TheMinutiaeEffect
TheMinutiaeEffect
  • 11
  • 115 100
Thompson Walking Foot DIY Posi-Pin Clutch
This video covers adding a posi-pin like mechanism to your Thompson walking foot machine. This mechanically locks the sewing wheel (and motor) to the machine shaft and prevents slipping when sewing heavier/thicker materials.
Переглядів: 1 365

Відео

Thompson Walking Foot Sewing Machine Repair
Переглядів 19 тис.5 років тому
This video covers the various aspects of repairing an old Thompson walking foot sewing machine.
Shorten your Klymit Sleeping Pad (Models: V Ultralight SL & Static V)
Переглядів 2,6 тис.7 років тому
Shorten your Klymit sleeping pad and reduce its weight by a few ounces. The whole process can be done in 5-10 minutes with a regular household iron. The Klymit V Ultralight SL Model weighs 8.7oz after shortening to 5'6" Klymit Static V model weighs 15.5oz after shortening to 5'6"
MYOG - UL Fly Fishing Pack
Переглядів 1,7 тис.7 років тому
This is a UL Fly pack I made today for an upcoming backpacking trip. Took about 2 hours to make. Weighs 1.9 OZ empty & 7.6 OZ loaded.
Loading your new fly pack..a beginners guide to fly fishing tools & pack mods
Переглядів 75 тис.8 років тому
A fly fishing gear and tool guide for a long day of fishing on the river. With an in-depth review of the Fishpond Blueriver lumbar pack and a how-to for some of the modifications i've made to it so far. This should cover all the gear you need for fishing, except for the rods, reels, and fly line. Equipment List: 1. fishpond blueriver lumbar pack - amazon- www.amazon.com/FISHPOND-BLUE-RIVER-CHES...
Fishpond Blue River Lumbar Pack Review
Переглядів 7 тис.8 років тому
A quick review of the fishpond blue river lumbar pack, loaded up and ready for fishing.
Headlamp Review - Black Diamond Spot versus Petzl Zipka Plus 2 (& Zipka)
Переглядів 1,7 тис.8 років тому
An in-depth review of 2 models of headlamps; Black Diamond Spot & Perzl Zipka Plus 2. As well as a primer on how to use them and what features to look out for. These are the two models of headlamps I recommend, one is band-less and lightweight, the other fully featured and a bit heavier.
Arduino Control Box - External Prototyping Switch Box
Переглядів 648 років тому
I made this external switch box to speed up prototyping of my arduino breadboard projects. Its made of a Hammond Manufacturing project enclosure (1591BSBK ) and several different types of switches and potentiometers, all of which I got off of amazon.
DIY Helping Hands with Panavise and Loc-lines
Переглядів 2,1 тис.8 років тому
A quick DIY project if you need helping hands for soldering. Made with a panavise model 201 and some loc-line hose assembly kits. The special sauce here is the 7/16" hex nuts used to mount the loc-lines. Great for arduino circuits and soldering wires together.
Financial App Reviews - Robinhood, Betterment, Qapital, Level and Digit
Переглядів 3,9 тис.8 років тому
A quick high level overview of a few iOS financial apps that I use and recommend for saving and managing your money. Robinhood, Betterment, Qapital, Level and Digit are shown and reviewed. They each provide a unique feature/service and there is little overlap when used together.
Hammond Project Boxes Review
Переглядів 8568 років тому
In this video we review 7 models of the Hammond Project boxes. These boxes are great for DIY and Arduino projects and can easily be found on Amazon. Finding the right sizes can be difficult at times and a basic comparison of sizes can be found in this video. Times for specific models can be found below: 1591BSBK - 02:01 1591CSBK - 05:24 1591DSBK - 00:19 1591ESBK - 02:48 1591GSBK - 04:36 1591SSB...

КОМЕНТАРІ

  • @stephenaucoin6587
    @stephenaucoin6587 3 місяці тому

    Thanks for this Brotha Man....I got this same machine off of my Mom in Law and will be calibrating it for backpack straps, hip belts, etc.....Your time and thorough explanation was just what I needed....

  • @FractalWorkshop
    @FractalWorkshop 5 місяців тому

    Hey, I just got a Thompson PW-400, the motor and wheel spins when clutch isn't engaged, but when I engage the clutch, the machine seems to be locked up, motor doesn't move anything inside. Any idea what the first thing to check would be?

  • @wacoprimerabiblestudy9978
    @wacoprimerabiblestudy9978 5 місяців тому

    @drsfloa Great video. I am having issues with thread tension on this machine. I have adjusted bobbin set screw and top thread tension knob dozens of times and still lower thread is loose.

  • @coalbuster
    @coalbuster 6 місяців тому

    Thank you for this really well done video tutorial. I recently picked up a Thompson PW 103-A-GBP, the predecessor of this machine, and your video helped me adjust it perfectly.

  • @rndea100
    @rndea100 6 місяців тому

    can you add the walking foot parts to a regular machine ???

  • @nowstarthere1032
    @nowstarthere1032 7 місяців тому

    Thank You for all the time and effort that you put into this excellent Tutorial. Very Professional.

  • @pauldrake771
    @pauldrake771 8 місяців тому

    Excellent photography and nicely paced. Thankyou so much.

  • @janebentham738
    @janebentham738 10 місяців тому

    I bought a PW201 with a broken bobbin winder. Sailrite does not carry the part. I have tried the Sailrite LZ part from Sailrite but it isn't close. Has anyone found a retrofit or repair for the broken bobbin winder?

  • @mchaves7663
    @mchaves7663 10 місяців тому

    Excellent video. I was looking for something like this. Just a question, sailrite managed to increase stitch length to 6mm? Would you know which parts would be replaced to achieve that?

  • @jjsoundguy
    @jjsoundguy Рік тому

    One comment I would like to make. The small chrome screw-on piece on the side cover that is located about 7:00 o'clock from your thread tension adjuster is 180 degrees reversed. It is supposed to hook back around to the main vertical plate. The function is to prevent the cover from moving when the foot up/tension release lever is operated. The cover is held on by two only screws and this is a third fastener to stop side plate movement. I realize it looks like a thread guide to "who knows where" but it has a real function. Again, thank you for a wonderfully useful video. And nice camera work and editing. Nice clear audio too. Do you still have that Thompson PW-201?

  • @jjsoundguy
    @jjsoundguy Рік тому

    Very useful video. Thank you. I just thrifted one of these machines and I am sure it will need some TLC.

  • @adolforosado
    @adolforosado Рік тому

    below is the secret video y'all are looking for...

  • @newnormal1841
    @newnormal1841 Рік тому

    🤺💐

  • @reginabuell7220
    @reginabuell7220 Рік тому

    Wonderful and so much help

  • @reginabuell7220
    @reginabuell7220 Рік тому

    Big help

  • @mcavila27
    @mcavila27 Рік тому

    We just acquired a Thompson PW 201 and this has been great to get acquainted with it. Thank you for this video.

    • @jjsoundguy
      @jjsoundguy Рік тому

      Can you tell me what needle size these machine takes? I am getting conflicting info. TYVM

  • @joshuarumsey2302
    @joshuarumsey2302 Рік тому

    My Thompson has the tensioners on the front like the Sailrite machines have. Very helpful video.

  • @ScooterMLS1960
    @ScooterMLS1960 Рік тому

    I just picked up a Thompson PW301 at a garage sale. It was cheap because they said the timing is off. I think it has all the problems you identified plus another couple.

  • @karenkspitzrdesigns
    @karenkspitzrdesigns Рік тому

    Do the Thompson machines need to be cooled with a pan of oil underneath?

  • @josephcalvosa8272
    @josephcalvosa8272 Рік тому

    Thank you so much . I have searched this so much and you are correct nothing that demonstrates the walking mechanism

  • @lindaclark2771
    @lindaclark2771 Рік тому

    Looking for a bobbin winder....Sailrite sent me the wrong one. They said it would work but its to big.

  • @vilmaanderson4660
    @vilmaanderson4660 Рік тому

    Could you go deeper how to make the machine to turn.? Thanks.

  • @vilmaanderson4660
    @vilmaanderson4660 Рік тому

    Thank you. Do you have a video on how to lube it.

  • @chrispfeifer7950
    @chrispfeifer7950 Рік тому

    Great video! I’ve referenced it several times to get my 201 dialed in. I haven’t found anything else on line as thorough. Thank you.

  • @sugarluv2
    @sugarluv2 Рік тому

    What bobbins should I buy for this machine?

  • @54Howie
    @54Howie 2 роки тому

    Voice over would have been nice

  • @willywinket
    @willywinket 2 роки тому

    My friend gave me one of these machines. He used to repair sewing machines professionally and got it as a donation from a customer. He got it working pretty well. I had to jury rig the tensioner with half side of a pair of tweezers for a spring but otherwise that’s it. Between the two of us we brought it back from the dead. It sews almost anything. Seatbelts, backpacks, heavy cotton. I love it! Thanks for this video. May need to refer to it later on.

  • @stanhenline3845
    @stanhenline3845 2 роки тому

    Those gloves will kill a trout, and to much junk

    • @DB-qm4jx
      @DB-qm4jx 2 роки тому

      lol, OJ gloves ?

    • @DB-qm4jx
      @DB-qm4jx 2 роки тому

      and more "junk" more fiddling= more fun!!

  • @alleonhard261
    @alleonhard261 2 роки тому

    Nice info. and very detailed. I bought a Thompson years ago and it is still in the box, I never used it yet. I always wanted to do upholstery stuff. I'm not even sure what model it is. I'll have to check it and see which one. I remember it was expensive at the time.

  • @bigrickshaberdashery2759
    @bigrickshaberdashery2759 2 роки тому

    AWESOME, GREAT JOB love mine and it still works. Mine has the bobbin arm that was broken when I got it, just pre-load bobbins but I love to find the part.

  • @powerfullaudmarcus2455
    @powerfullaudmarcus2455 2 роки тому

    Thanks for an Awesome Job !

  • @peterhirst9844
    @peterhirst9844 2 роки тому

    Heat setting on the iron?

  • @dannyingamells6642
    @dannyingamells6642 2 роки тому

    Dude...that's arranging a fly pack musica!!!

  • @victormartinsarmiento5298
    @victormartinsarmiento5298 2 роки тому

    Best video ever about walking foot, thanks so much.

  • @fiddler2u
    @fiddler2u 2 роки тому

    This is beyond excellent. Thank you.

  • @obkf-too
    @obkf-too 2 роки тому

    First of all thanks for the great video. This machine is exactly a Singer 15k with modifications lol, I was looking for details on how they work so maybe I could transform my singer into one (I don't have access to these machines in my country).

  • @georgemillar5105
    @georgemillar5105 2 роки тому

    I was given a Thompson mini walking foot PW 103Aé Where could I get a manual or more information. Great video informative and easy to follow.

  • @pn4775
    @pn4775 3 роки тому

    thank you for this excellent video, i tried to go on the internet to find a service manual and could not figure out a site to access a manual. i just came across your video and it gives me all the information i was looking for. i really appreciate the information given

  • @jacksonpope1086
    @jacksonpope1086 3 роки тому

    Hello: I just ran across this video tonight which is a wonder that I hadn't seen it before. I have a Thompson PW 200 which I assume is very similar to the 201. I have not been able to find any guidance of any sort on this machine so this info from you is a boon. I have had mine for a couple of years and use it moderately. Very few issues but I am so glad to know how to make the adjustments you show. I am sure I will come back to reference this video from time to time. Thank you!

  • @toomanyhobbies2011
    @toomanyhobbies2011 3 роки тому

    Thank you for this outstanding video. It covers a multitude of sins (uh, Thompson clones) that many of us have. I got lucky because my REX came fully functional. The drive belt was misaligned, so some time bending the bracket (a different design than your Thompson) to change the position and angle of the idler pulley took care of that. Next thing is to move the servo from my Singer machine to the REX. The Singer is awesome with the servo addition, but it doesn't have a walking foot nor does it use the large needles of the REX.

  • @swordfish1120
    @swordfish1120 3 роки тому

    Very good vid. Great deal on this machine. Have you compared this to a Sailrite machine? Do you feel both are pretty much the same machine?

  • @boutch050
    @boutch050 3 роки тому

    Thank you man I learned a lot from you

  • @rcmoot
    @rcmoot 3 роки тому

    Do a video on inner and outer foot timing and heights.

  • @bethrider9
    @bethrider9 3 роки тому

    Hi there I’m hoping someone can answer this question. I was gifted Thomson mini walking foot PW 103A . The people who gave it to me thought I could use this for quilting? Is this an adequate machine to quilt with?

    • @theminutiaeeffect3504
      @theminutiaeeffect3504 3 роки тому

      Hi Beth! I'm not a quilter, but I did a quick google search and it looks like a walking foot is useful for quilting. Assuming the machine you received is in good working order, you should be good to go. If it needs to be repaired, you might find it difficult to find someone that can do that. Before you start any projects I would do some basic sewing on the machine and make sure the feeding, tension adjustment and stitch lengths are working as expected. Search youtube for walking foot quilting videos there are quite a few. Good luck!

  • @markscachetti6575
    @markscachetti6575 3 роки тому

    Thank you excellent video, I'm new to fly fishing and the gear set up. This was the best video I've seen so far, and I've watched a ton.

  • @rcmoot
    @rcmoot 3 роки тому

    You have the only and best video on this. I have a rex z and have had some problems. Your very informative. I need to know one thing on mine , I noticed and have no clue if it should be this way. My e-mail -gotahabit965@gmail.com. Please send me a message on how to contact you personally. Thanks

  • @markaldridge8755
    @markaldridge8755 3 роки тому

    Nice video. Gave a lot of great ideas. What is the small bottle you insert on the outside of the bag? I’m a spin casting fisherman and want to rig bag for that. Would like to find small bottles like that to store hooks.

    • @theminutiaeeffect3504
      @theminutiaeeffect3504 3 роки тому

      Thank you! It's a flip top prescription pill bottle. They sell them on amazon/ebay. It has dry fly powder in it and is used to dry water logged flies so that they float again. Fish on!

    • @markaldridge8755
      @markaldridge8755 3 роки тому

      @@theminutiaeeffect3504 I thought that was what it looked like. I have some small bottles like that but they don’t fit. Hate to bug you with it but don have a link?

  • @dannyrusso8279
    @dannyrusso8279 3 роки тому

    This is a great video. Thanks for posting it. It looks like I can apply this information to use on my Sailrite clone. I had a few hiccups when I first got it, but after some break-in it's working well now. With this video as a guide I'm confident in doing any needed adjustments in the future.

  • @needsmoreisolation8568
    @needsmoreisolation8568 3 роки тому

    the larger wheel they sell im not that big of a fan of because with like a 2.5mm stich my small wheel can zip through a straight stich. the carbon pile foot pedal makes gearing down not as needed compared to an "electronic" pedal that pulses the motor