Відео

The oven cleaner Works better when parts/engine block is hot. Also the oven cleaner needs to sit on the parts for 6-12hrs

Glad my formula bird is a hard top😊.

Floors are in not too bad shape for a T top car .

How do you tighten blades????????? Women friendly?❤

Even though your video is a couple years old it is still the same good information. There is no different way of fixing it than the way you did. I'm glad to see that you put down silicone. Until you pull that out I would not have believed that could have caused problems. Also you hit it out of the park with the gaskets. The reason I came across this today is that tomorrow I'm going out to look at an X5 a 2010 diesel. The amplifier is broken and a modular for the hatchback is not working. I remember a few years ago when I was looking at purchasing another X5 I came across stories about the sunroof. Believe it or not there is a company on Amazon that now sells this little kit that you can use to unclog the tubes. You have the option of doing it with the brush attachment or just the plastic piece that looks just like a weed wacker string. And if I remember it's like $10. I have more than enough weed wacker cord I used the heavier stuff so I don't think it should buckle pushing its way down the tube. I'm also going to blow some air through the line. I figure to set the compressor down to 5 or 10 PSI. I just like you I don't want to blow the tube out and then have to take half the car apart. I most definitely hit the like button and I hit the subscribe button. Almost any video I watch always get the thumbs up if I think the person making the video does know what they are talking about I'm always going to hit the subscribe button. I figure the time you put into making this video for the world at least people should subscribe to your channel. Like another UA-camr says it doesn't cost you anything to hit the like button and subscribe. I hope to see more videos from you. If you know a lot about working on BMWs people will start finding you more quickly. That seems like the hot button since there are a lot of known issues. You did pretty well with that I hope you are still at it. Good things happen to people with patients. One example is there is a person in Pennsylvania that does Porsche videos now. He actually picked it up less than a mile from my house. And we started talking back and forth. When he really got into the engine work and repairs on the Porsche his channel took off. It was about a year maybe two years before he reached the 100,000 mark. I think you have the same potential. Thanks for providing help. David

Great Video and straight to the point. Thx.😊

The answer sir is MoonShine.

I want every color of this sexy car

As A big dodge fan, indeed a nice car for US ! * I remember that back on nfs UG1 (2003)

😂 shit happened to me

I don’t even have a Chevy but I watched this twice

I have a 79 Magnum and got a 6.1 hemi as well to put in it. Is it possible to get some more info on the car?

Picture perfect👍👍👍

why oil for automatic gear goes to Manual?

Hi Whiskey, In trying to replace my radiator I've now seen 10 YT videos, and you are still the best by far. I've bought two replacement rads and both seemed defective to me. Now I'm waiting for number 3! The second came out of the box with one of the ABS heater hose nipples broken clean off. The first came with drain plugs only for the auto transmission connectors, and not the solid plugs as pictured on the web site description. The main reason for my entry here is to caution fellow Corvette DIY mechanics about what I ran into- and was not talked about at all on any of the TEN videos..... THE BIG HOOK AT the bottom of the rad, next to the drain cock. It wraps around the condenser pipe leading to that very vulnerable part!!! In trying to lift out the rad I could feel something VERY solid holding on to the bottom of the rad. In going after taking out the fan assembly I saw the problem.. and had that "Holy SH@T" moment! I was able to carefully lift the pipe clear of the hook- while under the car. After that the rad came out fairly easily. My fear now is after I get everything put back together I may have damaged the condenser pipe or its weld at the bottom of the condenser. If I did it would mean an expensive trip to a real Corvette tech. SO, WATCH OUT FOR THAT HOOK PRIOR TO REMOVING THE RADIATOR !!!

I daily mine

Hell yeah!!! God Bless ya!

Oh yeah American car with dash lights on but gotta love chevys

Man you never see a vette with 150k even a c5 thats badass what miles did you buy it at?

260k on my daily. Maintenance is key

😂 i was sitting here watching thinking he better hammer down after talking. I was not disappointed.

🤜🤛

Shoulda been doin 150!

No point in buying a car just to look pretty. Drive that fuckin thing😂

Yeah…. But your traction control is broken. What pile…. 😂 On a serious note, I know a guy that got a new vehicle because it truck had high miles. 70k……

The anticipation of waiting to hit a high milage mark on one of your sport/muscle cars is something else.

Hell yea, now i want to see a vid of you doing 160

"Cleans Quickly & Easily" . Dead or not . Now u can blow on it it will go away. Shit looks op

Dont know why this even was recommended to me as i havent looked up ahit mopar...but i stayed to hear that ole blg block idle thats a killer car btw

I’ve used bio freeze on wasps before worked like a charm

This is the best video on this job by far! You're right Whiskey, those tabs are very tricky and difficult to see from above. You are the 5th one I've referred to, and the only one that shows the clips at the bottom of the rad, fan shroud, and condenser. Hopefully I'll get her out now. Thank You Much Whiskey, and have a good one! George White Scituate, MA

I thought it said cumout😂😂😂

My grandfather has a C5 50th that still has only 2k on the dash. Took it for a rip last thanksgiving to help break it in a bit 👍

You’ve been waiting for this for a while

My vett is broke 😐

yessir, the way it’s meant to be

Ive actually used carb cleaner as an insect killer for the last 20 years. Truly and honestly works better than any commercial insect killer I've used. Tried them all. Carb cleaner drops bugs faster

I stripped that screw on my 4150 only had a little left holding it on and surprisingly it held 10.6 psi of boost without it flying off

That is a dead wasp nest. There are no wasps in it. Brake clean works as wasp spray tho.

I don't know about bee's. But I sprayed it into that round thing on top of my engine and it worked real good to clean off that varnish.!!! Who would of thought?

Those are not bees, 😅😅😅

The roll cage, gosh I want. By the way… can you call a 65 a ‘Cuda’? Cause I want a nickname for my car, but someone confused me and I think Cuda is a style of barracuda??

👍😎

showing off like this attracts black people (you have dodge products)

You woke the spiders up. Now they’re going to start walking around.

Just seeing the air filter jump tells me you really need new engine mounts lol

None driven on salted roads

I had a white Neon, such a fun car

My mom's 03 neon sxt is a treasure to me that car will never be sold nor will it ever be off the toad I'm actually debating on giving it the srt4 treatment

Where abouts in PA u from?