Відео

They are fuel gripper AT tires. i pit the link in the description! Thanks 🙏🏼

The dealership installed them. their GM

Stock front with new rear shocks (included in the kit)

All right dude well thanks for the view !

If I could go back and change it I would only lift it 4 inches (unless you’re planning on getting 33s you might need the 6 inch!) The lift is fantastic no lean super easy to install. The link is in the description of the video !

Dude thank you! Inflation may have added to the price of these things but id say my largest expenses were obviously the wheels tires and lift about 3k (lifting a 2wd much cheaper than 4wd) and another $300-500 in installation & alignment. Rhino Liner $450 bed cover was like $200 Side rails $250 and then the little touches of customization $50 bucks here and there. I spaced everything out over a year. (i put links to everything in the description) If i could go back and change one thing I would recommend a 4 inch lift not 6. other than that go wild !

@@jesse_dok I’m not real tech savvy 😂 where is all the links n etc ?

Thanks!

Yes 265 70 17 just about 32 with the aggressive tread!

Thank you Jesse! Do you remember the offset on your rims? They have a perfect poke out of the wheel well without too many crazy rock chips getting impeded into the paint.

Much appreciated!

+1

Thanks !

With this set up, none at all, if you introduced a wheel with a different offset or had spacers on I can potentially see some rubbing happen

Thanks I agree ☝️

Ahh yes the ole Tried and true they got everything on there a tale as old as time.

Thank you ! Yep no spacers just wider stance with the new setup.

Thanks for the view and the comment! I’m not running wheel spacers . Poke is coming from the offset (1) of the new wheels and the wider tire. I had the spacers on for a total of one minute before I decided it was way too excessive.

It makes sense for me! I go off roading all the time. Thanks for the view and comment 🙃

@@jesse_d Well, enjoy it. Good day, sir.

Hell yeah! Solid setup

Thank you !

I don’t ! I had them on when I was running the stocks but this new setup didn’t feel like I needed them. 2 inch spacers borderline had some rub on the new fuel tires

I have a 2021 Z71 as well. Stock 165/65/17. The wheel wells stick out half an inch further than the wheels. Thought about spacers. However your 165/70/17’s look perfect. Or, is it your rims? Thank you for the reply.

@@gregschmaltz3609 really happy with the way the wheels and tires turned out had the perfect amount of “poke” I will say, though, when I was running wheel spacers on the stocks, it looks pretty legit! As far as which wheel/ tire combo to go is entirely up to you, I think it the poke has less to do with the tire size and more with the offset of the wheel you choose !

Thank you ! Duramax 😍so much fun !

very cool ! that thing is gonna look sweet with the kayaks and I know what you mean about the rooftop tent :( haha maybe one day.. www.amazon.com/Dee-Zee-DZ87009-Heavyweight-Bed/dp/B00OLVGEJA/ref=sr_1_3?content-id=amzn1.sym.d3f43d11-fd5a-4179-8b1e-1a03d11e07f4%3Aamzn1.sym.d3f43d11-fd5a-4179-8b1e-1a03d11e07f4&crid=1FSKPQR8O0MVY&keywords=rubber+bed+mat+colorado&pd_rd_r=9bb2f1fe-cbbb-4cd8-9df7-2ce2c35ee820&pd_rd_w=8G6jj&pd_rd_wg=08Ui0&pf_rd_p=d3f43d11-fd5a-4179-8b1e-1a03d11e07f4&pf_rd_r=H73KBW8DY65VHPGMYDRX&pid=ahUNStG&qid=1670222488&sprefix=rubber+bed+mat+colorado%2Caps%2C370&sr=1-3&ufe=app_do%3Aamzn1.fos.18ed3cb5-28d5-4975-8bc7-93deae8f9840&vehicle=2021-47-2484-434-224-53-6-7-21858--8-1-2835-209-&vehicleName=2021+Chevrolet+Colorado

Appreciate it bro thank you !

It’s just you ? Thank you!

No sir! all stock. I’ll agree mine sounds more beefy than most…,

Thanks man appreciate that! It was fun. and relatively easy coming from a total novice!

That things gonna be sweet !

33‘s fit no problem I don’t see an issue with 34s as long as you’re not running any wheel spacers. Unfortunately no spindle lifts Will not work on a four-wheel-drive :( you have several more lift options though!

Removing the letters were a lot easier than expected first I framed it off with painters tape so that I could get the exact same angle when putting on the new ones. I used a hair dryer to loosen the adhesive on the lettering (you can use a heat gun if ya got one) and a plastic pry tool to pop them off. I used a paint friendly mineral spirits to remove the gunk left behind. Replacing the lettering was as easy as peeling off the back and lining it up with the painters tape I had set down before removing the chrome ones I have seen people straight up cut off the air dam leaving about an inch or two behind still gives you the clearance and the look you’re going for without having to hassle underneath the vehicle recommend that if you plan on throwing it away anyways and have a steady hand! Best of luck thanks for the view and comment

@@jesse_d Hmmm. Cutting it off is actually not a bad idea. Thanks for sharing that tip. I’ll search videos to find one that showing the cutting approach. Jigsaw, I’m guessing. Hmmm. Wheels are turning now. Thanks, again!

Oh! And thanks for th explanation re: removal of the letters. I’d likely have ended up one of those who put new letters on all wonky. The painters tape is brilliant and a hair dryer/heat gun is so easy sounding! Hoorah!

@@jesse_d RoadTripLover 0 seconds ago Oh! And thanks for th explanation re: removal of the letters. I’d likely have ended up one of those who put new letters on all wonky. The painters tape is brilliant and a hair dryer/heat gun is so easy sounding! Hoorah!

I have a 2019 as well and all I did was use a sawzall and cut all the pins right off

Also, do you mind sharing the link to the hitch shackle you have?

@@connorlevandowski8362 www.amazon.com/gp/product/B07MBZ1L8B/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

@@connorlevandowski8362 i've got a couple more mods in the works. ill deff post it when its ready. thanks for the Comment and view.

Think it was about 75$ price is way up right now though :(

I don’t see why if you only drive in the city!