts? Ever seen anything like this before? I'd hate to pull the head and find out I'm not thinking about this right.

That paint nereds a lot of work! Those water spots aren't going to be easy to remove. There's not a wax in the world that will look good on that car without some xserious elbow greese!

I have a 88 trofeo it has a series 1 i replaced the module wires and plugs and its running pretty rough with a misfire im thinking cam sensor at this point but maybe a faulty module? It shutters and stumbles, im jus so new to all this

I use to use step 1 2 from mcguilars that was super shine

He,did other things Wrong. Me Granny has Toyo,, too. And she changes it every 10.000. Miles. She uses Castrol. Edge🎉🎉🐅 🐯 🐅 🐯 🐅 5.W. 40!! And Purolator Boss. Oil filter,,. Her toyo. Corrolla.Corolla.. has 500.000!!MILES.. IT RUNS LIKE NEW🎉🎉🎉TIGER 🐅 🐯 🐅 🐯 🐅

Thanks for making this video. I too had the issue with the brake hose (I think). I changed out the pads, rotor, caliper nothing fixed the problem. My brakes go so hot they caught fire and burned up everything. Had to buy everything for a second time. Hopefully this will fix my issue.

You just don't know how to use it when the battry completely dead u have to press and hold the little red bouton to force it

If it’s dark, I’d leave it alone. Just speeding up the failure, it happen to me. But it’s up to you.

Thanks for the info I'm doing a 08 jeep compass and i had a little bit of time on the front bolt since I couldn't see it so I just use the grinder and cut it since you could see from the bottom

I’m a believer if you only do long journeys as I do manufactures figures are fine!

I forgot to buy Isopropyl Alcohol for cleaning the surface of three noticeable thumbnail-sized dents on my black car door which would have meant a 40-mile round trip to buy some from town. Still, luckily wifey said to try using some Hand sanitiser which we had because it was 70% alcohol. Amazingly it worked like a charm making the tabs stick well, but, I don't know if it would work as well on larger dents... But if you're stuck for a quick fix it might be worthwhile!

You got to clean the spot where the dent at to get a good stick

I used it on 2 of my cars...dents about the size of a dime. I was pleased with the results of removing about 90 percent of the dent. It takes patience and making the process about 3 or 4 times. I did not use the slide. Had to let the glue dry for at least 5 minutes. Also, used the tool very slowly and gradually letting it slowly stretch the metal back into place. The glue came of with a little alcohol and using the plastic scraper and my finger nail. Read the comments of people who have had success there is good suggestions. One thing I was suggest about using a heat gun...it will take longer for the glue to cool if the metal is hot. In the instructions it suggest not working on a hot hood so if your heating a body part with a heat gun the glue will not stick as well. I would not use a heat gun.

Thank you very much. I think I have same problem. I noticed my oil is low and it stalled while I was at stop sign or braking at red light. Until I added 3 qt oil to it. Problem seems like solved. Again. Thank you very much

member oil is cheap engines are not

that motor is total crap

dat kirkland is pure crap

The paste sticks in the cracks and I can't get it out. It stays there for years

It doesn’t charge my phone too much

Just found your video, I’ve been looking at getting one and your video is awesome. Thanks for the info

Great video 👍🏽 thank you for your efforts

So hard to watch this video. Complete lack of basic PDR technique, like using IPA to remove the glue. Did you even watch a skilled PDR video on UA-cam before attempting this train wreck? I've seen people using hot glue on the end of a hammer handle do a lot better job quicker.

Supertech 5 qt oil $17-23 + Supoertech filter $3-5. Oil changes are not a lot of money!

All seem same but new finish seems to be the worst.

You are spot on. Oil is cheap!

I used to use the turtle wax ice liquid wax but they have discontinued it. It was the easiest wax to apply and remove. The wax came with a sponge applicator that you applied by just running across the paint. You would let it sit for 30min, wipe off the excess, and then finish with a clean dry towel. The best part about it was that you could apply it on hot panels in direct sunlight and it didnt matter.

I like your root cause diagnosis to many people are cherry pickers.

I have worked on two vehicles now, nice for friends to let me practice on turds before I go onto something nicer.

how long is the cable? Might work for ice fishing if it is water proof.