Відео

Glad you like it! Check out the discord server if you want to talk more baout this as well. Some delayer clips wrap around the sector cam pin, and this causes a further pullback of the nozzle. There are also tappet plates that are "shorter", which means they pull back further as well.

People do though. It's the standard for airsoftguns. It works well, just doesn't mix with silicone buckings. What do you think?

For the people

Funny you ask.... ;)

You're right. It's the most popular, and in theory AEG knowledge transfers between platforms, but there could be some quirks and work methods unique to V3 worth knowing. What do you suggest? Maybe let me know on discord discord.gg/55D8vuUz

Let me know how it goes! There's also discord for more contact: discord.gg/55D8vuUz

Thanks, that makes it all worth it. Check out my discord community if you're interested in more tech knowledge discord.com/invite/55D8vuUz

@@PerfectAirsoft oh, thanks man I'll hop right in

Check out my discord for more tech help :) discord.gg/55D8vuUz If you are sure that bucking length is an issue, you can use a bucking with shorter lips. This is unfortunately a trial and error thing, as it is not a common thing to highlight. Begadi has some buckings with shorter lips, IIRC, and maple leaf AEG buckings tend to be slightly longer than normal (common issue).

@@PerfectAirsoft link doesnt work anymore can we get a new one? amazing vid!

@@BaalRS discord.gg/Pj8adPVnuH

I'm glad you could use it! That makes it all worth it. Check out my discord server discord.gg/55D8vuUz Let me know there if you have other AEG troubleshooting or video ideas :)

Thanks for your comment. You're right that a conical nozzle has an easier time entering / going over the BB stack, i highlight this in the video. My experience is that, barring midcap syndrome, flat nozzles seal better and feed better. Surprisingly, sealing on the front of the bucking lips work very well and has a consistent airseal on the whole surface area. A conicai nozzle will, in theory, suffer easier blowby the moment it's not centered. A conical needs to be longer by definition. If you take a flat nozzle that is sealing, and shave it down to a conical shape, it will no longer seal. Sealing at the front of the bucking lips is the shortest movement to sealing, and any other method requires a longer nozzle. Looking at the begadi bucking drawings, they seem to have narrowed the inside of the bucking lips. This is a no-go, as it can cause jams, and additionally, lips are soft and can expand outwards, so ultimately the sideways airseal is decided by the lips being squeezed between nozzle and chamber wall.

Thanks man, glad you like it. @paragonarmory did a video on that that i think is just fine, so that's worth a look (his video is what made me make these two in depth nozzle videos). But i'll see if there's something i can formulate on this subject. Thanks!

Thanks!

Thanks for commenting. Yeah you're right, it's not touched on per say. But that's because that it's the last link in the shimming steps. The bevel is defined by the pinion mesh, and the spur is defined by the sector which is defined by the piston / tappet. So the intention is simply to hope that the spur and bevel matches OK, and if they don't, use different parts. There has to be a compromise in the system, and it's best to do it there.

Bevel to pinion is the right way to do it. It is the most important point for transmitting rotation in your gearbox and it is the one that will cause the most problems

@@ObitoLeTueur Thanks for your input. If you watch the video fully, you can see how it is explained. Feel free to hit me up on discord if you're interested in this.

There's room for everyone. I take bevel last, but there's no problem in doing bevel first really. The important point is that bevel-pinion and spur-sector are shimmed as two seperate groups first, and then combined in the event with compromises. Thanks for the compliment. It's a long video, not everyone's cup of tea, but i've wanted to do a definitive series on AEG shimming for a while.

There is some truths there 😂

Glad you like it!

THanks!

That's a good idea! Stay tuned and it could happen. Could you explain it more?

Im subscribed on your channel. I like to see more videos like that , about the video im talking about its to know how the nozzle move the bb in to the chamber and sincronice perfectly with the move of the piston to see when its the perfect timing. Sorry my english

@@snakeomg-ko9gy Hey your english is great, i'm not a native english speaker either :) That's an interesting idea, i'll see what i can do.

Sure, if you check out this video it shows the midcap syndrome: ua-cam.com/video/POvGYW2aJg8/v-deo.html

@@PerfectAirsoft Thank you!