Відео

No vent port for an exhaust setup? That’s unfortunate

Never understood why people complain of fan noise with these dryers. Your setup shouldn't be in your living space.

Great detailed review! Thank you. Just one thing... Its pronounced S press Oh (only mentioning it because I'm Italian. No offence meant lol)

the heated vat is realy a plus for me to buy this one next to my other S4U - although I have some questions about the heated vat. And I hope you can give me an insight. There are two 'heater' functions on the printer, the 'heater' and the 'pre-heater'. When you select the pre-heater function you get a warning that the resin level needs to be between the 'min' and 'max' level indicated in the vat - otherwise it is going to damage itself. The pre-heat function will warm up the resin for 24 hours - so my conclusion is that the resin level needs to be between these levels while printing... So, no large prints can be made. Or am I missing someting? The other function is the 'heater' which will warm the resin up to 25 degrees - but do you get here the same warning? In other words: does the resin level with this heater function as well between the min and max level of the resin tank? thanks in advance.

rtzh

Thank you for sharing this, look's like you had a great day out...😊😊

Nice, thanks. Surprised that Kidoodle3D wasn't there. It would be a great trade show for them.

I need the heat and mix so bad but my saturn 3 ultra still works so i’m gonna have to hold off on this

i am torn between this and ikier model for my fightstics.

I got the Elegoo Saturn 4 Ultra 12k for Christmas last year and I'm very happy with it and any pint fails have been because of me not the machine I love the heated vat on the 16K but I'm going to grab a brewers belt or the Elegoo for my current machine and as for the light in the new model I can just grab a little USB powered light and put that in P.S and the new machine has got a smaller build plate as well

Elegoo just knows how to do resin! Good improvements over last year's model. Great review!

Hi great video went through all aspects really does seems good and the message part with errors is good ,I work as laser operator technician on industrial 5kw fiber laser of steel 20mm thick x 3000x1500mm capacity ,your video has ready sealed the deal for me to get one of these for at home projects,good you being English too .will watch more of your content now as this was the first ,thanks

hola puedes grabar en metacrilato? plexiglas?

Nice prints. Nice time-lapse. Most importantly, heated VAT allows resin printing in cold sheds and garages. Awesome!

hello can you tell me the exact width of this product?

I have had a Kobra max for a while now is there an update for a BL Touch. I need help

What exactly did you plug the USB light into?

hi, its possible to install rear and lateral fans in K1 SE in order to print abs?, I can install custom panels and door easy but need to know if the printer comes with cables for the fans or at least theres place to plug them like the camera

Can the heat be adjusted on this model?

Hi. Do you still recommend the iCube 10W or is this a far better machine?

Comes with 4 squares of double sided tape to secure the light

Adding actually engraved test guidance is a good idea.

Great video , purchased the K1 Speedy just over a month ago, the Speedy & SE are the same price in the UK (£339),. Mine came with the new version 3 extruder, ceramic hot end & hardened steel nozzle (Unicorn, I think ?). Upgraded with the camera, which I think makes it almost a K1C, apart from the carbon filter & the smaller X/Y axis pulley gears that are fitted on the K1C. The C has these to improve the VFAs & ghosting of the early K1s?

Just commented on your z offset video; my stock extrusion was ~92mm with E steps set at 405. Ended up with it at 448 to get the full 100mm. My Max does have a 'semi-'direct drive mod with the extruder about an inch above the entrance to the hotend. I never checked E steps before the mod, so I don't know if that change had any effect.

I m sorry but you dont know to explain clearly what you are doing there.

Any idea whether this firmware (or the later versions now available) will allow seeing and adjusting E steps from the control pad? It's not at all convenient to get a usb cable from computer to printer for pronterface. Failing that, do you know the 'stock' E steps setting in the firmware? Mine seems to be under-extruding by about 3-4% (3mm over 100mm extrusion) using a gcode file found online, but I have no idea what number to start with to adjust it using the 'card' method to run the gcodes. Thanks!

Hello, I have a problem with version zombieV2, it is impossible to change the filament during printing to pause the printer.

Does this work on the anycubic kobra printer?

Creativity customer service will give you and STL file for a cover that fits their extruder, but you have to email them directly....

On my K1C, both screw holes on the right side of the extruder (the side with two screws) for attaching the extruder assembly into the print head do not align properly. The holes in the extruder are slightly higher than the holes in the print head mount. You must push very firmly on the top of the extruder before the screws will catch and thread in. This is not the case with the stock extruder - it just pivots into place and the screws thread without issues. Also, the K1C does not have the extra bit of Bowden tube between the extruder and the print head. There is a built in metal tube that serves that purpose.

Dark black? its just black

Very helpful, thanks so much!

When you did the self check when it went to input shaping did it make a really loud noise and start vibrating because mine did I was afraid I was going to mess something up

What sort of interface does the laser module have as you can get a 20watt module for £200 from the elegoo site.If it has pwm/ttl that would be an amazing upgrade for my cnc

A surprisingly compact machine!

Does it have double espresso function?

Ahhhhh, I printed the same AMS riser. I added little foam strips to the glass tabs to keep it from wanting to shake out or accidentally shattering.

No files found on the ****/3dpuk website; have they moved?

Do you consider this k1 se printer a reliable printer? I could get k1 SE for like 315 usd vs the bambu a1 for 375 (im from mexico, those are the current prices) i decided to go for the k1SE. I do like a lot more the idea of a core xy printer for even cheaper but im worried cuz this is would be my first printer and i've heard creality has a lot of quality control issues while bambulab is just easy printing. I do like tinkering and learning from fixing things since im in the custom built pcs hobby i just dont want something that makes me not wanting to use it cuz everytime there is something going wrong, i do consider i learn really fast and i have a decent amount of hardware and electronics knowledge cuz the pc hobby i mentioned before but i dont know anything about 3d printing ant this is my journey start. What are your thoughts on these, would you consider i should be fine with the k1 SE?

I replaced my stock extruder on my one-year-old K1 Max. I adjusted it as I printed a 15-minute benchy at full speed with regular PLA and it was better than the first one. No stringing and perfect layers!

I can't find nozzles for kobra max, just for kobra 2 max... Are they the same ?? Pls help

i have 2 of these, warm up lovely, but where does the moisture go ?

Looks neat and does the job!

I'm here in 2024 with a kobra 2 neo that needs to be lubricated and I just learned how from this video. 😊 What about greasing the linear rails?

Only video I have found showing how to change the filament, thank you!!

I am sure you are aware but just in case. Plugging both light strips in exceeds the recommended draw on the light bar connector. That is according to Bigtreetech. No idea what this might mean lol.

Good video, but did you have to pay import tax, did it come from the US to the UK?

I got the problem but with the outside ones

Dont Buy this shit machine, gears broke after less then a month printing among other problems NOt worth the high price, quality is really Chinese. If you buy just order steel gears or better extruder right away and count that into the price of buying a K1 Max in eu thats about $750-1000 + $100 for upgrading. BETTER they just ship the K1 without extruder and let one buy a 3 party extruder right away to cut the price of the machine!

I have troubles with printing tpu with the k1c. 90a is the tpu i wnat to print but its to soft i guess. Any advise?