Відео

Curious to why u milled a quater inch off? U can't even tell the difference at 1 inch higher, another quater wasn't gonna kill u. Seems like a lot of work for 1/4. If u wanted a true 1 inch u should have the gotten the Taco Garage spacer/strut reinfornent plate. We did that to my nephews 2024 and we both wished it was higher

it may be a bit painful to watch the slow steady progress but it beats splitting logs with an ax.

where did u order this from??

Efen Toyota. The most basic thing and they can’t come up with a decent way of keeping these in place other than efen tape. Smh.

I'm going to do this. Can you really get the exhaust out without jacking up the truck? Any pointers/suggestions? Every other video I've seen they've had to jack it up. Thanks in advance.

Rough country sells a winch kit for $450 that comes with steel stone guard and diff guard plates, winch mount that fits under stock front clip after proper install.. winch is hidden and truck looks stock. 9500 lbs matching winch is another $350-400 bucks but only works with synthetic rope and not steel cable.

Thanks for making this!

What size of hose clamp did you use?

Nice video! Can I find you on IG bro?

Is this the BPF going on a 2nd gen tailgate?? I thought they only built for 3rd gen?? Insight?? Thanks, and great vid with pointers.

What's your material thickness man?

Any droning in the cab? My last 14’ tacoma trd cat bat had droning. My 2024 exhaust in the back is hidious but i like the quite cab

Would love to see this in action. Have you actually used them in the real world? Second question: How much do these end up weight?

Nice video! Can I find you on IG?

Great video! Very detailed! I just bought this cover and wanted to make sure I did make a good purchase.

Is it normal to have that much watch that deep into the exhaust?

I'm debating if to get one. I dont have spare cash, and a good electric splitter is $400, gas $1000. If this hand pump log splitter would work on big y branch logs save me time and money.

I have this splitter and don't feel any mod required!

Nice video explaining what it takes to finish a mod once you start. Glad it worked out. What distancces to you typically shoot at? Is the AB Arms stable for you?

That was such a cool discovery for me a few years back (Swedish Fire Log). Use them all the time now outdoors. Kobalt 12 inch for me, and 40v batteries. I found a place on Amazon that is called UpForest, and they had a 3 pack of 12 inch chains much cheaper than buying one genuine Kobalt replacement chain. Mine's an R45, but they carry most sizes that I can tell. Glad I tried it. Sharp as heck, and so far have not had any problem with the first one I used. Just FYI.

Similar to what I did with mine, but I didn't use the reinforcement plate and bolt, just welded a knife edge like you made there to the splitting point, and ground it down to a sharp point. Sticks out about an inch and a half. Wanted a good bite into the wood before it hits the wedge sides and starts separating. Haven't had any issues yet other than my front seal is going bad after 5 years. :)

I did similar on mine. Two things I did were change out those Iron Caster wheels for HF 4 Inch Rubber wheels with some drilling and some bolts for axles, and then welded a knife edge piece of metal at the tip of the weld and then ground it sharp. I see from your newer video you did similar. ;) I need to find a seal kit for it though as it is five years old now, and the front seal has gone bad and leaks a lot now. As for the axe comments, yeah okay, enjoy yourself. I have arthritis and this saves me a ton of pain. Your mileage may vary.

Very nice! Looking to get these myself because my truck is also my daily driver and I don't want to weigh it down with 100s of lbs of armor.

Question: When did you purchase this 10-ton Harbor Freight manual unit? I bought mine 4 years ago and it had no such crappy welds on the cutting edge of the cutter head! If mine had had such a mess, I would have exchanged it for another that did not have that problem. Glad you were able to over come it. When I get in rounds and they are too heavy for me to put them on my table at 3 feet tall, I am 74 years old, I work it on to this unit and spllt the log one time. Then I can lift them onto the table with my HF 5 ton electric splitter!

Did you install reinforcement brackets? I heard you have to install them or run the risk of bending frame horns while winching

My tonneau cover was broke into easily. Reread pro

A Fiskars splitting axe works wonders. I've split 6 foot read oak with one before. My Canadian cousin told me to keep the axe from sticking twist your wrists right before the axe hits.

Great Video Thx I made 3 point pallet forks for my 446 they help me get an early start on my potatoes, 9-5 gallon buckets on each pallet in my shop until it's warm enough outside

Great Video Thx that's the same way I unload my Trailer

Nice Job you did there, I need something like your light bar, I have a 1974 Case 446, and I can tell you love working on your Case just as much as I do on mine I built a front end loader and just finishing off a rear grader blade, They are fantastic machines hey I hope you have a lot of fun with your 446

Painful to watch that process but would be useful in some situations I'm sure.

Kind of a cool idea, cutting the whole time in half. I have the electric version of HF's log splitter duo. Wonder if this would work on mine.

Good unit...

What was the rough installation time?

Glad I found this as I'm getting into the midst of a full resto-mod on my 1976 Case 446. Previous owner did a really nice job of restoring the Onan, but unfortunately in the end filled the hydraulic system with ATF. So I'm just puling it all apart and fixing the missing or maladjusted. Any advice on alternatives to the now overpriced and under-available muffler or hydraulic cooler? I was thinking a plate type cooler from Derale would be more efficient maybe even better with an electric fan?

All your mm nos. Are way off. 1inch is only 25mm aprox

I just bought a new one. They sell a new chrome motor with a blue plastic mount it works fine. I suggest putting one of the pasta cutting attachments as a counter weight when using the roller. Thanks for posting this.

Interesting experiment. This almost begs trying petg, tpu, & everything else. Maybe carbon fiber, or glass. Wonder if they make any Kevlar, or silk filament? Both are used in ballistic vests and will stop some pistol rounds. I ordered a 3d printer for the 1st time. Praying it gets here sooner now.

This is also sold by SunJoe and other companies.

This is also sold by SunJoe and other companies.

I have lengthened the vertical cutting edge an additional 2”and will update in the future after testing it out.

Great review was wondering how this did with leaks thank you for covering it!

This works but it has a tendency to clog up the aerators on hard packed soil. Manufactured aerators are usually conical so it’s easier for the dirt plug to move thru and fall out.

Great ideas. As society keeps going into low trust, these will come in handy. Thanks for the video.

I started to do the same thing on my 448 some day I will take time to finish it thank you for sharing

where can i buy the steel support for the engine?

Amazing welds.

a cheaper version......fill it with sand and better stopping power

You must live in a really really bad area...lol

If your carb starts running extremely rich, and your fuel pump and carb are in good shape, check for vacuum leaks. Plugs were wet and smelled like gas, but the carb and fuel pump were good. Found a vacuum leak and after fixing the hose, the plugs aren’t coated in gas or smell like gas.