Відео

Thanks for checking it out. If you email me at tinytrailers4bigasventures@gmail.com I'll be happy to go over costs with you. I don't like to post them here because the trailer in the video is set up a certain way and priced as such. Some people will think that price is the same for any build and it gets akward sometimes.

Thank you

Thank you

Thank you. Me too.

Thank you

Search "barn doors to ramp" in the UA-cam search bar. I just did and found several videos.

When I connect, it shows as "car" then some numbers. It doesn't show as Green Yi or camera.

Thank you

Mo, I just build them out after the customer buys the trailer. The 5 x 8 cost her about $7500, including the trailer.

Thank you

I think it will stay on as long as there is 12v to it.

I didn't get any pictures of it in deck mode. They use 2 of the pyramid type jack stands to support the ramp and they have 2 camp chairs to sit on. She did get magnetic screens for the side door and ramp door openings.

Thank you and I'm sorry, I don't recall getting an email. Resend it and let m we know what you're looking for and I'll get with you for sure.

Oops. Didn't catch that. Thank you

You could try to extend the antenna (the short wire) and see if that helps. Make sure the antenna is not right next to or touching metal.

Thank you. Fortunately, he's got himself into an apartment and headed in a good direction.

Thanks for checking out the video. I don't have a tutorial, I just get an idea, draw it out and build it. Based on today's cost of foam board insulation, it should cost about $200+/- to insulate with 1" foam board.

@@TinyTrailers4BigAdventures thanks for your quick response! Also, that’s good to know on the insulation…sounds pretty reasonable.

Thanks for checking out the trailer. Good luck on your build.

I believe so. It's been a while since I installed it.

Try deleting the app and re-installing it. It should be the Joy Trip app. Also, be sure the little "antenna" coming off the camera cord is not really close to or touching metal.

Thanks for checking out the video. Glad it helped.

I'd be happy to, but I couldn't get to it until next fall. I'm working on one now, then I have to have a hip replaced. If that time frame works for you, reach out to me in August and we can figure it out.

Try connecting to a constant 12v source, uninstall & re-install the app and see if it will connect to your phone. If not, contact the manufacturer. I did not connect to a back up light, I used a license plate light. When I used a back up light, every time I had to go out of reverse and back to reverse, I had to reconnect the app to the camera. Now, I just turn on my lights, get hooked up & turn lights off. A bonus is that at night, I have a rear view camera if I want to use it.

@Tiny Trailers 4 Big Adventures I have it directly inline fused to the battery ,,,I've installed and reinstalled the app 5 times checked all my power sources,did QR code 5 times, I did everything and nothing happens.... Should it not be inline fused ?

@@The_Hollywood_Mission - I don't see where a fuse should make a difference. When you open the app, do you get a message to connect to device wifi? When that message comes up, you should confirm it, turn your phones wifi and connect to the network that says "car something or other". Connect to it (it is a wifi direct connection) and the camera should work. If not, contact the mfg. BTW -Have you checked your inline fuse?

@Tiny Trailers 4 Big Adventures I have checked my inline fuse and it's good, i used a test light and its good,when I hit the confirm to Wi-Fi I don't have anything that comes up showing CAR,only my 2.4g and 5g network

@@The_Hollywood_Mission - The only thing I can suggest is remove the camera from the vehicle, set it and your phone side by side,connect camera to a 12v source and see if your phone reads the camera. If not, contact the mfg.

I don't recall the name of it, but it was the smallest 12v winch that Harbor Freight sells.

Thanks for checking out the video. There are 2 floor vents under the bed to allow air flow for the batteries. AGMs are designated safe for indoor applications with proper air flow.

It weighed 3300 lbs when it was done.

Thank you. If I was to do it again, I'd put a sink in the big counter top, delete the sink in the bathroom and put a floor to celing cabinet in it's place. More storage is always a good thing.

@cheapwanderer9218 - Thank you. I can't believe it's been 5 years since that build. I'm still sore from up & down the ladder doing the Henry's on the roof.

@@TinyTrailers4BigAdventures For an aluminum roof would you still recommend that same Henry’s coating?

@@gerrycollins9409 - Absolutely. Tropicool is silicone based and is more "flexible" as the trailer goes down the road. My only issue is the cost - $100+/- per gallon. I've also used Henry's 587 Elastomeric coating. It needs toouching up every few years, but at $30/gallkn (Home Depot), it's a viable alternative. Whichever way you go, prep is the key. Follow their instructions and you'll be fine.

@@TinyTrailers4BigAdventures I have the same opinion only I use Blackjack 1000 from Lowe's. I touch up every year but mostly because of the insulation value.

I don't have the trailer anymore, but I built an end table out of thecounter top cut off and it still looks great.

The metal around the side and rear doors is the original factory door trim. When changed the rear door from a ramp to a side swing door, I got rid of the ramp frame, built a new frame to accept the ac and re-used the original aluminum skin and trim.

Thank you for the quick response 😀

Interior height was 6'3".

@TinyTrailers4BigAdventures wow! I don't need to stand up straight but I want to be able to stand up and change clothes pretty well and have enough space to function! Thanks.

Thank you. It works really well. I wish I could take credit for the idea, but I got it from another UA-camr - Camp And Camera. It makes dealer with non-RV doors much easier.

The intake & exhaust goes through the floor. The condensation goes through the floor as well.

@@TinyTrailers4BigAdventures Any pictures of how you did it?

@@mikestone9129 Send me an email address and I'll send you pics of the whole process. tinytrailers4bigadventures@gmail.com

It is a Heng's Vortex ii insert. Here is a link to it. amzn.to/3IQkMPR

Thanks for checking out the video. They 90% stay at places with hook ups. The other 10%, they use a 2000 wat generator. The solar was designed to run the fridge while the trailer was being towed, the vent fan, and lights. The microwave is a 700 watt rated unit but it actually draws 1100 watts. The ac draws 500 watts and along with the microwave, runs solely on shore/generator power. There is not enough room on the roof to put on enough panels nor did they have the budget for enough batteries to run the ac on solar. The tongue & groove on the walls and ceiling give the illusion that the trailer is bigger than it actually is and the light color keeps it from feeling like a cave. I'm working on a plan to be able to make the sofa/bed system in a free standing unit to be used in bigger trailers.

@@TinyTrailers4BigAdventures cool I was looking for a lightweight trailer but it has it's negatives. This trailer would be good with a mini van and then you would have more roof space and battery space as well but with all solar installs flat on the roof is not very efficient. 73

Thank you for checking out the video and the kind words. That trailer was a fun project.

Thank you. The windows came from Shed Windows and More. shop.shedwindowsandmore.com/shed-windows/

@@TinyTrailers4BigAdventures Awesome ! Thanks for the info. Much appreciated.

I honestly don't know. When I have my camera powered up first and open the app, it always asks to be coneected to wifi. That may be happening because the connection between the camera and the display screen (in my case, my phone) is a wifi direct connection, not a true wifi network connection.

Thank you. Appreciate the kind words.

I'm glad you found something that could help you. Any questions, just ask.

1580 lbs

1580 lbs

We both know who that will be.

Thank you. I appreciate the kind words.

Thank you. Once a lock is put into the flip latch, the bar can't go down far enough to hold the door closed. We have tested this onseveral trailers and even 7 year old girls can open the doo with no problem.