Відео

So you're the reason they're sold out of all the good colors haha

I only know creality … and i just try and manually add some supports there if u can get the mouse to go just right … but usually works best for me using regular supports … trees are awesome but gotta just waste the pla making regular supports most of the time for me

Have you tried working the shaft?

Best of luck! I hope someone provides you with the information you need. :)

Manually paint the support, and if using AMS, use PETG support interface when printing with PLA, or PLA support interface when printing with PETG.

hope you don't mind but I shared this on x. I'll do a review vid once received. Thanks again! Just what I was looking for.

ordered!

you're amazing! Thanks for doing this. I"ll be ordering one shortly.

I have a question I helped you out. I believe two of your problem videos but I actually don’t know what you do. What are you trying to make with your printer form?

I like the printers inside a tent 👌🏻👌🏻👌🏻 once i have all of my stuff together ill probably move my k1 to my second smaller tent thats just used for overflow of stuff atm

Split the objects in the slicer and if one fails you can always cancel just that one and save the rest of the prints

Nice work!

OOOGA BOOGAAAAAAAAAAAAA

What makes me nervous is your tubing

funny you talk about blades bc all i think is "razor":D no hate, great beard i am just not used to such beards

Doesn't bamboo's have an exclude object option? In klipper you can cancel just the failed part and continue printing the others. It can be really handy.

any chance for a single bc-250 shroud setup in the works?

Corexy baby

printing anything on a bedslinger table is enough to make me nervous 😊

I would love to have a double set up like that

It depends on the parts. The bit on the right side of the bed would def make me nervous because if the two tall parts aren't attatched. Because then it could easily be leveraged off by the print head due to the width

Thanks for sharing such valuable information! I need some advice: I have a SafePal wallet with USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). Could you explain how to move them to Binance?

Prusa has the cancel objects feature built in, it’s so useful

Why not see if u can print bigger knobs … the foam board is probably soft enough where plastic knobs will work instead of buying bigger rubber ones

Theres a plug for octoprint where you can just cancel the one that's failing.

I made this mistake when I was printing some things for my workplace. Had them all sererated automatically with like 1mm spacing and one went off and the rest came with it. So I lost them all.

I usually print a sub assembly of related parts at once since I can be sure they will all be scaled to each other correctly this way.

Amazing work, please wear a mask ❤️

everytime, because its never worked for me. but yet I still try again some other day 😂

Generally it’s safer to print single parts for higher detail but speeding production is also pretty nice

Try adding a purge tower. Should be in bambu slicer settings

That is easy to do if you go to the preview screen, you could tell it to change colors at a layer height. Just change it at layer six to black but realize the yellow layers need to be at least five layers and with I would think that would be zero point 2 for the layer height times five so 1 mm perhaps

if they are separate objects you can print them separately by object and print the remainder in black somewhere else and combine them. The problem is that if black and yellow co-exist on the same layer, you have to print your 1st layer together, no matter the color, unless they are separated. What I would recommend if you're simply trying to prevent your black and yellow converging is to purge a greater amount of filament between colors OR separate the colors into their own objects and combine them as part of post processing.

A little bit of wobble 😕 but so far looks ok

Yeah kind of if it messes up at the end then that was just a waste of filament so yeah I guess😅

Yes, it does. It does make me really nervous. Have you ever done a two day print and it failed at the last second man that hurts to the core

Thanks, man. How much did you pay for CMPs?

That mod is so nice looking & thanks so much for the tape recommendation. I've been messing around with too many Mr. Right Nows in the tape game & need a Mr. Right. Side note, have you considered covering the two perpendicular gaps along the top? Some of mine are in an open-air setup & noticed a lot of air wasn't completely moving through the entire length of the cards. Keep it up!

Hey man, congratulations! I am now subscribed.

What filament are you using? Some filament brands give trouble on the 0.2mm nozzle for some reason I can’t understand

Are there any peeps who have got these unlocked?

Just curious, what made you decide to go with Bamboo Labs for your printer farm as opposed to Prusa or any other printer?

I recently saw someone hang their filament while feeding, so it's not sitting on the shelf. That might give you some more room, too. Just an idea, good luck mate!

I can send links but you’d have to pay for shipping. Bozeman Montana people are selling ended 3 pros for less than 100

Thank you so much for this amazing video! I need some advice: My OKX wallet holds some USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). How should I go about transferring them to Binance?

It looks like wear, from something.. get a nice LED light and do some poking around

Do you have those dark spots before or after ironing maybe try sanding it a little bit before you iron it

Have you tried a different infill pattern?

My guess is that its either grease being how grease be and getting everywhere or its particles from a belt wearing down

Thank you so much for this amazing video! A bit off-topic, but I wanted to ask: My OKX wallet holds some USDT, and I have the seed phrase. (alarm fetch churn bridge exercise tape speak race clerk couch crater letter). What's the best way to send them to Binance?