Відео

@@bulotier thank you so much!

Thank you so much for your kind comment. The tires with wheels I purchased from Amain Hobbies.com.

@@fastrack59 the link won’t open. Is there a name and size you could possibly provide? Thank you

Thanks so much man. If you’re gonna use the Delta Plastik body for speed runs then this will be perfect. Because the lexan plastic they used is 2mm thick. Specially designed for speed runs.

Thanks for your reply. Right now I run a reinforced GT40 body from HPI which works well up to my latest speeds around 125 km/h . I fancy those late 60s cars and as the 917 has a lower and smaller overall profile it will go even faster than the GT40. I was desperately surfing the net to find anyone who married a tt-02 with this body, worried about where to place the front body posts and the 917s front height in the posts area. Your Fenix looks better/more correct indeed. For my purpose it would be too wide, although I run foam tires just like you, 40mm rear, 30mm front.

AliExpress.com

I have 3 mags and so far one leaks. But as a quick fix, I tighten the two CO2 cartridges simultaneously. And it’s good to go. Of course applying silicone oil first at the tip of each CO2 cartridge. A UA-camr suggested to apply Vaseline on the tip of the cartridge. Which according to him fixes the leaking problem. Haven’t tried it yet though.

Nah we use them for fun and back yard plinking to literally “shoot the shit” because the price of ammo is so high and this is a cheap, fun alternative. If you’re legitimately training with this, you’re doing it wrong.

@@hazmatt3250 Exactly why I got back into pellet and BB guns.👍

Go to AliExpress.com. Search airsoft ar15 accessories.

@@fastrack59 thank you very much!

On AliExpress.com. On search bar type in airsoft ar15 flash hider. Size 14mm counterclockwise (ccw).

@@fastrack59 Thanks Dennis... I ordered a flash hider and a couple of other things. Yours looks badass !!

Yes just go to AliExpress.com. Punch in airsoft extension barrel. All other accessories will appear simultaneously. I have no particular vendor. I choose whoever has the lowest price. Just make sure the front triangle sight is made of steel.

Did you ever find out more details on the item?

The mods that he's recorded videos for ain't going to get you to 872 it's a MAG modification that got him there and that video is not posted yet bro

For the Bushmaster, the carry handle came from an old broken down CO2 AR15. The front sight I got separately from AliExpress.

AliExpress.com

OK Dennis please can you give a more specific update on the barrel and iron sight…Ali express ??? What’s it called and from what supplier? Thanks

Looks really stupid with a tele sight or red dot.

It’s a barrel extension for an airsoft gun. You can purchase this from AliExpress. Thread size 14mm counter clockwise (ccw). Available in different lengths. The triangle sight as well from AliExpress.

@@fastrack59 what about the rear sight can I find that in Aliexpress too? :)

@@aarondubon9 yes

@@aarondubon9 its gonna take like 2 months to arrive from china xD You could check your local airsoft shops first.

@@RWMAirgunsmithing yeah that’s what I was thinking I ended looking at evike for it

For the DPMS you simply remove ( unscrew clockwise) the shorty mock suppressor then screw in the extension airsoft barrel of your choice. I got mine from AliExpress. Size 14mm counter clockwise (ccw).

@@fastrack59 can you link the item?

@@FINN-mg1uo AliExpress.com

He hasn’t replied huh?:( I was wondering the same thing…

@@aarondubon9 Yeah, I've been trying to find the answer all over the internet. Nothin.

I've seen that somewhere on an airsoft or another BB rifle.

It requires a bit of work. Specially on the grinding part of the process. Difficult to explain in words. I’ve been meaning to do a video on it but my busy schedule is very restricting. But I learned how to mod the buffer tube watching a UA-camr’s very brief instructional. Now I can’t even find that video. As an overview, you’ll need to remove the original buttstock. Then on the buffer tube there are 2 pins, front and rear. Remove those pins carefully. Pull out the tube. There are two rail bars on the tube where the stock mounts. Grind those down till you achieve a perfect circle. Flattening it until the tube is perfectly smooth. You’ll also have to cut the protruding portion of the plastic shroud at the rear end of the receiver. When all these are done, simply slide a regular airsoft ar15 buttstock. Some people say the buffer tube of the dpms is not milspec. So using one may not fit.

I saw it on a Crossman pump called the M4 ... looks like an AR

Done, have airsoft barrel extensions, ordered a triangle sight and carry handle. already snug fit the bushmaster bushing into my airsoft barrel. Grinded down my dpms buffer tube to accept a mil spec stock and swapped everything back to its original . lol these bb guns are awesome xD

@@RWMAirgunsmithing which exact barrel extensions and sights did you buy. (I really want to get this)

@@santan_v_manman247 I picked up two 4inch long 1.9mm outer diameter barrel extensions at an airsoft shop near my work. Used those to cover the protruding inner barrel on the MPW ( one 4 inch is enough to shroud the barrel, 1.9mm diameter was to fit in the triangle sight) The triangle sight and carry handle I ended buying on aliexpress. Couldn't find any for some reason in north America.

Cant remember the brands for the life of me I bought what was there, airsoft shops are a goldmine for accessories. Just make sure the threads are ccw and your barrel extension fits inside a triangle sight's loops.

Airsoft barrel extension from AliExpress. Size 14mm counter clockwise (ccw) thread. As for inaccuracy issues, what type bb’s do you use? I use Crosman copper coated steel bb’s. Accurate at 30 feet. Make sure bb’s are perfectly round. No flat spots. And avoid re-using fired bb’s. Thank

@@fastrack59 well I had an issue, a been got stuck in the barrel it’s self, I took the whole gun apart. Thinking that I’d be able to punch the bb out I saw that it got stuck with I can only imagine Little Rocks I seemed like the bb was really wedge, I ended up getting a metal rod putting it in from the front of the barrel and forcing the bb out back, I’m not sure if I’m the process of all that the barrel got scratched but i assumed it was fine, but all I know now is that it shoots like a gun from borderlands not consistent. I think I’ll take it apart agai to check for damage.

The fake "mini" silencer on the DPMS and R1 Crosman's is just screwed onto the 14mm CC threaded barrel end. Use a rubber jar top opener pad to grip the fake silencer and turn it clockwise (looking at it from the muzzle end). The DPMS SBR is the exact same front end as the R1 - same threaded barrel, same Pict rail shroud etc. The ONLY difference is the butt stock assembly and the R1's Buffer tube assembly will fit onto the DPMS and Crosman will sell that R1 (or Bushmaster for that matter) buffer tube assembly to you as a replacement part. But, why bother, just buy another Crosman, an R1 this time if you don't like DPMS butt stock. Crosman sells a factory refurbished R1 for $129 shipped. Just as a footnote, DPMS Panther Arms does NOT make any model that looks anything like the Crosman DPMS SBR .... I have a real DPMS Panther Arms SBR I shoot in Run n Gun Competition matches. Numerous Airsoft dealers online sell 14mm CC Faux (fake) Silencers, just make sure you get one with the foam tube inside so it actually does "quiet" the shots. Check out Evike.com.

The buffer tube is standard size. But you’ll have to grind down the buttstock rail bars underneath to make it round to fit a normal AR buttstock. Also, you’ll have to cut away the top shroud and you’re good to go.

Check out this guy's video, he does a freaking amazing job on his "tube" lol.. way better than me xD. ua-cam.com/video/PwrsM2z3AEY/v-deo.html

@@fastrack59 Sweet accessories! Where did you get the barrel extentions?

Hi. No. What you see is simply an airsoft outer barrel extension. I got it from AliExpress. It comes in a pack of 4 different lengths.

@Khalid Abdullah go to Evike.com. In search bar type in AR15 flash hider. 14mm counter clockwise (ccw).

There are 2 large screws at the front end of the forward hand grip. One on either side. Those screws hold the picatinny rail and the mock suppressor. Remove the 2 screws then carefully slide the mock suppressor forward to remove it. Return the screws to re- secure the picatinny rail. There will be a threaded tube about 1/4 inch sticking out. This is size 14mm with counter clockwise thread (negative). Simply screw on the outer extension barrel. The gun’s bb barrel will also be exposed. About 5 inches. This will not be secure and is loose. What I did was wrap duct tape around the bb tube at the exact spot where the threaded tube protrudes. Winding the tape until it fits snugly so the bb tube doesn’t move out each time you fire the gun.

cool! thats realy helpful..many thanks!

Yes it's 1/2 x 20. It fits perfectly on the T1.

Awesome. Thank you