Відео

Thank you !! Very helpful guidelines.

Very helpfull. Thanks.

hi, Thank you for this valuable video. I would like to ask if the Fibaro Home Center device needs to be within the range of the Z-wave signal of this smart socket? and what is the range of this signal? or can this socket connect to the Wi-Fi network? because I was thinking of placing the Fibaro Home Center in the network room. thank you

Does this work on the Gigabit edition?

Thanks you so much bro.❤

Is it working with Xiaomi AC1200 router? Thx.

when I get to the step at 11:00 I get an error message that it is an externally managed environment and it doesn't install.. It gives me three possible solutions, but I am not at home in linux, so don't know how to continue. The 3 options are for: installing a python package system wide, or a non debian package or a non debian application. Can somebody advise?

I have a router model 4A R4AC (international), and there is no file for this model on the OpenWRT website. I googled and found the appropriate file, and I managed to flash it, but it turned out that this file is for another model: 5g does not work and constant failures in operation. With the help of your instructions, I returned it to the standard, but I want to try again: please tell me where to find the right bin file!

I installed OpenWRT and i have access to admin panel but there is no internet connection. What did i do wrong?

After installing open wrt on my router, which is a xiaomi 4a gigabit edition model, can I use v2ray?? Please advise

is there any initial firewall settings you need to do before connecting to the internet? i want to plug in as modem>nanopi>pc but want to make sure its secure. nothing fancy but to make it at least normal safe as a regular cosumer grade routers

Cool, I'll get one and try it out in a few places ;)

Hoddys, Thank you for your help, it worked for me to revive the router.

Hello SSH Section Error Why and How to Solve

hi, how about using wsl2 instead of virtualbox?

How to recovery from breed web

hello expert i have a Mi router 4c, i changed the original firmware by openwrt-23.05.4 after that i added zerotier paquage. how can i use and configure this paquage. no changes on interface after paquage installation thank you

Am using rear RCA outs to my active studio monitors .. you thing using a rear 4.4 balanced out to XLR will have any significant improvement in sound quality (More depth/Spacial)..!? thanks in advance

What a story❤️

I have xiaomi 4a 100m edition with OpenWrt and I set wireless security to WPA3. Strange thing that my iPhone (iOS 17.6.1) can connect to OpenWrt with WPA3 but Ubuntu 24.04.1 on Surface Pro 4 can't. In my case Ubuntu only connects in mixed mode WPA2/WPA3 and always uses WPA2 variant. Do I miss something?

Xiaomi Mi Router 4A (R4AS, what to do, the update was not successful, it was turned off during the update, now it is constantly orange. The computer and the phone no longer see it. Does the computer have to be connected to a working network?

Its 4A V2 supported ? Because in the official openwrt page of the router its not

Great review . I bought ifi go link based on your review and it works awesome Recently I have returned truthear zero red because of the fit issue and no fun in listening particularly the treble is rounded off I’m confused between these and need your suggestion that suits my taste and also works wonder with ifi go link dac Kefine delci Angel ears vs KZ ZS10 Pro 2 vs Rose technics Star city pro vs Simgot EA500 LM vs Simgot EW300

after su command I enter password from user, and it says Authentication failure. I never set up root pass though.

Bro, Thanks for the guide! Does this patcher support Xiaomi 4A Gigabit Edition v2 (r4av2)?

Not working

Good work bro 🎉

Hi i get "Connection refused" error by FTP [linux and windows]

When I type pip3 install -r requirements.txt I get externally-managed-environment error. I suppose I'm not running the command with said router? My plan was to connect it under another router doing the gateway, do I have to connect the Xiaomi as modem-router?

Anyone use this for gta?

I'm having trouble downloading the Chinese version of the 4A Gigabit firmware. The download process just keeps loading, and eventually, the site throws an error, preventing the download from completing.

any sort of way of doing it on linux will be appreciated

Спасибо тебе, добрый человек. Благодаря тебе я смог "раскирпичить" свой роутер

I flashed it on my device now I think it only operates in wired mode

I recently followed your guide and found it very useful. However, I encountered an issue with the Xiaomi Mi Router 4A 100m (R4ACV2). This is the newer version of the router, and there was no link available for it in your guide. Fortunately, I found a link on a Russian website, 4pda, and managed to obtain the firmware for both the global and Chinese versions. I am currently using the Keenetic firmware for the Xiaomi Mi Router 4A R4ACV2, and it is functioning properly. Additionally, I am using the router as a WiFi extender, not through Ethernet, and I am achieving speeds of 200 Mbps, sometimes reaching up to 250 Mbps, but consistently between 150 Mbps and 200 Mbps on speed tests. The R4ACV2 version of the router I think its start from July 2023, and my unit is from January 2024. Note the R4ACV2 has a metal shield on the right side when you open from the back of the router. Heres the link for the mirror link if you cant download it drive.google.com/drive/folders/1v9qtq15FO0y6aCILoJAIyJQ49eh2D-hc?usp=drive_link Here's the website where I get the actual files 4pda.to/forum/index.php?showtopic=975951&st=5680#entry123743005 and yes I use chatgpt on the first half of this comment but its true im not lying

Nice video, that cable is beefy, i love it. Im pretty new to balanced headphones, i got a fiio m15s and a hiby r4 quite recently (i used a surfans f20 before them). i dont have any expensive headphones yet but i got a pair of Audio Technica msr7b (which has 2 pairs of cables, 3.5mm and 4.4mm) and a pair of kzzs10 pro iems with a nice upgrade cable that has 2.5mm, 3.5mm and 4.4mm which i can switch between using these little 4 pin plugs. My question is about an older pair of headphones i was given, blackweb? (the speakers had come loose inside both the earcups casings and rattled) they have a 3.5mm jack on each earcup, but the included blackweb cable (with an inline mic) is just a single 3.5mm that plugs in one side, either the left side or the right side and gives audio in both cups. So i think these headphones are for left or right handed situations for when your laptops jack is on the opposite side to your headphone etc. So if i remove the wire that links both earcups through the headband and buy a dual 3.5mm to 4.4mm pentaconn cable (or 2.5mm) they will be balanced? Sorry if this is a stupid question, ive never had to repair or mod headphones before. Thanks.

many thanks, your method has work, finaly one person that he knows how to make tutorial

Hello, is this the same procedure for xiaomi 4a gigabit?

Hey do you know if it supports mesh with another router?

Hi i just somehow broke my Mi 4A(International Vers). After installation of the OpenWrt i tried to do sysupgrade via LuCi interface by downloading it from OpenWrt page and uploading to the interface. BUT before uploading to LuCi interface i changed the name of the upgrade file i guess it leads me to stuck in "Flashing..." Screen forever. After waiting more than 1 hour i decided to debrick my Router. I successfully do the Debrick steps you have provided but still cant reach the internet. Problem is in the router, system status light flashing blue and network status light is only blue (not flashing) In the users manual there is no information about flashing blue light (only purple flashing and it says "Safe mode". But mine is not purple. Therefore i don't have any internet connection via LAN. (In the Windows settings still says Undefined Network on my Ethernet.) Also i can't visit 192.168.31.1 for the mi panel. What should i do? Is my brand new router going to trash can?

Followed your guidelines, device flashed orange forever, realized I had bricked it ,realized my model was not English but Intl 😢, debricked the device using your video and after trying again it worked🎉 thanks a lot👌

Great installation guide. I came here to find help with the settings , unfortunately they are either messed up with the light I have or they just don’t work as labeled.

Thanks a lot man.

Thank you so much......

You R Best BRO! give me a donation link

Just finished setting up my wireless access point with your quite easy to follow instructions, was great to find someone who explained it so plainly and easy, whithout not feeling overwheelmed, (this is my first try at openwrt), the devices I connect to the network connect to the internet, but what I'm looking for is to have this network completely bridged, the router has it's own IP segment so devices connected to this router won't see the ones connected to the main one.. is there a way to completely bridge the network? (I'm using this router as an extender) thanks again,

what might the problem of my xiaomi gigabit 4a router it keeps blinking in orange color?

Love the review thanks! I do both gaming and listening to music and honestly only bought the dac cuz my dangle just transmits 24bit 44khz and using tidal felt a bit like a waste. Dac should arrive around Thursday thanks for the review love to see I made the right choice from what u comment!

mine just stays like this and stays like this all the time 18:25:03 TFTPd:DoReadFile:test.bin B:0 T:0

i installed openwrt 23.05 on my d-link dsl-2740b/f1 but i don't have wireless interface options, what do i do?