Відео

No, unfortunately, there does not seem to be a way to keep it on. Thank you for watching

@@Boopolo thank you!

Hi Ned. Thank you for your support, and thank you for watching

Different establishments have different rules. Most manuals say two fingers for the radial on your wrist and three fingers for the carotid on the neck. I can take a pulse with one, two, or three. Thank you for watching

This one is 3 liters. They come in many sizes from 1.8L to 30L. Thank you for watching

You must turn your paper as explained in the video

Glad you enjoyed it! Thank you for watching

Thank you Charmaine

You are welcome. Thank you for watching

Not at this time. However, I will be doing a Deutsch DT crimping video next week (solid bar). Thank you for watching

Thank you for watching

Not that I am aware of. You can measure inductance with a signal generator and an oscilloscope, or a a signal generator and two multimeters. You will also need a non-inductance resistor of known value. Both methods require a lot of maths. If you want to test all but the smaller μH inductors, a cheap component tester will work. They typically will measure 0.1mh and above

@Boopolo My old Wavetek DM27XT had that feature. It could test inductance from 2 mH up to 20H range, 1uH resolution. Its precision was only 5%, but still very useful. I'm surprised that almost no multimeter today offers this.

Hi John. One of my old ones has a component-checking feature, but the range is limited for inductance. If I was doing a lot of speaker crossover building I would buy an LCR meter. I found this highly-rated one here on Amazon with 10% discount token (.com only, I think) geni.us/LCRmeter There is also a best-selling budget one here geni.us/LCRmeter2 that is sold around the world on Amazon. It is manual ranging and covers between 0.1µH - 20H. It also has a discount token. All links are affiliate and through genius

I recommend daily. Thank you for watching

You are welcome. Thank you for watching

Yes you can. Thank you for watching

@@Boopolo Thank you for the reply!

Glad you enjoyed it. Thank you for watching

The 5400 is on sale at the moment here: geni.us/Norelco5400 . Instead, the newer 3900 with USB charging is more compact and comes with a stand and Travel pouch: geni.us/Norelco3900 Thank you for watching

You're welcome! Thank you for watching

You're welcome, and thank you for watching

You are welcome, and thank you for watching

Please elaborate. Do you mean the right size for double-sided printing? Please put in the time code (00:00)

When bought approx. 590mm including the rubber inserts. I cut off approx. 12mm so it could work with my DIY stand. Thank you for watching

Yes. But non-hollowed TORX The Amazon description on my link is a bit misleading. Thank you for watching

@@Boopolo Thanks!

There are several different types of Night Owl cameras. It is just a brand. Thank you for watching

Yes. A good new alkaline battery will be about 1.55V to 1.6V. If 1.35v I will replace. Thank you for watching

Yes. You use the QR code to download the app

Hope you like it! Thank you for watching

I am glad it helped you. Thank you for watching

You cannot pause it, but if you press 'stop' it will pause for a few minutes. If you do not continue within those few minutes it will reset

I am glad it was of help to you. Thank you for watching

I usually use this one in the shower. Thank you for watching

I did mention that in the video. Thank you for watching

Wow. That sounds great. Thank you for watching

@@Boopolo I was having drops in kill zone rpcs3 10k resolution with my 12400, and my fps would drop to 40s and back to 60. With my 12700, I hardly get any drops using the same resolution. Timespliters dolphin 8k I got drops using 12400. I no longer get those using the 12700. LFD2 would give me drops to the 60s from 120fps using multiple graphic mods using a 3080 RTX/12400. I no longer get those big drops with the 12700. This card is a monster. I didn't expect it to stabilize my FPs so much, but I was hoping it did.

Glad you like them! I record in 4k so almost all my thumbnails are from the recorded footage. Thank you for watching and supporting this channel

3M states that they are good for 5 years after manufacture. Thank you for watching

Not that I am aware of. You can check from the link I gave in the description. Thank you for watching

Enjoy it. It has had 6 updates in 2 weeks. Best set auto updates. I am still learning. Thank you for watching.

Count the grams from your scales, and count the dripping seconds at the same time. Then you have your answer. If too slow, grind coarser, and if too slow grind finer. Thank you for watching

@@Boopolo I am asking "what is there flow rate" of the KETTLE that you are reviewing.

Almost all these kettles have a similar flow rate that is unaffected by the amount of liquid in them. This is because the spout comes from the bottom. There are a few with adjustable flow rates like the KitchenAid one. I have just tested this MHW one for you and it took 25 seconds for 250 ml. That means the flow rate is 10ml per second

Nobody ever said that it scans a double-sided document automatically, and very few machines do. If it did, it would have to be a much larger machine and a lot more money. I have mine for two years and love it. Thank you for watching.

I beg to differ. The built-in Breville grinder is pretty good and better than many stand-alone machines. Thank you for watching

Glad you enjoyed it! Thank you for watching

Sounds like your settings. This has been my main monitor for a year now. Thank you for watching

Yes of course. Thank you for watching

Glad it was helpful! Thank you for watching