Відео

Whether thru truck speakers, home stereo, or at the concert, those last ten seconds, and The Professor has my undivided attention. RiP Neil.

WAS looking into one of these... But considering I live in NH and have many steep hilly areas and seeing you have to keep momentum to keep her going while pulling I guess this aint for me lol. Shit if I had the time and garage I would LS swap it if anything. But great vids. Even if i do not get one I enjoy watching your progress with this vehicle.

DUDE!! That bass drum sound is epic!!

THANK YOU FOR THE INFORMATION.GREETINGS

My left ear! oof! Nice job though!

Any reason why my generator on propane runs more stable and less noisy while the choke is ON what is that all about. and Yes this is running on Propane..

assuming the original angle needs to be 135 to sharpen at 135??? right??? or 188 visa versa?

All you have to do is throw away the useless manual and do it the way this guy does: ua-cam.com/video/sZRVjo8h5u8/v-deo.html ^ that technique works well for me. It's almost like the manual was written first and then they built a different machine to go with it! lol.

I am starting my journey trying to fuel the generator now. I see the 'God' complex already with my local propane company. They wont touch a non permanent home generator set up. Thanks for your work on this.

I just got the drill doctor 500. I also couldn't figure out the 135 point placement. Drill dr. should of made a 118 notch & a 135 notch for the alignment part. Also you are correct about the instructions, totally useless. Thanks a lot!

Did the radiator and water pump work out?

Please, What is the part # or model for the 2 stage regulator? The link you have in the description for amazon is not working. Thank you

I have this inverter & I must say I was not impressed with Terminals, only covered with a small plastic cover. I could live with that, seeing my Inverter is not accessible normally. The 12Vdc input & the 230Vac (Australia) output circuits are not electrically isolated. It suddenly stopped working so I suspected one of the fuses. Unfortunately, after examining all the fuses, isn't that fun, they were all fine. So, I don't know what it is. It looks like I may have to replace the Inverter. The Australian Govern Solar warnings site has issued this warning. The energy product is a EDECOA PURE SINE WAVE 3500W 7000W 12V 240V Power Inverter Camping Caravan LCD, Model: DPP35 The inverter is considered unsafe for the following reasons • Access to live parts / terminals (i.e. 230 Vac) without the use of a tool; and • 12 Vdc input and 230 Vac output circuits are not electrically isolated. • The inverter does not comply with Australian product safety standards, and has been involved in a shock incident that our office has investigated. • If you have purchased this inverter, I advise that you cease using and dispose of it.

I have a 2640LMT with free life time map updates as of 2024 map my hard drive is now 97% full. So my question is how many map up dates could i possible remove ?

Peart

The right setup, but on the wrong generator. Those Chinamax machines put out dirty power. The THD is 12%, which is not recommended for anything electronic.

The echo needs a little eq, cut the lows and boost the mids, listen closely on the record to the kick drum.

Classic😂

What's the suspension lift brand and how does it tow and pull

I clicked on the link for the regulator but did not work ? Can you tell me what brand and size I have the same generator

The link to the regulator isn't working. Is there's another link? Help TIA

Amazing video

Sounds so good

Yessss

The Echorec was big with Pink Floyd and The Byrds/CSNY as far as I know….but with drums I’m not sure.

This groove is Bonham’s best. So much going on in this song. Have always loved it.

Your right hand is going NUTS 😂

Bonham’s drums were so unique!! Great job!!!

Thanks for including the GPS coordinates!

Thank you very much… Have you thought about selling the entire kits as a side hustle… You did a fantastic job

Thank you so much! I was in a jam with a 1/2 carbide bit in the mid of a project dulling out -_- I did the same exact thing you were doing. I pulled out a flat bit like what the heck! Then I also had a super aggressive cut. I was able to take a flat bit, restore it, and split tip it so it looks beautiful - am heading to finish my project. I was watching videos like you said you did trying to figure out what was going on. The directions are crazy, for something so simple they could have done better but the machine with your instructions makes an amazing tool in my shop! Thank you!!

Good theory with thise plastic hand wheel fittings to connect...... They just dont hold up over time and crack.

Thank you. Very helpful and easy the way you did it.

Beautiful trucks ❤❤❤❤❤❤❤

I just revisited this video as I was looking for information on sizing a regulator for a Duro Max XP10000EH that I recently rebuilt, the manufacturer told me that it’s BTU consumption is 152,000, I’m waiting on the secondary regulator that’s mounted on the frame to arrive from Duro Max and in the meantime I need the proper sized regulator for a 100 pound tank. I called Marshall excelsior and spoke with a guy about it and he said don’t even use the regulator on the generator frame because you don’t need it, it won’t work because both are 11”, plug in right into the carburetor he said. Anyway I don’t know much but that doesn’t sound right so I ordered a Flameking regulator from Amazon rated at 160000 btu (close enough) for $17 dollars, I see you used the regulator on your 12000 Duro Max. I have been using the Marshall excelsior MEGR 291 rated at 175000 btu on my Duro Max 13000EH since 2021 thanks to your help and was I grateful during hurricane Ian no power for 2 weeks! When I get the new regulator for the 10,000 I’m going to install it and I’m going to run it with the flame king regulator then I am going to try it with the Marshall Excelcior 291 and see.

This was very helpfull for safely removing a map from your device. Thank you very much.

Very cool

You could use the audi/vw OEM refill hose to avoid spills and burps. Code 000012499

Hi. Thanks for taking the time to make this video. I purchased all the equipment you recommended. I'm still not able to get the generator to run on the 100lb propane tank. I can start the generator on gas and then switch to propane and turn the fuel switch off. It will run for several minutes then die. I can't get it to start on the propane alone, either. Any ideas? I have the same generator as you, just the Durostar version.

Some of the easiest vehicles to work on, on planet 🌏 and this dude pays everybody else to do everything for him...😂😂😂... 🤡

Thank you so much for this. I bought my drill doctor 750 back almost 10 years ago now. I was so frustrated because my drills kept coming out flat and useless like you described. Tired of spending so much on Cobalt drills and having a stock pile of full ones, I decided to pull the drill doctor out. Thank goodness I found your video!!! I was ready to throw my drill doctor in the trash!!

NOCO is CRAP with great marketing. I have two of them which lasted less than a year. I love my Mr. Heater Buddy heaters. On a personal note, you say much which you think is true but is not. Some people call that lying.

Which side is gen 1

Geeeez I don't even want to know how much this thing would cost to make in today's world 😢

I love the tone of that bass. What is it?

It’s not that inspectors have a “God” complex. They are not paid to or allowed to be designers. They are taking a big chance when giving advice on the code/design issues. It’s because people will misconstrue or hear what they want to hear. Then when something goes wrong the inspector gets sued. And if you think they have immunity that is mostly true but not completely. Even if the inspector wins in court they still suffer damage and will have been slandered with no recourse. The trouble is, you will say you won’t hold the inspector responsible but when something goes wrong you will sue that inspector. We as the people have over regulated ourselves to death and nobody will in reality take personal responsibility. Sure a homeowner can do their own work but in most cases they won’t. They want the inspector to tell them how to do it and then they hire cheap labor and cut out the licensed qualified contractor who has earned their way. I would never want to take the right away from a homeowner to do their own work but don’t expect an inspector to do it for you. It’s not fair to the inspector to be put into that compromising position.

modern thin neck or the typical import baseball bat neck ???

Is it overly heavy?

Agreed, the manual sucks. It’s okay, until it gets into looking at the cutting edges in relation to the horizon…WTF, seriously?! So I ignored that part and the bits came out just fine if I wanted a 118 degree point, but their explanation about 135, they might as well have left it out of the manual for all of the good that it did.

Just got my 750X delivered today. I already found this video helpful. At a glance, I could see the obvious "118" position, but I wanted to know how to achieve 135 degrees. I just got a master drill set from Chicago-Latrobe in 135 degree split point, specifically for their ability to drill into harder material. Thank you for making this video! I'm subscribing as a fellow prepper!😊