Відео

It works not only in the dark but day light. Tulip night light is a high-definition mirror when turned off.

@LennoCao thankss for Response

You guys make great toys!

The book building part is so simple and it will be too long for the video if add that part. Some of the fans have the same question so I made the videos fully complete after this. Thanks for your support!

You can reconnect the solder joint with a specific tool or just contact the seller for a refund

Battery works fine. I don’t think it can be connected with 220V.

Use rubberband to make it move

Thanks

Glad you like it

Hi unfortunately I have not done a video on an octagonal one. They should be relatively the same process. Which one did you have in mind could you send a link?

You could contact the official website and ask for a free delivery for the broken parts

You need watch my channel regularly 😉

4-5 hours

Yes it was haha! The pieces are so intricate and the process is so relaxing, the end result is so worth the wait 😄

Glad you like it 😋

That’s why people need watch my channel hahaha

Very good quality and making process is smooth. Fun project!

search" trulip lamp" on Amazon.au. they come with a kit.

I am sorry to say nope. But this is a really good idea.

@@ginaartsgallery yep, I will try buy a personalized sand box

Buy new lamp

Check the Battery Orientation: Ensure that the batteries are inserted with the correct polarity. Usually, there’s a + and - sign indicating the orientation. Test with a New Battery: Sometimes, the issue might be with the battery itself. Try using a fresh one to see if that solves the problem. Check for Loose Connections: Inspect the wiring and battery compartment to make sure everything is secure. Loose wires or connections can prevent the circuit from completing. Clean Battery Contacts: If the contacts inside the battery compartment are dirty or corroded, use a cotton swab with a bit of rubbing alcohol to clean them. Inspect for Damage: Check if any wires or components are damaged, as this could prevent the light from working. Check Switches and Buttons: Ensure that any switches or buttons that control the power are functioning properly. Sometimes, they can get stuck or disconnected.

@@ginaartsgallery thank you it worked

And u got a new sub 💗

Thank you for the kind words about the video! And no worries at all-your English is great, especially for tackling a complex DIY project like this at 14! For aligning the 7-fingers gear in the same position, follow these steps: Identify the Starting Position: Make sure to note the position of the gear teeth before making any adjustments. If you have a reference point, like a specific tooth aligned with a mark, it’ll help. Rotate with Care: If the gear needs to be rotated into a specific position, gently turn it in the desired direction until it matches the reference point. Check Alignment Regularly: As you continue assembling or adjusting other parts, make sure the gear stays in place. Sometimes, other components might shift it slightly, so double-check before finalizing the assembly. Reverse the Orientation if Needed: If the gear is in the opposite direction at some point (like in the time you mentioned), carefully backtrack the steps you took to see where it might have shifted. Disassembling a small portion of the model might help realign it properly. It can be a bit tricky to get gears to align perfectly, but with patience, you’ll get it! If you need any more specific help with this, just let me know!

Maybe in 2 dollars shop or DIY store

Glad you like it. Happy Halloween!

@@ginaartsgallery Happy Halloween to you too 👻

Make some and paint different colors will be fun

Hi! You could try taking the light component apart and readjusting the wires and battery, as it could just be a faulty connection. Hope this helps you, if not please ask again ☺️

@@ginaartsgallery ohh thank you so much! :)

You may watch 2:36-12:55 for the gear part

Normally I would start with the testing if the usb is working.

They come from a kit

Glad you like it

Thank you

Bonjour, lampe de nuit miroir tulipe

It often depends on how frequently the lamp is turned on. If it uses standard AAA batteries, it can typically last anywhere from several hours to a few days of continuous use. However, for intermittent or occasional use, the battery could last much longer.

Two way

@@ginaartsgallery this glass length?.. Cm?

10cm

@@ginaartsgallery There is nothing to gain here

Tulip flowerhead, Tulip leaves ,Crystal beads ,Glue stick , Anti-collision corner /silicon corner pad,Light strip /fairy lights,2-way mirror

It is come with a kit. You can find it at Amazon.au or Temu.

Thank you my friend❤ I can't find this mirror any where 😢 What is the real name of mirror? ​@@xynabzander4993

I used a round battery, use it according to the size of the in the kit. I am unsure how many Amperes it requires.

@@ginaartsgallery damn thats fine but whats the voltage of battery is it 1.5v or 3v or 6v or 9v just tell me this. and how many batteries it has at a time 1 or 2 or 3

Glad to hear that you like it! I am improving every day!

Wax makes gears and parts working smoothly. You can use candle. It is easy to get.

Some of the cheap kit on the market are low quality. I don’t recommend any kits price below 15 dollars.

Most of the reason why they won’t turn is the plastic nut is too tight.

@@ginaartsgallery Okay thank you!!!

Thank you ☺️ your kind words are much appreciated.

You can twirl the remaining wire around the base, it will create a better effect on the tulips. Hope this helps ☺️

Hi there! Thanks for reaching out! It sounds like the big brown cog isn’t fully aligned with the smaller ones, and that could definitely cause some issues. Here’s what I recommend: Check Alignment: The large brown cog needs to be properly aligned with the smaller ones for smooth turning. If it’s slightly off, you may need to loosen it and carefully readjust its position. Ensure it's centered and aligned with the new smaller gears before tightening again. Inspect for Wobble: If the big brown cog is rickety, it may not be seated properly on the shaft. Double-check that it’s securely attached and that there’s no excess play or wobble. If needed, you can remove it and carefully reinstall it, making sure it sits flush and tight. Review Step 4: You mentioned the difference between yours and mine at Step 4-this step is crucial for the proper alignment of the gears. I’d suggest revisiting that part of the assembly and ensuring everything lines up as it should. Go Back if Needed: If things still don’t seem right, don’t hesitate to go back a few steps to see if anything was missed. Fixing these issues early on will prevent bigger problems later in the build. Take your time with it! I know it can be frustrating, but getting the gears to turn smoothly is key for the whole project. Feel free to let me know how it goes or if you need more help. You’ve got this!

Hi! As the lotus increases like 6,12,18 stitches in each round resulting in consequently 3,6,9 petals, I would recommend increasing in increments in 6. Like round 1, 6 sc, round 2, 12 sc, round 3, 18 sc, round 4, 24 sc… etc. increase the rounds until you reach the size you are happy with, hope this helps!

You could also use thicker wool which would give you a bigger flower using the same pattern ☺️

The hook I am using in the video is 2.5mm 😃

You could try switching out the batteries! Let me know if it still doesn’t work 😉

Yes, after each slip stitch that finishes off the previous round, start the next round with ch 1 and then continue each petal. Sorry for the confusion hope this clears it up for you ☺️

​@@ginaartsgallery Thank you so much! ❤ i have already made a mini water lily thanks for you tutorial ❤️ does a medium water lily have a different pattern?

Thank you for your support! I have replied to your recent comment. Hope it helps!

Hi! If you were to print out the picture make sure it is double sided so that when it reflected in the infinite mirror it would reflect back the same image, this idea should work!

You could also have a look at my other video titled “DIY infinite tulip mirror light” which may give a clearer idea of how this idea might work ☺️