Відео

Why not use silicone grease on those orings? Are we sure dishwashing detergent is okay?

Hi Kevin I’m a little bit in the dark about when you tap the weights on the crank what are you listening for if it’s bad, if it’s bad what would it mean like would it be bent or cracked? I liked watching you handle the new bearings my dad had me so scared to touch them and I didn’t understand how do you install them or measure them if you can’t touch them 😂😂😂. And how many thousands do you think you cut out of the ridge? Your the first person to explain “crush “ honestly Kevin I am 53 right now and worked with engine quite a bit so thanks for that tip oh and same with putting the rod in the vise that makes perfect sense to me because I am a crane operator and I always had to explain to my customers that you can’t side load the crane boom no pulling at all or I’ll be on the 6:00 news 😂😂 Oh one more thing where did you get the small block Ford manual? I enjoy wrenching with you when I can!😀🇨🇦

Hi. I know this video is 3 years old, but would you PLEASE tell me how you got the PTO Shaft Safety Shield removed on the Kubota Snowblower shaft? I see it's a Weasler Shield and so is mine. But I cannot figure out how to remove the shield.. So far, Weasler has been no help.

Just learned a lot about these cool tractors. Turns out I bought a 2n . It came with a big JD brush hog and I got a blade for it although it sounds like that might have been a mistake..... Oh well I will just have to find an 8n now LOL

Hey Kevin, I’d say those wheels look pretty good on the old convertible and done on the cheap too! Ive never come across those balancing beads before, I wonder how long they’d last? Thanks for the video, always entertaining! Have a great week!

Hey Kevin, Was commenting on your B and D video from a long while back. Have been doing more research and started looking into Sioux stuff and came across this. Do you still love it? Like you say the B and D was for a garage to do the odd job and the Sioux is for a machine shop. It seems to me the Sioux is way better quality? I am eyeing up a model 645B and a model 2001 locally. I think I like the older 645 but the 2001 is a lot newer.

That was very educational for me like you said it’s a lot to take in but some of it will hopefully stick to my brain 😀🇨🇦

Hey Kevin I learned a lot from you today and I’m ready to learn more about the Ford blocks and cranks and I would appreciate another video as you suggested about Ford blocks and I am glad you were able to help the guy with the crank and rods for his engine I bet he’s very happy 😀🇨🇦

That thing is beautiful. I'm going to find myself one. Thank's for sharing. I had a new Yam outboard I rebuilt and had to use one of these to trim the stem to get valve clearance. New cam buckets were 50$ US a piece X 16. So we trimmed the stems to get clearance for free.

New tank looks good. Off shore is what you pay for, sometimes good and sometimes not so good. Keeps us on our toes. Thanks for the video.

Hello, can you tell me the size of the belt? Where do you buy it? 2 small

G day Kevin So what was wrong with old ones? I kinda think steel isn.t as strong. I watch videos from states , there is always cheaper asian new machines for sale Ths good luck

I just bought a 1968 Galaxie 500 xl and probably could use help with your videos

I had a 1946 ford ferguson 9n

Great video, Kevin. Would like to see the engine repaired and what you find when you take it apart. Hopefully it wont be a real pricey job for the owner.

Mufflers are discontinued. Trans has been swapped yours would have had you plug on side. Fenders are correct. Late ‘39 early ‘40 had 3 rivets instead of 5 rivets on top of fenders. Loren Booth is repopping the heat shield along with snap in hood hatch. Since you are changing out the generator and VR if you’re considering selling it would be nice interesting I buy it. It is a nice ‘40 you have there

Hey Kevin I thought I would just comment on what I have done in the past with an oil burner , you could do an oil change and put a # 50 grade oil or a #30 with an STP or give her 15/40 with an additive you know what ever you think it can handle and then wait until spring or summer and put a load on it and make her sweat it wouldn’t be a really expensive experiment and maybe it might loosen up any loose rings and burn out some carbon just a suggestion. I just wanted to tell you to when I was your my Dad bought a 8N and it didn’t have sleeves and boy what a difference it had a lot more power I didn’t think it would make that much difference but it was a good old machine 😀🇨🇦

Hi Kevin, convince the owner that the tractor needs a total refurbishment.

Glad to see another great tractor brought back to life. Thanks for sharing Kevin.

At 21 minutes I use a gasket scraper to remove the seat.

For your SAFETY install a battery cover and never fuel while running. The 2N my dad bought was in a fire where the farmer set the tractor on fire by toughing the fueling nozzle to the battery or spilled some fuel over the running engine. He set the wheels out for rollover safety when racing with STEP-UP.

Hey Kevin, I learn so much watching you, love the old tractor videos, looking forward to this series! Have a great week!

Love the videos

Early 1944 2Ns had the I-beam style radius arms. My 1944 2N has the I-beam arms. It was mid 1944 that Ford went with the oval shape arms. Also, all 2Ns had the access holes in the doglegs to get to the grille bolts. 9Ns did not have the access holes.

If you are interested in selling the 6 loop 32 rim. Or if you would like to swap it for a 32 hatrim please let me know. Loren Booth is repopping the snap in cover

Thank you so much for doing these Kinetico softener repair videos. It inspired me to work on my own 2030s softener that looks just like yours. I have my fingers crossed that I resolved my "won't finish regen cycle and keeps backwashing" problem. I wish there was more support from Kinetico about how to work on these. More people might buy their products if they did.

Good job. I always liked the black fence over the bare metal. Your dogs seem to like their new play area.

I would have also cemented the center post of each run, I have seen them lay over in the wind, your little 24" deep is NOT enough.

Thanks for more info

I’m pretty sure the Supertronic is a musical horn. A bunch of preloaded horn songs to choose from to play. La cucaracha, Land of Dixie (dukes of hazzard horn) Happy birthday etc.

I am Doug and l have a 19 inch rim with no hand holds. l would like to trade for air intake tube for a TEA

Hey Kevin, I’d say that was quite the score for $500, surprising almost everything still works on it and the interior looks in really great shape too! Always enjoy watching the goings on at the Claremont Garage! Have a great week Kevin!

"It looks like it's been in a transmission shop" Karl probably put the transmission in it.

Nice to have close friends to pass on old iron. You look like a proud papa with a newborn. Great video, Kevin.Curious to know what the plug in the intake manifold is for?

Great video, can you do a update on the chipper and tractor used.

I'm Gord's daughter! Thank you so much for helping my Dad with his tractor over the years. I know how much he loves that tractor, and how much he has appreciated your help over the years. It is so fitting that he has passed it into your capable hands for the future. Thank you again!

Thanks for taking care of this unit for Gord. He has obviously chosen the right caretaker!

Congrats Kevin, I’m sure Gord knows it will be well taken care of! Thanks for the video Kevin!

Congrats on your new old Ferguson. Is your barn full yet or its there room for more?

I have one of those, I think mine is a 49, TO20. It currently isn't running 😢

I just picked up a 53 jubilee

Thank you for your videos ! I have learned so much!

I love all your videos was wondering if you can make a video response to setting up and installing a side mount distributor I have timing marks on two sides of the flywheel is with the number one cylinder at the top of the powerstroke I have spark but it won't start so I don't know if I'm missing something

You are a good friend Kevin

When we purchased our home it hs a kenetico water softner. I have learned alot from your videos. Thank you!

G day Kevin Interesting! Yes my starter went on 2013 gmc. I wash part of motor, & then it would not start. I thought something wet or blowen off. Anyways new starter, 2-3 wks acted same way, new starter. Other yr alternator went garage put new one one. less than 1 yr it went wrong, good thing they had computer show it new one free. Ths

Great job on your video most guys dont know all of the stuff you covered , im a ford guy and its hard to remember all this stuff and when you forget some thing you can have a mess on your hands i run the 302 and they have been the best little motor , we've gone 9 s in the quarter mile with stock bottom end and my ported e 7 heads and a dual plane intake the car is on UA-cam if you'd like to check it out it's the green gangster with Adam grover grover boys racing, I enjoyed your video thanks for sharing all the great information

Very informative, thank you

Great tractor. Sounds pretty good. Will be waiting for the next video. As always, thanks for sharing.

I always learn a few things on each of your videos. Thanks for posting them. And that is a nice 9N.