Відео

This head studs fit to FA24

Axle stands u worried about fire extinguisher axle stands would have been a better safety thing

Disconnect the battery negative terminal and wait 30 seconds. This will reset the code. Reconnect the negative battery lead and it will clear the limp mode condition.

8.5 quarts for that thing???😂😂😂 Not even some f150s take so much oil. Also, you should've used jack stands to prevent getting squished.

thx😀

I have replace mine and now the idle has gone from 1-2k rpm bouncing to 200rpm. I don't know how its even possible to idle that low XD

Which model did you buy?

@justastreetcar I need help really bad 😔

Do you need a press 😮‍💨

Thanks dude!!

Question, would this front bumper fit a 2008 CTS 3.6? The one with the bigger grille.. kinda like this bumper.. everything you removed to take off the bumper is the same process as mine and also the headlights are same model

Helpful, but get a tripod brother!

So useful... No videos how to properly remove a belt on an SRT6...

How much did they charge you???

Where did you run power from ?

What the f*** did you do I didn't see nothing

A lil trick i use when lifting lid slid a old shammy underneath b4

why take the foam off iff the nuts are in the back?

oil on the rubbers good combi my god

Wrong oil wrong filter

I replaced mine and it keeps throwing the same code? Any thoughts? 2004 2.5 ts

2015cts still goes up down but no extension but my wheels not loose like people say there's is

If you want to live much longer you might want to invest in some jack stands. NEVER trust a jack alone!

My wife's 2014 CTS Premium coupe has steering wheel issues. The car drives straight but the steering wheel itself keeps coming out of alignment. We can go back to the dealership and have them fix the steering wheel and make it straight, but within 100 miles the steering wheel will come off center again. Now the telescoping part of the steering wheel is fine, but if you give it a good nudge, the wheel will go up & down less than a quarter of an inch. Up and down as in the top of the steering wheel moving towards the windshield and the lower part of the steering wheel moving towards your lap. Do you tighten it the same way?

Lol i put a funnel in it no problem. Leave the engine cover on

My car is in limp mode any ideas

Thanks for the help, went from 16g evo to stock and back to a 16gxt... needed a hand

Good job and your right the cup holders are about as cheap as you can get.thankd

Can use your help

Cheers for this

Sadly,no video of taking headliner out of the car 😢

Nice color man , did you get it done ?

Thank u buddy we was in town when the car did it couldn't have been easier

Can't you just flip the throttlebody?

Hi there. Can a 2.1 stroker kit be installed in EJ206?

Came here to see how you reached the plugs 🙃🙃

“Prime the oil system”? Unless this engine has an electric oil pump turning the key to on, without actually starting the engine, will do absolutely nothing as far as priming the oil system.

You have any issues with it being so close to the pulley since?

Thank you my '09 CTS Has same exact issue

Did it have an odd idle going up and down on cold starts before you changed it? What brand did you go with for the new one?

Didn't show anything with spark plugs. Nice.

I’m having the same issue.. exactly same. No mechanics want to fix my car so I’m gonna have to do it myself. What’s the model number of your scan tool

Why did it take you almost 10 minutes to do something so simple

Hey Brother thanks for the video all 4 screws were loose and ready to fall out great video! 👍

Do you know if the Autel MD802 will clear or relearn the tire sensors on my 2005 cross fire?

do you still have the OEM restrictor pill inside the line coming off the nipple on your turbo?

My nigga u took the whole car apart

Thanks for your video, I'll give it a shot soon. In the meantime, I just tilted the hidden coin door forward slightly as I push the door closed, when it springs back forward, the bottom of the hidden coin door blocks the ashtray from moving forward. Doesn't look too odd if you don't stare at it, lol. But looking for a real fix.

Dude I just did mine 08 CTS after removing the cover and crawling under there it looks a bit confusing takes a while to figure out the mechanics of what's going on 😲 I had to move the limit switch towards the floorboard to reverse the direction of the drive 🙄 but with your info provided really helped! Thx ✌

Thank you for your time 👍