- 91
- 458 800
Cottonwood Construction
United States
Приєднався 4 лип 2022
My name is Noah Slusher and I run a small general contracting company in Salt Lake City. I enjoy showing others what I am working on and some tips and tricks along the way. Follow along as I take on new challenges, both big and small, and learn something along the way!
I have created a Tool Planning webpage where you can find a list of all the tools you will need for various jobs such as Bathroom Demolition, Adding LED Ceiling Lights, Laying LVP Flooring, and Drywall Repairs. I will continually be adding more jobs with more lists of tools. Find the link in the "Links" section of my page.
If you would like to schedule a consultation with me to get advice for an upcoming project or to ask me questions before tackling a new home improvement project, follow my link titled "Consultation".
As an Amazon Associate, I earn from qualifying purchases.
I have created a Tool Planning webpage where you can find a list of all the tools you will need for various jobs such as Bathroom Demolition, Adding LED Ceiling Lights, Laying LVP Flooring, and Drywall Repairs. I will continually be adding more jobs with more lists of tools. Find the link in the "Links" section of my page.
If you would like to schedule a consultation with me to get advice for an upcoming project or to ask me questions before tackling a new home improvement project, follow my link titled "Consultation".
As an Amazon Associate, I earn from qualifying purchases.
How To Maintain The Sun Home Cold Plunge™ - Portable Ice Bath With Chiller
This video shows how to maintain the Sun Home Cold Plunge™ - Portable Ice Bath With Chiller. It goes over how to switch out the external filter without draining the tub. It goes over how to drain the tub with a submersible pump. It shows how to clean the tub after draining the water. It also shows how to access and clean the metal filter inside the filter unit.
Links
Filter Pump:
amzn.to/4bglKk3
Quick Connect for Hose:
amzn.to/47WX8dh
Garden Hose:
amzn.to/4blpCQC
Container:
amzn.to/480ySXw
Links
Filter Pump:
amzn.to/4bglKk3
Quick Connect for Hose:
amzn.to/47WX8dh
Garden Hose:
amzn.to/4blpCQC
Container:
amzn.to/480ySXw
Переглядів: 870
Відео
How To Assemble the Sun Home Luminar™ Outdoor 5-Person Full-Spectrum Infrared Sauna
Переглядів 5 тис.10 місяців тому
This video covers the assembly of the Sun Home Luminar™ Outdoor 5-Person Full-Spectrum Infrared Sauna from start to finish with tips for a smooth assembly Use Promo Code: NOAH200 to receive an extra $200 off at checkout Estimated Assembly Time: 3-4 Hours Items needed: One helper Drill or Impact Driver Long Phillips head drill bit Clear caulking Caulking Gun Lifting Straps Ladder sunhomesaunas.c...
Mastering the Art of Outdoor Living: Low Profile Shed Pad and Cedar Shed Assembly
Переглядів 167Рік тому
Mastering the Art of Outdoor Living: Low Profile Shed Pad and Cedar Shed Assembly
How to Replace Old Loose Outlets (The Easy Way)
Переглядів 218Рік тому
How to Replace Old Loose Outlets (The Easy Way)
I Bought a House...I Didn't Realize It Would Need THIS Much Work | Complete Remodel of My First Home
Переглядів 327Рік тому
I Bought a House...I Didn't Realize It Would Need THIS Much Work | Complete Remodel of My First Home
How to Make a PEX to Copper Stub-Out (Soldering Tutorial)
Переглядів 900Рік тому
How to Make a PEX to Copper Stub-Out (Soldering Tutorial)
How to Build a Shou Sugi Ban (Yaki Sugi) Fireplace with TouchStone Insert
Переглядів 7 тис.Рік тому
How to Build a Shou Sugi Ban (Yaki Sugi) Fireplace with TouchStone Insert
How to turn a Tub/Shower Valve into a Shower Valve | Part 3/3 - Soldering (Sweating) Brass to Brass
Переглядів 2,2 тис.2 роки тому
How to turn a Tub/Shower Valve into a Shower Valve | Part 3/3 - Soldering (Sweating) Brass to Brass
How to turn a Tub/Shower Valve into a Shower Valve | Part 2/3 - Attaching Copper Stub to Valve
Переглядів 2,6 тис.2 роки тому
How to turn a Tub/Shower Valve into a Shower Valve | Part 2/3 - Attaching Copper Stub to Valve
How to turn a Tub/Shower Valve into a Shower Valve | Part 1/3 - Adding the Copper Cap
Переглядів 9 тис.2 роки тому
How to turn a Tub/Shower Valve into a Shower Valve | Part 1/3 - Adding the Copper Cap
How to Calculate the Correct Depth for a Shower Valve so it Finishes Flush with the Finished Wall
Переглядів 148 тис.2 роки тому
How to Calculate the Correct Depth for a Shower Valve so it Finishes Flush with the Finished Wall
How To Change CC/IPS Threaded Moen Shower Valve to PEX Connection (No Soldering Required)
Переглядів 6 тис.2 роки тому
How To Change CC/IPS Threaded Moen Shower Valve to PEX Connection (No Soldering Required)
How long to asseble?
About 5-6 hours roughly
Very valuable information and clear explanation. Thank you sir
Glad you liked it!
Im glad to see the mistake. 😊
Nobody is perfect
Where can get the Dry box?
Home depot
This sucks.
Thanks for your constructive feedback Spike I will be sure to take it into consideration
For a new shower will full access to both sides of wet-wall: any problem with waiting until after the wall is completed? Then just locate center & drill through tile, thinset, etc. ???
Would never recommend doing it that way. Would be nearly impossible and you'd likely have to rip out tile
@@Cottonwoodconstruction What would make it impossible? I've got the diamond hole cutter. It seems this way would make it MUCH easer to install. (that could just be my inexperience thinking)
Liked the video - saving for reference; Now what is the suggested depth for the shower head?
It's not too important. You can flush a 2x4 up to the back of your stud cavity
Very helpful. Thank you.
Glad it was helpful!
Do guys install in LA area ?
I do not. But you could probably find a handyman to do it for you
What program do you use? Is it reasonably priced and easy to use?
It is google sketchup. You can get a month free and it is relatively easy to use
I must agree with others on here....your video is a must watch for DIYers. Thanks a bunch!
So happy to hear that!
What program are you using for the 2d model?
The 2D was just microsoft word
Wtf???
Fr
And then what? Are you venting it 90deg up through that hole and then another 90degree out the back?
In my case it goes straight up and 90's outside because it's below grade. Try to always find the shortest length of ducting possible with as few turns to the outside
@@Cottonwoodconstruction yep of course. Is there a product that recesses the vent hookup like this dryer box but exits straight out the back in a traditional way?
What if i don't have the mud box?
Hope and pray😂 Standard valve just set a 2x6 flush with the back of the studs and mount it to that!
Nice! What brand paint and primer do you recommend for built media wall
Kilz is a good primer. I typically use behr if buying at home depot
How long did it take you!
About 3-4 Hours!
How much would you charge for this. Just wondering. I’m in England and have a very dark room that would benefit an extra window
About $2500 usd. Would be more expensive if your brick is structural tho
@@Cottonwoodconstruction oh wow. Sorry that’s way more than I thought. I was thinking under £1000 including the window. Guess the wall will remain!
Thanks man!! Now I know what to pickup at store.
Awesome! Happy to help
Before I install my outlet I carefully measure and bend my wire into the gang box then I just pull the wire to connect to outlet.
Talk dirty to me
that plastic guard is tilted
Maybe thats why my house fell down
@@Cottonwoodconstruction I would place blame on the big bad wolf who huffed and puffed.
You know you can remove those pieces of tile to relocate your outlet as well. Or mount the hood first. Trace it, and then you know where to put backsplash and leave allowance for mechanical, electrical and mounting spaces
Great idea!
What's the best way to frame and get your measurements if the top of your fireplace is sloped in and is smaller than the bottom?
I'm a little confused on what you mean
Rest of process
Check out my full length videos for the entire process👍
I would love to know how this can be done in a room with vaulted ceilings
I can make a 3D design if you give me measurements
Thank you! 🙂
Any time!
Mine doesn’t have the same spot for the small filter? I’m so confused
It should. I would recommend reaching out to the support team directly
Man, if you believe in God, then GOD BLESS you for helping people achieve and save lots of money! I asked someone to do this for me, and they asked $3000 for it! You made it simple!
Two thumbs up for that!
Not my husband doing the exact same thing AND THEN watching your video🤦🏻♀️🤣🤣
Oh no🫣
Simply make a template of the wall and that’s it
Simple
On behalf of all the morons in the world, I thank you for the clear and concise explanation of this subject!
I love how detailed you are. Thank you. Serious question, can u do mock model for my measurements? Paid of course.
Absolutely. Send me an email to service@heights-handyman.com
do these measurement work on a surround shower kit. Thanks
Yes, just account for the thickness of the wall panels instead of the backerboard and tile
Never would have thought to run the wires through the wall.
After cleaning the internal filter the housing is nonlonger water tight. If i hand tighten too much it strips. No enough it leaks.
You may have cross threaded it
What are the advantages of having a recessed mounted tv vs mounting to the studs you have colored green or blocking between those studs?
Its only depends on aesthetics. A recessed space for a tv looks great but if you plan on changing tv sizes then it might not work well I put a small niche behind the tv to hide wires
C’mon way too much bs measurements and not enough actual.
You're so right
How much did you charge to assemble the sauna in your previous video?
I didn't charge for that one but I'd charge anywhere from $800-1200 depending on circumstances
Really well done! I'm thinking about buying the 2-person version of this. Hopefully you're enjoying yours!
Definitely should!
all that explanation was necessary
I agree
I hate to tell yu bud but your fireplace chimney is suposed 2 be bricks, ur gunna burn ur house down bud
I hate to tell you buddy but it's not 1910 anymore. Chimneys vent with metal ducting and electric fireplaces don't need venting
@@Cottonwoodconstruction well the metal ducting still gets hot there bud
Well they make insulated vent pipes there, keyboard ninja knowitall disgrees with everything pants
@@illbetherejk3212 hmmm idk about all that your gunna have to make a video to explain...
Can you share the SketchUp file used for this project?
Yes I can do that! It's not the best for editing but you can have the measurements and stuff
Who do I hire to do this work ?
Me
Terrible video
I got you my guy that’s bad for you. I wouldn’t be stepping on it.
Wasn't great
I love your hard wood lol
Lololol
60 seconds my nutz
No it actually took 60 seconds
I don’t believe 60 seconds.
Or just look at the valves diagram dimensions.
They don't give those. Hence the video
It has at least 10 years left on it.
Lol🤣