Відео

@@SouthernRCGarage Thanks buddy much appreciated 😊 🍻

@@stoneroses8818 not yet but I may do in the future 😊

Thanks buddy 😊 🍻

Oh no 😯 Fingers crossed 🤞🏻 This set turns up soon for you 🙂 And hopefully the second set finds there way to.

Thanks buddy you have mentioned me a few times and you have a good channel So credit where credit is due .🙂 And that video wouldn't of existed without the link to those driveshafts so yeah no worries plus you and your channel are an easy watch so if I can help your channel grow in anyway I'm only happy to. Plus you were the first UA-camr that I know of to mention my channel with the 168 replica 😉 So thank you sir . 😊

I'm fairly sure I've seen them on AliExpress but I made my own ones you can get the sm connector kit on Amazon or eBay and AliExpress for around £15 with the crimping tool 😀

Totally agree 💯 But people do like to know how they perform and see 😊 I'd say the majority of these are trail rigs in all honesty. Check them out in the correct environment 👇🏻😁 ua-cam.com/video/tU42Uqt8I7g/v-deo.htmlsi=f-FEQpfw4As4BunI

Just subscribed to you too 😊

@@RCFIEND24 yeah it's not too bad when you get into it 😃

They do work well in most environments 😊

Thanks buddy 😁🍻

@@RCplamodel thanks buddy and your comments are always appreciated 😊🍻

Thanks buddy 😁

@@DoingRC thanks buddy always appreciated 😊🍻

@@suvsteve 🍻

@@Thehobbymanashleyfigurecollect thanks buddy that's appreciated 😊

@@Thehobbymanashleyfigurecollect I have another video with my silver one on a crawler course here 👇🏻😊 ua-cam.com/video/4mGB56U1yNU/v-deo.htmlsi=5IC-y9YBMieegv8c

@@Thehobbymanashleyfigurecollect just subscribed to your channel 😊

Yeah they are a bit overlooked. They share the chassis and drive train from the MN86 so motor is upfront under the bonnet/hood and built a little more on the chunky side with stand alone esc and receiver and are a great bit of kit for the money about 60 UK and that should be less than 100 bucks U,S Here's a link to my silver one on a crawler course 👇🏻 ua-cam.com/video/4mGB56U1yNU/v-deo.htmlsi=2zVMA1Rvm1PgtdtK I'm now only missing the black open top one to complete the set. And I'm feeling buying another top paint white maybe 🤔 Anyway here's a little preview video with upgraded wheel and metal side steps 👇🏻😊 ua-cam.com/users/shortsb_NfVlH-PT4?si=6F6GSFEf9G51fS-A

@ Great. The silver one with the upgrades looks good. Both are great looking Jeep bodies. 👍😎

@SouthernRCGarage thanks buddy worth considering for your collection? 😜

@@suvsteve 😁😁. Always, Although I have had my eye on a MN168 for a while.

Around walking pace 😊 I do have some trailing video of it that should help you judge it 😊

@@mikeg3244 Here's a link to the trail video 😊 👇🏻 ua-cam.com/video/Hv1gJLnxGlE/v-deo.htmlsi=dJVOAOJibAryVq1E

@@Noel-qm6yx not really the servos are the same maybe the axle but that's about it

@@cbsshenanigans862 thanks buddy 😁

@@SouthernRCGarage thanks buddy 😁

Cheers mate 🥂

@@ThePapsRc thanks buddy 😊

Great idea thanks for sharing 😃

@ no worries ✊

@@RCTeamAustria cheers buddy 🍻

Cheers buddy thank you for the nice comments 😊

@@dustinrossi9384 The fix isn't too bad. But Wpl really should of sorted this issue out by now especially as it's on both the C64-1 and C74-1 this is the fix 👇🏻 ua-cam.com/video/1bQWTzm_CiY/v-deo.htmlsi=DE_KL89vpwMYXuz1

​@@suvsteve My c44 km does this too. The whole front end is a mess

@@ferv888 Is that the Wpl metal axle,s ? I'll have to look at mine. Mine didn't seem to bad when I built it. But I'll dust it of and see how its doing new when I get back home at the weekend 🙂ua-cam.com/video/VMt6sfX_RuQ/v-deo.htmlsi=NEouBm6fe1UmTLqi

@@suvsteve yep it was the metal kit. Anyway the grub screws were ass... I cant take my car apart anymore, the hex has stripped and the screw is only halfway in so im cooked. It was bad before too

@ferv888 can you cut a slot with a dremal and use a small flat screwdriver to wind it out ? I now use slightly longer stainless steel grubs . They seem to bite better if you happen to be in Norfolk/Suffolk UK I'd be happy to have a look and see if I can't fix it for you.

Thank you I appreciate it 😊

😁🍻

@@suvsteve Cheers🍻

Thank you buddy 😁

Cheers buddy 😁🍻

Ah that's the esc or the electric speed controller. Although its a pretty good esc for the cost of the RC . It not an expensive one so as you get a lot of good RC for not a lot of money that's where they have saved money by providing a cheep but ok esc. Also the mic 🎤 on the phone is close to the car while filming so does tend to pick up that sound more than normal. It's probably not so bad in real life 😊

Thank you! Cheers! 😊

@@SB-1947 The postal service sucks 😞. Hopefully it comes through soon 🤞🏻 I think you will enjoy it 😁 And especially with a splash of colour can make these things look so real 😊 Have a good day 🙂

I'm thinking of maybe getting a 3rd and doing a custom Herby drifter 😅

@@derrickhays3627 🤣🤣 To be fair it could be any colour as I have a mild colour blindness more with shades of colours really but it's definitely not white.🤣🤣

Thanks buddy 😁

@@stevenjones19-m8i Thanks buddy I appreciate it and definitely helps make them look more realistic 😊

Probably 🤔 I'll recon I'll get another one to customise a maybe turn into a drift car 🚗🤔

@@z33tanner I found a fairly easy fix in this video 🙂👇🏻ua-cam.com/video/1bQWTzm_CiY/v-deo.htmlsi=o_BcVgIgBLm5YTIW

Good choice! It will be nice to see it when it's done 😊

@@Rccrawler90 cheers buddy 🍻

@ likewise 👍🏾 it’s beautiful

@@Rccrawler90 Just subscribed to your channel 😊

Ha ha cheers buddy 🍻

Awesome I'll see if I have some around 😁

Can you put a link to it?

Ahh that's good to know I should actually have a couple of spare ones if I can ever find them 😊 Cheers buddy 🍻

If you can stop the axle twisting or reduce it. It vastly improves it 😊

😅 I need to put the orange C74-1 back together I'm just procrastinating on doing a design on the side or it just being a flat orange 🍊🤔

@@WarlyEspiritu-e7e yes definitely. Although its reasonably capable once the driveshaft issue is fixed 😊 Look up my other videos of me fixing it and trailing with it . Basically turn the rear leaf springs around and add some spring helpers goes a very long way to fixing the issue and it not slipping anymore. Or as @AlphamenschRC commented "he changed the driveshaft to Metal (MN driveshaft fits ) press fit can be pulled of and glued back on... problem solved 😎" So there are a couple of options to fix the issue my practically free way with no real parts needed or @AlphamenschRC s way of upgrading.. But ether way it's a lot more capable once fixed 😊 It's certainly not a crawler but is quite a competent trail truck 🙂

@@allansoria3478 hi Allan no need to be sorry not all videos are for everyone and hopefully you had a good sleep. I'm a very small channel still learning. I welcome any polite suggestions for improving 🙂 And rude or offensive will be blocked and removed. But thankfully in general most people are respectful like yourself. Please feel free to suggest what I might improve and dislike it twice if you really don't like it. Thanks . Regards Steve. 🙂

@@TheMindsEyeRC thanks buddy I appreciate it 😊