Відео

But does it have any pockets on the inside??

춘잣!

Moong Tang - E

thanks Luke.

I want to get a pair of Marker Griffon demo bindings for my new Nordica Enforcer 104. Would the best fit likely be a 100mm or 110mm brake ??? Thx

I want to get a pair of Marker Griffon demo bindings for my new Nordica Enforcer 104. Would the best fit likely be a 100mm or 110mm brake ??? Thx

Would have been very helpful if you MOVED the camera so the viewer could SEE the heel piece “lines”.

Thanks for the info. The video was really helpful!

Really useful video. Thank you for posting.

Part of the foward pressurent adjustment is to check if the heel piece swivels with the binding engaged. You grab the heel piece and see if you can easily rotate it. Also the indicator being just past the tabs is considered okay. These binding take some attention to get just right.

how do you adjust the toe height on these bindings?

Great explanation of all important settings, thank you! Clear voice, quick and to the point, good cut, subtitles, no ads, ... what else could we need?

Skiing ability and skier type are not the same. DIN is only concerned with skier type, not skier ability.

*promosm* 🙈

Does it matter how tight the heel arms are screwed in? Mine are almost fully screwed in but the foward pressure indicator is correct

When the screw is like you said for forward pressure, it’s impossible for me to pu the shoe because the length of the fixation is too small compared to the one of my boots

Hi, a question. Regarding the pressure indicator - is it important that the black line is in the center of the white area, or can it also be slightly left or right of center? Thank you

On mine the toe piece DIN setting appears to change slightly when the boot is secured. Do I want to match the DIN settings with the boot secured in or not?

Luuk bedankt pik

Thanks, helpful video 🤙🏼

Hi, how about moving the bindings forwards/backwards? For example can you ride 325 mm boot length on setting 335/315 which is by math the same length? So by doing that the binding would be 5 mm forward. Is this possible?

Top, super duidelijk. 👌 Veer onbelast wegzetten na het seizoen?

Sorry, you forgot to adjust the vertical release DIN of the heel piece!

Thanks. Very helpful

If your boot length is 305, why did you set the numbers 305 and 310 on the binding?

What numbers on the sole length would you use if you boots were not a 'round' number. For example 306mm?

How to adjust the AFD?

Great video thank you 🙏

The lever on mine goes up but the binding wont adjust at all, am i doing something wrong? Seems like it should be pretty simple.

Wierd, I can get any gap on my grip walks on the afd.

What about heel length adjustment? How is it done? thx

hi, could you share how to adjust the look nx binding? Thanks!

Great Video! I have Tyrolia Attack Gw bindings on my K2 Reckoner 102 and the shop set my bindings too far apart - to the point where adjusting the back binding forward isn't enough. Is it possible to remount these bindings? Thanks!

super helpful and easy to do once you explained it!!!

Thanks!

Great video. Straightforwardly helpful.

Ik heb een vraagje: Hoe worden de Marker MXC 12 TC Bindingen van een K2 AMP 80XTi Ski evo 2014 verwijdert?

Question: My binding is a Salomon X12 that looks like the video. It has the same AFD (black) like yours BUT the access cover to the setting faces the rear of the boot and nowhere does it say "GripWalk" on the binding. I was told that some of these bindings did not have the GripWalk logo during certain years and are still compatible. The only difference between yours and mine is no GripWalk logo and that cover 'press button' is facing the rear with a slightly different cover shape. Thoughts?

If you read a binding manufacturers shop technical manual they actually offer a -1 skier type and +3 skier type. After properly adjusting the boot to binding and setting the proper DIN every manufacturer recommends performing a release check with a certified torque measurement device. The reason is that the boot and binding must function as a system. The boot sole that contacts the binding can alter the actual release force necessary to release the boot from the binding. Just because you set your binding to your recommended number doesn’t mean that it will actually release within the recommended range. By measuring the actual force required with a torque wrench the binding spring can be adjusted to the proper range if necessary. One of the first steps in a test is to visually inspect the boot sole for wear and make sure it’s dimensions are within standards. The new Grip Walk soles are not compatible with older bindings that only accepts the older ISO 5355 standard.

🎉

Wow you’re pretty talented there

Max steel eres tu?

Such an amazing jacket, its criminal that they only make it for women.

If chosen between ortovox ortler or arcteryx beta lt, which one would be better choice?

so prettyyy

💀

What size is the model and the jacket ? Thanks !

What is the need for these large zippers that lift entire jacket up? Not the armpit vents but the other ones

Who's the name of model ?

Are they castor grey pants or olive night?