- 18
- 31 211
zglgo
Приєднався 3 лип 2021
2008 BMW 135i - Speedtech Bottom Mount Single Turbo Install (Pulsar 6466)
Filmed in and out of me installing my speedtech bottom mount turbo kit. Feel free to leave any comments if you have any questions about the install/kit in general.
Will be datalogging and working with the tuner to get the car dialed in, after that expect to see some exhaust clips of the car.
#bmw #135i #singleturbo
0:00 Intro
0:16 Prep Work
1:53 Turbos Out
2:48 Oil Pan Gasket
3:36 Clocking Turbo
4:53 Installing Turbos
6:45 Intercooler Piping/Cooling Piping/Wastegates/MAC
9:03 N20 Sensor/ PnP Kit Errors
10:13 Final Thoughts/Rambling
Will be datalogging and working with the tuner to get the car dialed in, after that expect to see some exhaust clips of the car.
#bmw #135i #singleturbo
0:00 Intro
0:16 Prep Work
1:53 Turbos Out
2:48 Oil Pan Gasket
3:36 Clocking Turbo
4:53 Installing Turbos
6:45 Intercooler Piping/Cooling Piping/Wastegates/MAC
9:03 N20 Sensor/ PnP Kit Errors
10:13 Final Thoughts/Rambling
Переглядів: 1 310
Відео
2008 BMW 135i - Introduction Video
Переглядів 1513 місяці тому
Quick video of introducing the car to the channel. Next video you see if this car will be it running after the ST install. #n54 #135i #bmw
2008 BMW 135i - N54 Single Turbo - Speedtech Unboxing
Переглядів 1254 місяці тому
Will be shooting a video going over the car and what has been done to it in the next video. Just a quick unboxing video here for now. 6466 PSR Turbo Off the bat already facing issues, the turbo kit was missing the turbo housing haha... working with speedtech to figure that one out. #n54 #singleturbo #135i
2008 Yamaha FZ6 - Naked/Street Fighter Conversion Overview
Переглядів 3,9 тис.10 місяців тому
Wrapped up my FZ6 Naked conversion over this summer. Had a fun time doing this as budget as possible. I think almost all the parts came from aliexpress minus the headlights which came from amazon. The headlight wasn't too bad at all, just had to repin the two plugs into a single one and it worked perfectly. I purchased a speedo cover for the S2 FZ6 Speedometer to clean up the look. I think the ...
2010 BMW 335d - 1 Year Ownership Update (Mods & Maintenance)
Переглядів 1,3 тис.10 місяців тому
Just a video outlining the things I've done to the car this year. Overall, the first year of ownership has been super enjoyable. Done around 35k kms on the car so far. Mods -M-Sport front and rear bumper -M-Sport black anthracite headliner Maintenance -BMW Pipe Exhaust-Gas Pressure - Genuine BMW 13627812806 #bmw #m57 #e90
2008 Yamaha FZ6 - Walkaround
Переглядів 444Рік тому
Hi everyone, im excited to share the newest addition to the garage. Im just shooting this walkaround video to document my build before I start modding it. Stay tuned for future videos. I'm looking to do a streetfighter/naked conversion so look forward to content on that. #yamaha #fz6 #motorcycle
2010 BMW 335d - Apex ARC-8 Hyper Black 17" & Apex Stud Kit
Переглядів 1,4 тис.Рік тому
Installing my APEX ARC-8 Hyper Black Wheels and the Apex Stud Kit i say Hyper Silver in the Video but they are Hyper Black finish specs are as follows 17x9" ET 30 - Hyper Black APEX m12x1.5MM BMW 5 Lug Stud Kit (75mm, Hex Head, Black) Kumho ECSTA PA51 - 255/40/17 Car is lowered on H&R Springs, will probably get 5mm spacers for the rear. #bmw #apexraceparts #arc8
2010 BMW 335d - BMW HiFi JL Audio 6 Channel Amp Install
Переглядів 460Рік тому
just a quick video on installing my JL Audio Amp - i got the marine edition of the JL XD600/6. The install was super easy with the technic PNP kit - technicpnp.com/ Power went to the stock BMW battery distribution block and all the cables straight into the amp. Its difficult to film an audio comparison but the biggest difference is the bass and the clarity. I'm extremely happy with the audio af...
2010 BMW 335d - Ice Drifting POV
Переглядів 127Рік тому
First time trying out out my go pro - need to still dial in my settings and angle to get a proper POV. On cheap chinese winter tires - sailun ice blazers, they're honestly pretty solid and ive been impressed with them. Ice performance isnt there though, super easy to spin out which i would assume for any non studded tires? Will need to try out studded tires next time. #drifting #icedrift #335d
2010 BMW 335d - Whitbread Turbo Outlet & ATM Intercooler Install
Переглядів 453Рік тому
Wanted a permanent solution to fix my boost hoses - the upgraded MTC hose did not hold up too well (retaining clip blew off). just documenting me installing the Whitbread turbo outlet and an ATM Intercooler. Was able to find the intercooler from a local wreckers for 400CAD. #335d #bmw #diesel
2010 BMW 335d - BMW Wireless CarPlay Andriod Auto CIC - Install and Coding (NCSExpert) - Mr12Volt
Переглядів 1,5 тис.Рік тому
My GoPro diddn't end up recording the audio so I had to add some voice over while editing. Sorry about that! The MOST connection was a might confusing and I tried my best to explain but essentially you just need to swap the factory harness with the Mr12Volt and vice versa. The Mr12Volt installation kinda explains it. Really happy with the install so far, ran the backup camera and mic off camera...
2010 BMW 335d - BMW E90 - Xenon, Fog and Door Light Upgrade
Переглядів 155Рік тому
Sorry for the poor camera quality, most of it was filmed in a dark lit area. Recently got a GoPro so hopefully the rest of the videos filmed will be better in quality. Upgraded the Xenon Bulbs, Fog Lights, and Door Lights in this video. Pretty simple upgrade with some coding required. Coding Help ua-cam.com/video/aPApyIFPbCc/v-deo.html 0:00 Introduction 0:35 Door Lights 1:19 Fog Lights 2:10 Xen...
2010 BMW 335d - M57 - 335d High Pressure Fuel Pump Install - R90
Переглядів 10 тис.2 роки тому
Just installing my r90 high pressure fuel pump (HPFP) on my e90. Please refer to TuneMyEuro for a good video over the fuel pump removal. Helpful Resources www.e90post.com/forums/showthread.php?t=1387137 Another helpful video from from DK Garage ua-cam.com/video/fk963t7BjaQ/v-deo.html TuneMyEuro's videos ua-cam.com/video/5c9PlWxAWFc/v-deo.html ua-cam.com/video/ndEQRaX97zY/v-deo.html This focuses...
2010 BMW 335d - MTC Motorsport Boost Hose Install
Переглядів 8792 роки тому
2010 BMW 335d - MTC Motorsport Boost Hose Install
2010 BMW 335d - BMW E90 Full Interior Swap
Переглядів 1,9 тис.2 роки тому
2010 BMW 335d - BMW E90 Full Interior Swap
Where did you buy your speedo from?
The shroud came from aliexpress vi.aliexpress.com/item/32889386579.html?spm=a2g0o.order_list.order_list_main.281.45db18028KY7gW&gatewayAdapt=glo2vnm
400bhp can be made on r70 maxxed out?
What Jl amp did you use? I have same hifi stereo. Thanks
@@IBtraveling mine was a marine edition M600/6, any 6 channel amp will work for hifi
@@zglgo thanks
Bar lights look better imo nice build tho
Is there a digital installation guide bro? Great video btw, super informative, thanks for the tips
I followed ECS tuning guide to remove the turbos, diddnt drop the subframe though just hung it from the suspension after removing the sway bar end links. Then the single turbo install will vary a bit depending on your kit (I’m sure they will have instructions) but it’s more or less just in reverse plus some extra piping/lines.
🔥🔥🔥 got the speed tech top mount kit 🫡🫡
Did you do anything with the HighBeam ground?
Bro i might be getting a bottom mount garrett 3582r gen 2, would it be same process?
If you’re getting a kit from speed tech it would probably be exactly the same. The general process will be similar to most kits though.
Did you cut the tab on the subframe that they say to in the instructions? The picture is hard to depict as to where it is and they don’t specify, if you did where was it? Currently doing the same kit
@@savagecr-x2438 yes I did, it was blurry as hell and not clear but it was the only tab in that area, I don’t remember if there was a hole drilled out for that tab. Let me see if I took a photo, do you have an email or contact I can sent it to if I find it
@@zglgoeverytime I put my info UA-cam deletes it
Lucibellosautobody
This bike are reliable for long last?
Based on my search on the forums, people are able to get a good amount of miles on these bikes without issues. Classic Japanese inline 4 formula been running these motors in many of their bikes. I don’t have the bike anymore, purchase a triumph street triple, will probably try to shoot a video on that
I’m getting one put in right now
let me know if you have any questions boss! I'm pretty active and usually check youtube at least once a day. The car is going to sound amazing and run great with the single
@@zglgo only concern is blowing axles or the transfer case
Hey bro, whats your height? Im getting the same bike today
I’m 5’7, wasn’t too big at all for me
For the speedo get a piece of 2mm 110mmx130mm steel plate and weld it to the stock backing plate that has the 3 rubber mounted screws that originally held on the speedo to the stock bracket and front fairing/lights. You’ll need to cut it off as you only need the piece with 3 holes… then when it’s welded together at the angle and offset you figure, bolt it to the underside of the top yoke. You already have a bolt hole you can use so you only need to drill and tap one hole. You need to cut a half circle out of the plate to make way for the key barrel.
Are you from Europe? Bcs km/h Speedo
From Canada
Where you got this exhaust from? Can you share the link. Sounds amazing 😍
From aliexpress, I just searched up fz6 exhaust. The seller shop name was bestrade racing parts store.
@@zglgo thanks 👍
Working on my street fighter now! Love the fender that’s what I’m looking at parts for now👍
I thought the later 335ds came with a r90 pump as standard???
Looks awesome 👌 Great choice for an easy streetfighter conversion. Ive done a few myself. Sv650, Bandit 1250f, and a CBR954. Just lots of black paint and black shrink wrapping wiring cleans things up. Once you start you just keep going. Id change the sprockets and chain to a 520 kit and drop a tooth in the front to start. Much better then most of the new options at a fraction of the cost. Long live the Inline-4's ❤
Why does your title say hyper black?
per the description "i say Hyper Silver in the Video but they are Hyper Black finish" I misspoke in the video, but they are the hyper black finish. at 0:04 seconds you can see the label on the box.
Ok, do you still like the color? Can’t decide between the race silver or hyper black, I’ve got an Arctic silver e36
@@ridemtns13 Yeah its a great colour, changes quite a bit depending on the light. Get a good mix of a light looking colour and dark colour. Somewhat similar to the e39 shadow chrome rims
Verifying this is stock turbos delete and r90 and it made 400 wheel and 630 tq
my wheel torque was a bit low at 530 but yes. Should be around 400whp and 600tq
@@zglgo are you running aftermarket injectors or oem
@@dieselbimmerr stock oem
Why not get the m50d rail sensor to compliment the r90 pump?
I put stage 3 turbos and dual fuelpumps, were should I be in hp?
umm u didnt show how to hook up the technic harness and settings on the amp or anything at all, what did u set input voltage to on the top of the amp? low or high? can u still code or tune the car? did u just disconnect the tweets in front doors and mid in dash if u upgraded ur front door speakers? i assume u did since u use the jl 6 chnnl. or are the tweets on same chnnl as the front doors and still play once technics is hooked up to amp and factory harness?
Its super easy to connect the harness is labelled to what it needs to connect onto the amp. I dont remember think there was an overall input voltage for the overall amp but there was individual gain per channel, that you can fine tune/mess around with how you like your audio to sound. Yes you can still code the car/tune it, does not impact that. the speakers with tweeters are on one channel, so you do not need to disconnect the tweeters, and it works fine.
@@zglgo do u actually have to disconnect the mid dash driver? if tweet is on same channel then we dont need 2way in front door. we can use upgraded components in front door for mid and tweets. jus find out what tweeters fit in the corner.and wire to go from mid to it.
@@jackhere4594I had the hifi system so i did not have a center speaker. If you have a center speaker that would be the logic 7 and i believe that its a 7 channel system, you would need to do your own research on that.
@@zglgoin my 335i we have hifi or harmon kardon hifi. i have the regular hifi, pretty sure both are 7.mines jus a more flat response than the hk which is what u want.seems to much to solder wires to a new mid and then to tweeter which is how bmw did it , used a wire/output connector to go to the tweets from the mid(their way). i see now the marine version JL has no input voltage option.
Hey! i am having trouble on knowing what to do with my dual headlight with the 2 connectors, i am wanting to use the same headlight that you got from amazon and am unsure of the process. I am needing your help :)
Its very simple once you start testing and playing around with it. Of the two connectors one will be for the DRL and one for the highbeams. You can test the amazon headlight by plugging in these cables one at a time and seeing if it turns on when the bike is running(DRL)/when you turn on the highbeams. Once thats sorted you want to bridge the headbeam power connector/pin to the connector to the DRL (essentially open the connector and take out the pin and put it in the empty slot for the other connect).This will also the bike's headlight to be on when the bike is on and the highbeam to turn on when you press the button.
@@zglgo awesome thank you, I will try that and keep you updated! I have a 2006 fz6 that I'm working on
@@zglgo would i be able to get the link for that particular headlight
@@philempire9776 The brand is "BLIAUTO 7" 7 Inch Round LED" but they're all the same generic Chinese round headlight. All the amazon sellers will be selling the same stuff.
@@zglgo how did you end up taking the pin out of the connectors? i am unable to find any video on it and i treid doing it myself but afraid to break the plastic edit. and what did you do with the second ground wire? did you just wrap it up in electrical tape
👍🏻👍🏻
Bro I see you did intercooler and fuel pump how much power increase did you see?
I diddn't have a dyno run with the stock fuel pump, but the dyno with the r90 pump was 400whp
Is it deleted?
yep it's deleted.
@@zglgonice im trying to figure where i can get mine deleted
If youre in north america, join the "North American BMW Diesel Owners Group" on facebook, lots of discussion and resources on that page. You will find everything you will ever need on that. @@shadowsiren3058
You just talked and didn't do any job to show how intercooler move out
My dream bike, saving for it hopefully 2024 im on the road
Hey man how’s it going I’m currently bout to get my bike summer !😊
@@youngraf790same, but also looking for something from the supersport class
I just bough a 2010 blue FZ6 last year. Man I love my FZ6! So versatile
nice
I installed a very similar setup in my e88 and ran into the same issue where CarPlay doesn’t load on the cd drive because I don’t have a cd-changer. What are the steps to coding? A little lost on that front since I’ve never done it before
You will need to code the vehicle option to have the CD/DVD option into your car. You need to be able to see CD/DVD in your idrive menu. There should be a much of youtube videos or posts on the forums on how to code in vehicle options.
@@zglgo thank you!!
Love the vid! Keep it up!!
Had a 2007 all done up like what you're wanting. Great bike! I recommend going up a tooth on the front sprocket, Makes it feel a little more torquey down low, and can be done for very cheap
Is your car lowered?
H&R Springs
thanks for giving an idea of how to do the install. after reading the forums did you splice into the original mic from the car or run the new one that came with the kit? Alos might be helpful to provide a link to where you bought this.
I just used the aftermarket mic that came it, the quality isnt the best. Not sure if theres a work around on using the factory mic/splitter option. I purchased it from a forum member but you can purchase directly from their website. www.mr12volt.com/
How did you hold the crank in place while you torqued down the nut for the pump?
If i remember correctly I had a buddy hold down one of the bolts on the pulleys and was able to tighten it down this way
Cranky but it cranked!
Straight pipe?
Insane sound
𝐩𝐫𝐨𝐦𝐨𝐬𝐦
whooaah! stock turbos, r90 pump and emissions delete?
Crank hp
@@roboticvenom1935 should be wheel, If its crank then its a mild tune
@@roboticvenom1935 no, not crank hp 😂
Thanks for the video, I have a different unit for carplay which uses the AUX connection for audio, planning to switch to this one to use the MOST connection. How has the audio experience been for you so far? good base, mids and highs? Do you notice a difference in volume level when switching to stock Bluetooth/cd /radio sources. Reason I ask is because I have these issues and wanted to see the experience with this unit. It would be cool to see how you routed the microphone to the stock location too.
i'll double check on when switching from carplay to radio, cd etc... I don't think there was a noticeable difference between volumes. The microphone was just routed behind the glovebox up to the a pillar and from the headliner to the stock location. I moved the stock mic to the right side and put the mic in the oem location.
Hi Eduardo, I just checking switching between radio and cd(Mr12volt CCI box) and the volume were pretty much identical. No need to adjust anything after switching
Engine Running without Tune for the r90 ?
yep it will run fine without any tune. Ran it for two weeks before getting it tuned. Will be uploading a video of the dyno in a few weeks.
What mods you have?
@@stanislavpoplavskij7717 pretty much a stock 335d other than it being deleted.
Thanks for sharing sir !!
This looks so much better. How long it took you to swap the interior, is it a one day job or?
yeah its a super fast job. Definitely still a one day job for a first time swap
Nice car bro I just copped a 2011 and was wondering what tune you used and how much was the downpipe
Car was deleted by the previous owner. The tuning was done by ECU Program : www.ecuprogram.com/ Downpipe : www.unobtainium.ca/store/p23/BMW_e90_335D_DPF%2FSCR_Delete_Pipes.html