Відео

it also happens when you have an empty battery or no power, I use 2 s batterie

or the wires from the esc do not make contact or are interrupted

@@RC.G.M.DTruckconstruction I don't think it's the battery because I always keep the batteries charged

was it working fine before or is this your first time using it

@@RC.G.M.DTruckconstruction this is a new lesu truck i bought from tucano hobby

the sound can be changed from the settings but I like how it sounds different from Scania and Iveco. 👍

I will try to fix it and post a video if I succeed

it's great, I like it a lot, I didn't have any problems, I'm glad I made a good decision, try to buy XDRC. loader are the best in rc

Hello .I don't know exactly how much oil I put in, but I added little by little until the ramps on the trailer started to rise. I will make a trailer video tomorrow, as someone asked me before and I promised to make a hydraulic video. I used oil from rc4wd ISO 32 just like with the rc loader you can see video with unboxing with the komatsu loader how the oil looks👍👍

@@RC.G.M.DTruckconstruction Thank you very much for your reply. I will be paying close attention to your videos, I like them a lot. Do I apply the oil where the yellow screw is?

@juret-i2t Yes. yellow screw

you need a controller that works 2 receivers not all work I use paladin pl18

I mixed the channels on the trailer with the truck from the remote control, I'm sure AS I showed in the video

when you plug the cables to the hydraulic pump, you will have to put the hydraulic oil in the tank and if it is connected the other way around, it will release pressure on the screw from the oil tank, it will release the oil, if it is installed correctly, it will not release the oil, I hope it helps you

@@RC.G.M.DTruckconstruction wow and cheers, because of the stupid diagrams and useless instructions I'm still trying to do the wiring, I've got all leds ready and soldered the power supply ready for battery BUT not sure wear all the connectors go the 3 wire harnesses, like the servo and reciver. Point is if any one has made a map of it correctly connected I'd be extremely grateful, I'm no dumby when it comes to wiring diagrams but this is ludicrous, and I'm definitely not the only one. What is annoying is I bought this just before the pandemic but I didn't get I'll I've got extreme depression so between painting and bad instructions/diagrams I'm still at it, not mentioning I paid $2000.00 Aus for it and can buy one put together for almost half price from TOUCAN now which doesn't help my mood 😕😞 😖

@leewilliams9904 keep calm take your time look carefully at the instructions it's more fun when you build it 👍👍👍

@@RC.G.M.DTruckconstruction my instructions do not show which wires go to wear on channel reciver and I am very concerned about shorting it out I can't afford more Ruddy parts, and going by the response on the internet I'm not the only one, if any one out there can draw a basis diagram I think I lost of people would be thankful if I do figure this out I WILL POST MY OWN

@@RC.G.M.DTruckconstruction PS I live in the country no were near any help, that is why I have asked a fellow RC builder for help

check the trailer video you can find everything there

you should have option in youtube for italian translation

@@RC.G.M.DTruckconstruction ok🙏

You said it mate feel exactly the same way, instructions are useless and now it's sold out together for the price I paid as a kit, also no stickers total rip off

I don't suppose you could draw a diagram showing what colour goes to wear especially joining reciver. It would be greatly appreciated 👍 I've blown up way to much stuff on other projects and I can't afford to do that here, cheers

@leewilliams9904 i will try to do today👍

@@RC.G.M.DTruckconstruction cheers mate bit late for me, won't be able to do anything for 3 weeks now as I burnt one of my speed controller, I've ordered 2 one for the leg's (burnt out) and a spare for the oil pump just in case I've ruined that.... This is why I've been searching the Net to try and avoid this from happening, PLEASE HELP OTHERS SO THEY DON'T GO THROUGH THIS, it's getting to expensive for small mistakes. CHEERS 🥳

I don't have any problems, it doesn't leak, it works perfectly. The only problem was when I put the electric motor on, I connected the wires wrongly, and it was spinning the other way and giving me the oil out.

leave the hydraulic power at 30-40%, it is enough for the ramps

@@RC.G.M.DTruckconstruction Yes I noticed that when it was working well

if you want me to help you with something, send an e-mail with a video of what problems you have.

Thanks. My next step is to move the pump outside the trailer with spare tubing and eliminate the motor/pump

I bought from Aliexpres

it doesn't have a differential lock but it has enough power

​@@RC.G.M.DTruckconstruction 감사합니다😊

with pleasure👍

it is quite expensive around £1500 lorry and trailer and radio remote control

Thank you 🙏

I will try to make a video next week when I have a day off

Hello before painting, test the ramps to be slightly straight, I made bigger holes but I didn't know that you have to straighten the metal that goes into the ramps I painted in the cold and they dried hard, I heated the room but it wasn't warm all the time

for the lights, try to run the wires on all the channels of the lighting system so that it works ok, if you still need to know something, don't hesitate to ask

@@RC.G.M.DTruckconstruction Thank you. I got another tip for before painting to spray with brake cleaning fluid to get rid of any grease.

I painted directly, they are already prepared for applied paint

@raycleary7090 do not use Acrylic Spray Paint on metal it peels quickl

Thanks 👍

👍👍

Excelente trabajo

Thanks 👍

it's great, I can't wait to paint it and build it

it's great, but the cabin is worse plastic, I changed the front bumper after a few months, the plastic grinds and the screws it’s bad , you can't unscrew them, the quality is bad, but it looks good

🤣🤣👍

it must be used a few times 2/3 times and it will be ok

@@RC.G.M.DTruckconstruction cool i think that from the Oil He's new when you fill it the tank like first time 👍😊👍

if it is not used for a few days, when you use it, it goes very slowly

@@RC.G.M.DTruckconstruction very well is this tipper truck from LESU Or scarlet

@evilwithen1359 scaleclub was written on the box

in the future you will buy an excavator, I think it is better than Loader 👍👍

But the bucket size of the front loader is wayyyy bigger than most excavators​@@RC.G.M.DTruckconstruction

a new video is almost ready with the new gearbox 👍👍

​@@RC.G.M.DTruckconstruction😊 good 👍

8x4 with differential lock 👍

​@@RC.G.M.DTruckconstructionthank you👍

is my pleasure to answer any questions 👍

1900£ uk.

The price for the loader is about 1800-1900 with taxes 😅