Відео

Not Always, but most of the times it is.

Yes it's a good way to find mew shapes, i use it from time to time💪

I never tested them specifically on that, but if you compare the 600ml from both of the brands, i guess they will be close in terms of covered space (maybe the burner narrowly wins, idk). This said the burner is matt and if you use it well, it's also very smooth. Otherwise the montana one has some kind of textures amd it's a bit less matt and more silverchrome. Thanks for the comment, i hope to be back here on UA-cam soon❤️

Thanks mate 🙏 It was a pleasure having your Company at the Wall🤪 Also thanks about the piece!

Thank you my doppelganger🙏

@@VentOne damn, not sure why I did not follow you. Took like 1hour to find you, needed to go to email to find! damn, atleast found you again!

I hope this will help you out to make a nice chrome piece! Keep it up 💪

Thanks anna! Happy to see you in the comment section! How are you? However thanks a lot🙏🙏❤️

Thanks mate, i like It as well it's so cute and Sharp at the same time🤣

@@VentOne 😂😂

I know, sometimes i just demand too much from myself. The thing is that this is the best and the quickest way to get better. Besides that the most important thing for me is always the lettering, so to me, is easier not to care too much about a color scheme mistake than one about the letters. However i really appreciate your comment, thanks for the noce words, it means a lot. Thanks for the support mate❤️🙏

Thank you really much mate🙏❤️

Thanks for the support brother🙏🙏

Yo sakyyy Yeah, painting the whole wall was actually tuff but yeah it was a perfect gift😅 The tone on tone is always am eyegasm if you ask me, i am Happy you like it, also the background taht for me isn't good enough. I got you about the E, lately i am obsessed with this fat middle stick Es, i guess it will end sooner or later🤣 However recently i am trying to cutback the outlines only when really needed so that i can improove and in the end i like the "a bit dirty graffiti look". Thanks as Always for the super detailed comment, it always makes my day❤️🙏

Thank you pro mate! I need to do a breakdown of the haircut asap Bu the way i miss your videos!

capita

if you are not racking you are just not risking to go in jail mate

It would be so nice to see that!

@@VentOne Don't challenge me. You know I have this MTN Mad MAxxx Chrome just for the prop!

Oh man it's 2:28 am 8 days after you wrote this and i just noticed it, i am looking forward to se that.

Thanks mate 🙏♥️

The thing is that i just think about the most suitable places to paint without getting in troubles, chilling and be focused on the outcome. From time to time i also paint in cooler places than legal spots but it's rare because i don't have many places like that in my area.

Thank you man❤🙏

🤣🤣 by the way IS RACE WEEK!

Come to Naples mate, we have to meet in person🤣

Thank you Bro 🙏♥️

Actually, talking shit without knowing how this wall work is toy. Have a nice day my dear♥️

simple Hall of Fame rules, go over your own shit and leave the dope style standing ..toy@@VentOne

@@bbs_rs not all walls work in the same way smart dude🤦🏻‍♂️ About this one we always paint from left to right, like when you write on a piece of paper. In order to cover always the oldest piece on the wall and to have on the left the freshest piece that has been painted. We do this to make all the pieces last as long as possible. Now, you have all the necessary elements to understand the situation, however, if you want to keep talking shit feel free to do It. At the end your comments do nothing but increasing the video performance🤣♥️

Thanks a lot for this comment, this is exactly what i try to do with this UA-cam thing. Besides graffiti technical stuff, being honest is the key in my opinion. It's the better and the fastest way to learn from mistakes, and after all there is nothing wrong in a mistake, we are all human and making graffiti is hard. I am Happy you had a good time watching this video, this means that it's worth my effort.🙏♥️

No Money no spray🤣

Solo per veri king...😁

Thanks dude, being honest is the key, nobody gains nothing if i pretend something that's obviously not true. Is way better to explain what is the problem. Answering to your question, well: It depends how hot is the day and how much humidity there's in the air. In general i don't wait too much, but it's also true that some days, especially when i pre-paint the wall with a background coat, i have to wait. By the way you will see what happens when there's a lot of humidity, in the next video🥲 Thanks for the support🙏♥️

Thanks a lot mate🙏🙏

Yeaaah i used it also for the following piece but *spoiler* i made it brighter, in my opinion it's even better, i'm looking forward to see your reaction! Thanks for the comment mate, much appreciated 🙏

Yo saky, Happy to see you again in the comment section! Yeah the colors are very nice, especially the Yellow overline, happy you liked the preparation btw. I got you about the E, lately i'm trying to make that middle stick a lot boxy and i like it but yeah... This time i went to far maybe. I really want to paint a character, i just have to draw a good one over and over so that i'll be prepared on the wall, the thing is that when i sit in front of a paper sheet, the only thing that comes to my mind are LETTERS...🤣 But i'll do it, i can do it!

Agreed. Maybe will have insight in non graph life soon

That's true! I am not eating panini for too much time now!

Thanks 🙏♥️

That's another useful thing you can do with that! I never color my sketches, but in the case this would be a nice trick, thanks man!

@@VentOne Thank you aswell for all the videos and everything you do. Keep it up 🤜💥🤛

Yeah it is true, never seen a Better Chrome than the burner!

I don't really know that, since i didn't test its resistance in First person, this said i trust you. However, have you any tips on chromes that are uv resisant?

Yeeeah i know that can, it works well but it has a too high pressure for what i need, to be honest. Besides that, if you have time to make the chrome dry, also normal cans work so it's fine and cheaper. Thanks for sharing this info mate 🙏🙏🙏

Graciasss🙏🙏🙏

Thank you, much appreciated! I hope i can keep this trend 😅

Yeeeeeah! i only take graff seriously, not myself 😅🤣

Thanks mate! During my graffiti experience so far, i've Always been super honest about me and my works, also before the channel. I think it's very self respectful and also it's the easiest way to evolve. In the end, there is simply nothing wrong in admitting that things can be done better, that's why we don't stop painting and sketching. Thanks for noticing🙏❤️

What do you mean by shave down? Like you make the pipe at the bottom shorter? By the way thanks a lot mate much respect from Italy!🙏🙏

Grazie mille man!🙏🙏🙏🙏🙏 Ci proverò anche se non ho tips per chissà cos'altro🤣🤣

@@VentOne bho prova a dare consigli per fare outline clean, sbizzarrizati😂

Cause i don't Need to hide it

Because Vent is a s3xy M0therf*cker, thats why

🤣❤️

Thanks a lot 🙏🙏 That's One of the best compliments i could ever get

Yeah man thanks a lot! And thanks a lot for sharing your opinion about the lettering (which is always the most important thing for me). I hope this tips will help you and everyone who needs them! Thanks for the support, i wish you not faded lines🤣🤣🙏🙏❤️

Pro tip for cutbacks: DONT! No for real it comes down to what you like in your piece but the best tip i have ever gotten from an older writer was to just dont cut your pieces. It feels weird in the beginnig but i swear if you stop cutting, your outlines are going to improve extremely! If you know that you are not going to cut your piece you will have to make the outlines always perfect, sharp and on point. Only way to learn how to do outlines very clean with every piece! But again, it comes down to own preferences. Personaly i like this certain oldschool flavour with dusty outlines and round edges. If you like your pieces cuttet…go for it! :)

I totally agree that the best way to learn is to not rely on cutting back. When I started to wroite it was totally uncool to do cutbacks :) As you said, to each his own. In my opinion there's no right or wrong here. @@ziemlichschnell_2543

Yeah i didn't mention it in the video but i already do it, thanks for sharing anyway! By the way usually do cutbacks with roller paint which is another whole chapter... @TheRutone

Yo, I am down with you i am trying to push myself more and more in that direction! The thing is that if i make a mistake i don't want to leave it like It is, i prefer to fix it. I hope that one day i Will not need cuts anymore, for now i am not that precise. Peace man, thanks for sharing your opinion without hating, i appreciate it a lot🙏🙏