Відео

No, inside is proprietery cable.

@@HouseAndSolarProjects Usb to C?

​@@HouseAndSolarProjects6:05 What is showing here is Type C to type C cable.

​@@HouseAndSolarProjectswdym?

Yes, thats right

There seems to be one zero missing. As it is an LFP battery, 3000 is a plausible number.

I shared a link, but youtube deleted it. That's what they put there in the product detail (ROMOSS UNION STORE) at Ali Express. Charging cycle: 300 times.​ @HouseAndSolarProjects

I got is as a warranty replacement from the seller. However the motherboard can be bought from Alibaba.

​@@HouseAndSolarProjects Could you please give me the seller's link? I have been searching a lot for this board, and still no result

Thanks for the Suggestion.

Almost every Attribute is available.

Toothpick is still going strong since I have repaired it. Before I used the PETG 3d printed one, which unfortunately did not last even one week.

keep in mind that compared to other brands with these inputs/outputs, Majority of the time they use Lipo. Whereas this uses Lifepo4 (Lithium Iron Phospate) so it is very unlikely to have that issue at all. Regardless, Good request. I will be looking forward to if he makes this video 😁

@@CL4P_HUB Hi there, I am talking about the board it self. You can also search that even Gan Chargers cannot sustain 100w load for over 1 hour and 30 min. I’m sure this powerbank takes more than that to fully charge. Powerbanks has closed enclosure. That’s why I want to see if this model can withstand its full load capabilities. I have a background in electronics and I am planning to make a DIY powerbank. DIY version is more cost effective, around 35% less with more capacity. But, I do not have the luxury of time to do it and I need it ASAP haha.

I can confirm that many powerbank I tested, could not deliver continuously 100 watts, because of heat issues. I will test this one and update in description.

@@HouseAndSolarProjects Thank you

What type of cord comes in the Romoss power bank?

I tested with 4 panels@ 410w. However I would not use 24v system for more than 1500 watts. Anything more than 1500W, should use atleast 48v system.

In parallell or series? What was the amperage output of the four panels?

@@mauritianobserver they are 350w pannels , I have 2 series and the 2 pairs in paralell

@@HouseAndSolarProjects my pannels are 35v so 2 series is 70v X 700w and total is 1400w X 70v

Danke für den Hinweis!

For making the video I use the default video editor from phone itself.

You can use any usb c cable for usage under 22 watts. If you wish to use 65W, then you have to use the PD 3 compatible usb c cable.

Sorry, I will have to check that.

Это наверное болшая кнопка включения и выключения

This instruction seems to be poorly translated. What helped me is to do some charge and discharge cycles.

Yes, only if the phone also supports the required PD 3 profiles.

Thanks for kind words.

Thanks for the input. This issue should be solved in newer videos.

No, it not only due to the number of batteries. The Powerbank in my opinion utilises the Chip in 100W configuration. Unfortunately i don't have access to the datasheet.

Когда заряд паурбана показывает 30 процентов то выдавать он начинает 65 ватт? это правда?​@@HouseAndSolarProjects

​@@HouseAndSolarProjectsкогда 30 процентов заряда на паурбанке,то он заряжает в 65 ватт?

Eu c garfo quente

PMT40 is my favorit because of the Aluminium boy. Everything else is same.

Yes it has 32700 LFP battery in 8S7P configuration.

​@@HouseAndSolarProjectsСпасибо за ответ.Просто есть обзоры где делают разборку этой зарядной станции и там Li-on

First discharge it to 0%, use USB Ports to discharge. Then charge it to 100%.

@@HouseAndSolarProjects thx. i hope it works

@@HouseAndSolarProjects thanks for your response🙏🏼 But the station turns off before the charge drops to 0%. Even if i use usb ports

Then It seems that one or some of the cells in the pack have become unbalanced or bad. Please check the individual voltage on the balance cable on the balance board.

No, it is recommended if there is check valve used. I don't have a check valve.

@@HouseAndSolarProjects thanks you sir

Yes, it can supply a max of 65W. But it cannot go on flights.

Thank you

Capacity and chemistry is same but different dimensions.

It requires 36v, you can put two of them in series, then it should work.

Yes, it is toasted. My son tried to switch in auto mode :D

Yes, I tested it. The measurement is korrect.

What is not working? The scrolling or the button press?

You can use both the ports, but the maximum power from both the ports are limited, which is less than 30Watts

@@HouseAndSolarProjects Understood. Thank You.

I used the charger with PD Protocol

@@HouseAndSolarProjects Thank you

Good question! Please watch the newest video on this!

First remove the handle, then you can pry open the top cover. You can replace the fan with a silent one.