Відео

Yes and it's plug and play still blade and cutting blade just use babyliss cam follower

@@youngdade8800 I used the bill pro trimmer cam follower switched the cutting blade to a psycho and used the gold fx still blade they hit nice and sharp

It's in the description

@@Dave2662 the one I did with the gold fx hits one hitters these get the job done they produce sharp lines you just got spend a little extra time. You can have a heavy hand and it still won't cut

@@budgetclipperreviews3209 👍👍 just put a chameleon FX blade. Both the cutting and the non moving blade. Its set flush 0 gap. Just need to try them now

Jucai pro trimmer Kemei 2293 check out edo unboxing for the 3rd I can't think of any other ones

@budgetclipperreviews3209 thanks for the replay, I'm actually taking with edo ,he said the only trimmer that works with no mod is a lence pro but can't find that anywhere, he didn't say anything about the jucai , he did say that the kemei 2293 needs a mod, I haven't found any video showing the 2293 bablyliss blade swap without a mod???

Vgr 906

@@chunt241 unless you like a super loud ass trimmer I don't suggest changing to a Wahl blade. I'm not sure about the rpms though. Don't have high expectations for this trimmer keep it stock

Factory blades are decent

@budgetclipperreviews3209 thank you Bro

It just crunches produce the same fade as a fusion blade not worth the price

@@cheperdz5850 Getting the blade set right on this trimmer is very difficult. The new VGR replacement blades plastics parts can't be undone. If you separate the plastic parts it can't be put back together. I used the bill pro trimmer plastic parts to install the gold fx still blade and the tpob cutting blade. Hope I answered your question I didn't understand it fully

Thank you for the reply. It really helped me a lot. I have the same trimmer, but it came with a completely broken blade. My question is whether I should buy an identical blade or adapt a different one, like the one I saw in the video you shared. This has helped me make up my mind Thanks 🙏

@@cheperdz5850 what I suggest will cost you extra dollars but I believe it's worth it because with the right blade it's the perfect trimmer. If you can't get the blade right it's complete trash. Here's my suggestion go on Alibaba and see if you can by the plastic parts to the bill pro trimmer. If you can purchase a tpob phycho blade and use it as the cutting blade. It zeroed gapped both of my sets and they hit good.

I will! That sounds fantastic. Thank you for sharing your ideas

@@cheperdz5850 I bought a replacement blade but it didn't zero gap. These trimmers are a hit or miss if you can't get the blade right it's absolutely trash if you can it's the best trimmer on the market

@@M_Bison its a preference thing. The stock blade comes perfectly 0 gapped on the vgr 992 the 640 and 906 both have the same top rpm as the 992. I like it better but I wouldn't say it's better.

​@budgetclipperreviews3209 Preciate it bro! Is the 992 the same size as the 640 and the 996?

@@M_Bison yep

@@513lukas it's supposed to be 9000rpm buts its really like 8378 which is better than a lot of mainstream trimmers. Plenty of power for sharp lineups. If you can manage to get the blade right.

@@Deski502 stock cutting blade. They was busting major heads for top and bottom so I just got the top blade for 47$

@@mariafil7249 I haven't had that problem but I haven't used it extensively. I hardly ever use it on the highest speed. I imagine using on the highest speed will cause it to overheat overtime

@@budgetclipperreviews3209 i think there is a more complete version in kemei km 2796.Please check it out

did you use a 30 or 50 percent coupon?was it in september?

@@junebug8808jec that's a absolute steal

@mariafil7249 no coupon at all it was just straight up that one price

@@junebug8808jec so good,hard to believe.Did you buy the kemei km 8536 duo?

@@junebug8808jec was it the kemei km 8536 duo?

@@Black-ds2ki I never really cared for the instinct type clippers besides it's double the price of this and it's loud as fuck. I don't think it's a clipper around that feel as good as this clipper in your hand besides the play. This clipper gets the job done. The trimmers are just as good when you change the cutter blade. The VGR 640 and Kemei 1670 is the best clippers I bought from ali express

Appreciate that, glad you’re getting results!

@@Sir-Kay Nah homie I was just seeing something I rock it with the faper blade and o.g cutting blade. The original blade is good S/C tight guards and tpob guards fit the original blade.

@@budgetclipperreviews3209 I'm not talking about guards, I'm talking about the blades that does the cutting. Why did you take the original blade off, how did it cut and what do you have on it now? complete babyliss top & bottom blade or some other combo? See, these are the reasons why people make videos, so that other people can ask questions & save themselves time and money.

@@Sir-Kay The original blade cuts good. I was just seeing if that blade fits because it didn't fit on the 640. I used that blade for UA-cam shorts only. I rock wit da original stock cutting blade with a faper blade. It enables me to still use babyliss premium guards. It's no need to change the blade. I was just trying different things out. I bought that blade in the video for my lence pro armour

@@budgetclipperreviews3209 " I rock wit da original stock cutting blade with a faper blade" you mean it's own stock faper blade or a 3rd party one? if yes, which one?

@@Sir-Kay Stylecraft faper blade and the original stock cutting blade. Babyliss premium guards are my go to. The stock blade rattles with the premiums. That's why I use the Stylecraft blade

@@xthabarber all you have to do is replace the cam followers. The m.i.m blade comes with a cam follower. The mim still blade wont zero gap on the vgrs but for some reason it'll zero gap on the kemei 1670. If you don't have the vgrs buy the kemei's.

@budgetclipperreviews3209 Appreciate it!

@@513lukas these mothafuckas fire. The motor is exactly the same but the kemei feels better in the hand and it comes with a charging stand. Super highly recommended

Which Kemei model are these bro?

@@HowardWhite-j6p 1670

I haven't had that happen yet, thing is though even the expensive brands fail within a year a lot of times. These are good though top quality. I loved Wahl heroes but they didn't last no longer than 6-8 months before I needed a new pair. Corded was really the most reliable option out there but people are so fixated on convience. Master and seniors stood the test of time for years. Andis corded trimmer are more reliable than Wahl trimmers. If you want something that's going to last and perform. Andis master and the t outliner. All I have to do is either sharpen or replace the blades.

@@budgetclipperreviews3209 I have the combo trimmer with it too and I’m trying to figure out what trimmer blade is replaceable with it :(

@@Moudmenn ali express.

ua-cam.com/video/_SUKg5YUbtw/v-deo.htmlsi=3s2GMqv-83uYCaKP

​@@KyleParker-k1e if you're talking about the trimmer blade it's not going to effectively zero gap, but it's ok I talked to the guy from elite clipper mods and he'll be doing a mod for this trimmer

@@budgetclipperreviews3209 cool thanks for the info

@@desmondmitchell5602 for 49 you can't beat it

It gets the job done

​@@budgetclipperreviews3209It's definitely a hitter bro. I followed one of your videos and shaved the cam follower down just a tidbit...then I put that babyliss blade on there. It's my #2 behind that TPOB Troll with the gold psycho blade. Preciate the advice my guy 💪🏿.

Gold fx still blade tpob trimmer cutting blade original cam follower. Automatically zero gaps

@@budgetclipperreviews3209where do you get those cam followers? I bought the combo and i wanna do the mods as well…

@@user-bu3yi8jb2y For the clipper use the cam follower that comes with the m.i.m blade and put it on the VGR. The Mim still blade will fit but you won't be able to zero gap it. That's when a fusion blade comes in handy

@@budgetclipperreviews3209 so i can just buy the babyliss mim blade or do i need to buy the clipper?

bless you ❤​@@budgetclipperreviews3209

@@ChubyWater yeah it's great stock for all hair textures you may even like it better stock with the tpob cutting blade it's quiet like jrl though. You just gotta try it for yourself