Thanks David, I been trying to find an answer online how to get this off and figure squeeze was not enough. I will try this when I get home. thanks man
Does this mean that if it gets below or above a certain temperature it would ether kick the heat or the air on or vice versa? Besides what does emergency heat mean also????
Why this isn't on by default is beyond me. All thermostats should default to switching between heating and cooling automatically. And, no, this does not appear in the instruction manual. For others who have read this - you need to go into each mode (430/431), heating and cooling, and set the desired temperature. But such that each is not overlapping each other. That is, say you want 75. You want it to heat to 74 and cool to 76. This way it's not bouncing back and forth every 5 minutes and causing the compressor problems. Or select auto 75 and you're done because IIRC the mode has a 1-2 degree set point spread so it won't fight itself endlessly. Again, this is super convoluted and not explained anywhere. Note that the place will fluctuate a couple of degrees in auto mode and this is normal. The problem is when you set the points past each other - like cool 74 and heat 76 at the same time - then it constantly runs and fights itself back and forth.
How do you take auto mode off and use it manually for temp selection. I care nothing about the different temps for different times of day etc.....I want a non programmable thermostat operation
@@rabie4x4 no success. I took it off the wall and put a manual switch mode and temp selection Honeywell thermostat up for heat and cooling. Been happy ever since.
We messed up something in our thermostat and yhis helped so much. thanks
What if my buttons stopped workin on a certain side
Thank you sooo much 🎉❤️🔥❤️🔥
This worked for me
My fan is on auto but it runs the whole day…how do i fix that 1
What does the ISU mean/ do?
How do you get the permanent cool setting on?
How can I start from beginning?
Thanks David, I been trying to find an answer online how to get this off and figure squeeze was not enough. I will try this when I get home. thanks man
SUPER HELPULL!!!!!!! THANK YOU
Please explain the reason to program to Auto when there's Fan Auto. I have the same thermostat, and I am trying to figure out how it works.
Does this mean that if it gets below or above a certain temperature it would ether kick the heat or the air on or vice versa? Besides what does emergency heat mean also????
Thanks for the help
Hello how you do it for air
I set it tk heat but cold air still keep coming out .please help !
Thank you so much you were one that was so helpful and correct now it’s on the right mode now ❤❤❤ Thank you again
What if It doesn't only say "auto" and it says "Permanent Hold" right above where it says "auto" at the SAME TIME?
My thermostat is locked and I can't unlock it. Could you please help
You need to use the PIN number which is 1234 and that’s not joke and it will unlock
Hola como hago para que el ventilador quede encendido siempre el tiene un botón de automático y encendido pero no enciende que crees que es .Gracias
How can you turn it off?
This was good information. But I still need to adjust my thermostat to 65 degrees and it won't go past 37 degrees
Can't change the temperature from 86 to69
How do you do this if you don’t have buttons. They’re just on the screen
THANK U SOOOOO MUCH MY LIGHT BILL WAS SKY HIGH
LIFESAVER THANK YOU
Does this thermostat do auto switch for auxiliary heat when your heat pump can’t keep up during cold conditions?
Whats the Auto for?
It turns the heat when the temperature reaches a certain point and turns the AC when the temperature reaches a certain point.
How do I turn on emergency heat?
How do i get the heat to come back on after changing batteries
I've been. Waiting for an answer on that forever
Thank you
THANK YOU. These things are not intuitive at all
Put how do you get the the temp/perm hold to come back up?
Why this isn't on by default is beyond me. All thermostats should default to switching between heating and cooling automatically. And, no, this does not appear in the instruction manual. For others who have read this - you need to go into each mode (430/431), heating and cooling, and set the desired temperature. But such that each is not overlapping each other. That is, say you want 75. You want it to heat to 74 and cool to 76. This way it's not bouncing back and forth every 5 minutes and causing the compressor problems. Or select auto 75 and you're done because IIRC the mode has a 1-2 degree set point spread so it won't fight itself endlessly. Again, this is super convoluted and not explained anywhere. Note that the place will fluctuate a couple of degrees in auto mode and this is normal. The problem is when you set the points past each other - like cool 74 and heat 76 at the same time - then it constantly runs and fights itself back and forth.
How u turn it off?
How the fuck I turn it on
Or turn the effing thing off!
Thank you!
How do you take auto mode off and use it manually for temp selection. I care nothing about the different temps for different times of day etc.....I want a non programmable thermostat operation
go to ISU, go to 430(cool) set to 68 or 70 . 431(heat) set to 70 or 74.i set mine 70/70. auto mode will do both.
Hi. Any success? I want it to Stay on the setting l put it on. Can't figure it out
@@rabie4x4 no success. I took it off the wall and put a manual switch mode and temp selection Honeywell thermostat up for heat and cooling. Been happy ever since.
Why don’t you just change to heat or cool mode?
to use it manually you just put it on Cool or Heat and it keeps running till you turn it off
😢😊
WOW! Thank you so much for doing this vid....it helped me tremendously!
I used your settings to guide me back to my screw up. You rock man.
Ours is stuck on update stopped. Tried so many things good luck
I currently have the same problem have u fixed it