dude.. I initially thought that cabinet was overkill and boy was I wrong... that's a kick ass design you came up with there. Good job, I'll remember you when I steal it to make my own :)
Ohhhhhhh!!!!, they are linked up via the rods,turning the turning is moving the router at the same time! I see now. Did you invent this ? I had to do a barley twist once,my wife was frustrated because she manually turned the lathe while I worked the twist with chisels,if she’d seen this video she’d have slapped the taste buds out my mouth that day. 😂😂
I have one of these my only compliant is I cannot make anything longer than 600mm example I cannot do a barley twist on a cane that is 900 mm long . Any ideas how to lengthen my work area ?
Hello. What is the maximum length of wood you can put in the router lathe and also what is the maximum diameter of wood you can use please. Also is the same as the trend router lathe .thanks.
The biggest I have used is 750mm long, you could probably go to around 900mm safely. The maximum diameter is 90mm. I don't know the Trend Router Lathe.
Jason--thanks for posting, great job. I actually just picked up a router crafter today. May I ask--if you are just "rounding" your stock do you hook up the router carriage to the cable?
I round it off in a wood lathe before using the router-carver.You have to hook up he router carriage to the cable, either to the top or bottom, depending if you want to go clockwise or anticlockwise.
*Works great.>>>**t.co/7CQ7Gl17Au** No need for the more expensive model. We tore down an old post and beam cabin and salvaged a TON of wood. We planed it all with this. Very pleased with the product.*
Hi again, I doing the doors or the 3 panel in Plexiglas completely, will soften ( heat gun ) in a semi circle on top and then at sides to meet down to the side boards as you have. I'll put latchets on all 3 pieces and adding hinges from the front panel to be able to push it along when not spiraling , it usually doesn't dust at front toward you. or perhaps make a cut groove on the front to move it along and avoid the dust all together. The side panels you have , what size circle you made?? That's all for now, when I accomplish it all I'll make a picture of it and send it to you, thanks again very much.
If any come and see this please give the man a like for it take work and a lot of thinking on how to help oneself and others make their machines better ok .
Very freaken niceeeeeeeeeeee, Thank you for the video of it, made my day, now I can keep the dust under control by making my own. It's a darn good idea and I'll make sure others that have the Crafter come and see your video :) keep it up, if I get stuck I'll give you a line ok, Thanks again.
I like the shoe box you made for the crafter, any plans for it? :) I did a 4 ft hollow spiral but it was weak at center and one broke, next time I'll set a wheel at center of the piece so it can remain straight.
I didn't really make any plans, just made it up as I went along using various scrap pieces of wood I had laying around. The measurements for the bottom piece is 1185 mm X 305 mm. The sides are 390 mm X 270 mm. I used 16 mm MDF board, piano hinge, Perspex. Let me know if you want any other measurements. I will upload more video, hopefully this can help you.
It'd be nice of you if you could send me regular pictures of it, just by looking at them I can get a complete picture of it and go from there. cccen48@aol.com
I made my box in plastic but I suck at making UA-cam videos my email address cccen48@aol.com so I can send you my pictures of it ok :) send me a note so I can send to you, thanks.
The machine is a '' Sears wood crafter '' you can find one at EBay or Craig's list, it's not new but was sold by Sears way back in the 70's but they still remain good.
I'm pretty sure that this machine is a copy of that of the ''Sears Craftsman router crafter'' in which is from the 70's but still around and doing beautiful legs and other stuff. EBay and Craig's list have some but they are asking too much. I bought mine for $30.00 plenty of reading instruction book. there is on UA-cam this Columbian instructor that gives a lot of detail on how it works and the things it does and he do a lot of them. What he doesn't explain you can pick it up from the instruction booklet. If you need translation pls let me know and I'll do it for you ok:) Look for it on '' Arte de Torno , he has around 7 videos on this machine .
Como algo para comprar una
How do buy and wher is available
He very nice piece bit name model
dude.. I initially thought that cabinet was overkill and boy was I wrong... that's a kick ass design you came up with there. Good job, I'll remember you when I steal it to make my own :)
How to buy please
Hi how to make the Router craft lathe nice working
দাম কত? যোগাযোগ ঠিকানা ও ফোন নম্বর দিন।
Price Rs? Address .
Labagnimt
Can someone help with the presenter's name. He was a household name in the 1980s on Brisbane TV.
happy new year
ตัวนี้ราคาเท่ารัยครับ
I just purchase a NOS crafter on ebay. Would you sell me plans to your enclosure? Thanks, Jerry
I did not draw up any plans. It just progressed as it went along.
Do you have instructions for making box that is really nice
Why? Just wear hearing protection and use vacuum after.
hehehehe, VERY nice.....wanna sell it?
That’s totally awesome !! 😁👍🏽 You turn the turning manually I see,but what’s moving/driving the router ? I’ll keep looking,but I don’t see it yet.
Ohhhhhhh!!!!, they are linked up via the rods,turning the turning is moving the router at the same time! I see now. Did you invent this ? I had to do a barley twist once,my wife was frustrated because she manually turned the lathe while I worked the twist with chisels,if she’d seen this video she’d have slapped the taste buds out my mouth that day. 😂😂
I have one of these my only compliant is I cannot make anything longer than 600mm example I cannot do a barley twist on a cane that is 900 mm long . Any ideas how to lengthen my work area ?
+
Fu#$ing amazing! Thanks for shareing
Hello. What is the maximum length of wood you can put in the router lathe and also what is the maximum diameter of wood you can use please. Also is the same as the trend router lathe .thanks.
The biggest I have used is 750mm long, you could probably go to around 900mm safely. The maximum diameter is 90mm. I don't know the Trend Router Lathe.
Thanks
Selling my dad's Craftsman Router Crafter 720.25250.
The cabinet is awesome!! Well Done!!
Thank you.
Jason--thanks for posting, great job. I actually just picked up a router crafter today. May I ask--if you are just "rounding" your stock do you hook up the router carriage to the cable?
I round it off in a wood lathe before using the router-carver.You have to hook up he router carriage to the cable, either to the top or bottom, depending if you want to go clockwise or anticlockwise.
Thank you@@jasonyoung7782
*Works great.>>>**t.co/7CQ7Gl17Au** No need for the more expensive model. We tore down an old post and beam cabin and salvaged a TON of wood. We planed it all with this. Very pleased with the product.*
Hi again, I doing the doors or the 3 panel in Plexiglas completely, will soften ( heat gun ) in a semi circle on top and then at sides to meet down to the side boards as you have. I'll put latchets on all 3 pieces and adding hinges from the front panel to be able to push it along when not spiraling , it usually doesn't dust at front toward you. or perhaps make a cut groove on the front to move it along and avoid the dust all together. The side panels you have , what size circle you made?? That's all for now, when I accomplish it all I'll make a picture of it and send it to you, thanks again very much.
That sounds interesting. The size of the holes on the sides are 100mm or 4 inch in diameter. I'll look forward to see it when it is finished.
Yes, due to bad back all in wood would be heavier to remove from my router table.
dang, you get an A+ at this ideal cabinet.
Thanks for your positive comment.
I always tell my daughters to stop and think and you'll come out with a solution :) t.y.
The bottom middle clap down, doesn't it gets in your way if you need to make a smaller part?
There are two screws that can be loosened and it can then be moved into any position.
Those small 2x2 and 2x4 pieces at ends and center are they to hold templates?
Yes that's right, they have 5/16-18 4-prong T-Nuts at the back, to hold them on.
How to buy 8279787790
@@ytfoodie what is this numeration about?
@@ccccen +918279787790 Whatsapp no
I want to buy
Is that a template at the beginning with the castle cuts?
That's correct.
If any come and see this please give the man a like for it take work and a lot of thinking on how to help oneself and others make their machines better ok .
Very freaken niceeeeeeeeeeee, Thank you for the video of it, made my day, now I can keep the dust under control by making my own. It's a darn good idea and I'll make sure others that have the Crafter come and see your video :) keep it up, if I get stuck I'll give you a line ok, Thanks again.
Yes, feel welcome to come back and ask if you get stuck. Just try to be patient for a reply. I am a very busy person.
lol, I can understand :)
Can you let me see your crafter box pls.
I like the shoe box you made for the crafter, any plans for it? :) I did a 4 ft hollow spiral but it was weak at center and one broke, next time I'll set a wheel at center of the piece so it can remain straight.
I didn't really make any plans, just made it up as I went along using various scrap pieces of wood I had laying around. The measurements for the bottom piece is 1185 mm X 305 mm. The sides are 390 mm X 270 mm. I used 16 mm MDF board, piano hinge, Perspex. Let me know if you want any other measurements. I will upload more video, hopefully this can help you.
It'd be nice of you if you could send me regular pictures of it, just by looking at them I can get a complete picture of it and go from there. cccen48@aol.com
I made my box in plastic but I suck at making UA-cam videos my email address cccen48@aol.com so I can send you my pictures of it ok :) send me a note so I can send to you, thanks.
What router bit are you using?
It's a Carbatec Router Bit - Barley Twist. Part No. CT0715
Thanks dude! Just scored on a Craftsman Router Crafter and want to buy the correct bits. Appreciate it.
Who is the manufacturer of this lathe?
Not sure of the manufacturer, I bought it second hand a long time ago. I have modified it a lot, and made the case to enclose it to control the dust.
Is there anyway you can send me a few pictures of the box you made, Pleaseeeeeeeeee at cccen48@aol.com
The machine is a '' Sears wood crafter '' you can find one at EBay or Craig's list, it's not new but was sold by Sears way back in the 70's but they still remain good.
I just found my owner's manual, it is a Vermont American Router Crafter.
I'm pretty sure that this machine is a copy of that of the ''Sears Craftsman router crafter'' in which is from the 70's but still around and doing beautiful legs and other stuff. EBay and Craig's list have some but they are asking too much. I bought mine for $30.00 plenty of reading instruction book. there is on UA-cam this Columbian instructor that gives a lot of detail on how it works and the things it does and he do a lot of them. What he doesn't explain you can pick it up from the instruction booklet. If you need translation pls let me know and I'll do it for you ok:) Look for it on '' Arte de Torno , he has around 7 videos on this machine .
Nice thicknesser is it worth the buy over the ryobi Model cheers ocean
I've never owned a Ryobi Model, so I can't comment.