Відео

Raise a support ticket with them.

Even with Official Windows installation other than the one that is sent by GPD?

Not at all. Only issue Was a stupid mistake of mine not putting the washer between the elastomers and the spring causing it to crack after few months. Always put large washers which are provided between elastomers and spring if you use spring.

@fk_tech Thank you for the answer. Maybe do a long term review of the pedals cause there isnt one on youtube. People like me might be interested in watching it especially with the low price of the pedals now 🙂 Keep it up 👍

Thanks. That's a good idea. SimRuito have sent pedal samples to pro racers and they're using it daily. It will be better for them to do long term review.

Thank you.

Good to hear. Enjoy

AMD Ryzen 9 8745HS, 7600M XTX egpu and 32gb ram. I have shown it in the video. Please verify it in the video cause I don't remember the cpu model accurately.

If you follow the guide for steam deck with c5 you should get everything working. You can join in sim racing chat on matrix to get help. I can help you there or join cammus discord.

No initially i had it on ultra setting but switched it to medium to get 50fps. At ultra you will get around 20 -25 fps but at high you can get between 30-40fps

github.com/JacKeTUs/linux-steering-wheels If your wheel model is supported than you can use the driver repo from this link. The whole process will be same just the driver repo will change.

This issue was related to the game not able to access the wheel correctly. Deleting the controller profile and reducing the wheel angle helped with reconfiguring the wheel. Thanks for the comment.

@ just an fyi, on my Cammus c12 I couldn’t get the speedometer and the led metter to work. Turns out I needed to go to SYSTEM settings and enable “project cars 2” on the 2 sections that give you this option and also in the middle section turn it on and set it to 1. Maybe just maybe your wheel would have worked by enabling those things too, but glad to hear you sorted out.

Wheel config is different and telemetry is different. Thanks for the information though..

Which os are you using? Open track should work on windows but on Linux you need to launch it with wine or proton prefix

Increases the sensitivity of the sensor. If you increase it to max then pedal will be very sensitive to the smallest amount of load.

I asked cammus to send me badges 😂

Can buy badge direct on their site. Got a link for the quick release??

Details uploaded in description Beware there is a slight play in the qr which is can be felt only during hard turns For badge its not my priority, Instead I will buy more wheels :D If cammus wants to showcase their brand they can send me badges :D

@ you deserve them.

Base is Next Level F-GT Lite and the wheel rotation can be due to fast forward. Other than that its perfect..

Yes. I used a software from github. github.com/kamaaina/macropad_tool

@ im struggeling to understand it, could you make a tutorial on this please? 🙏

Glad you liked it!

I am based in Middle East . very happy with Cammus c12. Best value for money. No wheel comes close to c12 in this price range

Yeayy !!! Cammus C12 Racers :D

Then it should just work fine using cammus app.

@ ya I use the CAMMUS app for windows and the CAMMUS app for my iPhone 13

Thank you, I'm trying my best.

Glad you're enjoying it!

Welcome to Sim Racing using Cammus products LOL.

Have fun. If you want to race with rookies than join in real rookie racing community.

I did!

Wait you received you wheel within few days ?

No I have been using it for one day then

Now I have been using it for two

I have been playing acc. And Beamng

I was thinking of using a square 😂

What else ?

Oh the gear for the Cammus c12

Happy Birthday! I hope you enjoy your new wheel! Awesome. Good luck

Thank you!

Yes still a rookie 😔

Let me see if I can recall what I did. Mostly just enable the usb-port to stay awake when host sleeps but 8bitdo have a new firmware for 3-mode xbox controller which can do the same out of the box without any tweak.

@@fk_tech Doesn't seem to work for mine with the dongle. Do you remember how you set up USB wake?

You need to look at you windows setup. Software works perfectly fine for many users on windows 11. Please join cammus discord to get help from their support and other users on the channel.

Thank you.

@ your welcome

I don't think simjack pedals will work on SimRuito software. You can try and check. I've not tried as i don't have sim jack..

Not sure what you mean by that. It have worked as it is suppose to on my use case. If you have problem than you can contact their support on their website.

Any time

DIY rumble motor using xbox controller rumble motor and Arduino uno with motor shield board. I have a youtube short explaing it. Do check it out.

www.amazon.com/Beelink-SER5-5560U-500GB-Computer/dp/B0B3WYVB2D 5560u cpu and 16gb ram.

Hello Sudo pacman -syu linux-neptune-61-headers base-devil git dkms There is a - in base-devel and its not devil :D Please follow the commands from here sl.fkardame.com/sd-cammus

What is the error?

Please check with Cammus Support in their discord. They will reply tomorrow.

Only those which have driver support. github.com/JacKeTUs/linux-steering-wheels List here

@ thank you

​@@fk_techIf it's on the list, is it plug and play? Likr logitech g29?

They say it will be out by December 2024. New heat dissipation designed. Lets see.

Backlight is in the firmware you need to press Fn key and space.

@@fk_tech I got tired of pressing these buttons after every computer boot to turn it off. Is it possible to make the backlight off initially and not on? What program can I use to turn off the backlight?

You need to check with GPD support. IDK if there is anyway to turn it off as default.

@@fk_tech I contacted them, but they don't answer me. Maybe you know a program or application that completely turns off the keyboard backlight so that it no longer turns on?

I don't think it is possible from a user space application. it is controlled at firmware level. Wait for them to come back to work as it is weekend.

Yes it came do medium graphics settings at 1080p resolution and hold around 40-60fps.

Yes this is on 780m integrated gpu.

I only use windows for testing and it works almost the same. My primary devices are linux only..

@@fk_tech testei ontem o dirt rally 2.0, funcionou igual tanto no Windows como no Linux

Multiple reasons. It will always go in dfu as it is hardware based. it is just not detected. Move to discord to discuss this.

​@@fk_techCan you help me with that please I have the same problem!

why don't you join Cammus Discord or Forum? Cammus Discord discord.gg/G23jJsHN Forum: forum.cammus.com/

Have you tried the steps mentioned in this video? I think Cammus have hardware level dfu mode so you should be able to put it in dfu mode and flash it manually using these steps, unless they used software level dfu which you override by wrong bootloader. Join in cammus discord or forum to discuss further. If you can reach its uart then maybe we can find a solution.

@@fk_tech I didn't try it yet but I prefer to fix my Cammus software if possible. I think it should be possible to reinstall the driver in device manager after the device is put into DFU mode if I can find the right driver file. I am a little worried about messing things up further though. If I reboot the wheel when in DFU mode will it return to normal mode? I am on the Cammus discord and I didn't see any answer for this but I can ask the question there too.

Cammus Discord discord.gg/G23jJsHN

Thanks. I will try these during the weekend session and give you a shoutout ;) LFM have changed the track to Barcelona to qualify for the License

I have not been following up on what have changed on the new bootloader of the android version. This is very difficult to maintain when vendors keep changing bootloader function while I have also moved to mainline uboot for amlogic devices. Maybe you can post on manjaro forum.