Відео

We just bought a 9570. Like your idea to measure cob. That would be needed with metric wrench correct? And if so are the concave setting numbers also in metric? Like the 28 you mention is that 28 mm? Thx.

What’s the part number for those filter pliers?

I dont have that Auto option just OFF and FIXED? what am i missing???

Hi! Can you give me the Stem Valve part number? I need some for replacement and I can't find them.

What happens if they go red

we just getting a 9570 and have corn and beans along with 60 acres of wheat. you talk about the inserts? so how many inserts would you recommend? looks like the first 2 or 3 maybe or how many would you recommend on wheat? and use them for beans? we coming from an older 9500 and no experience with the rotor machines. thx

Brilliantly explained Very informative Thank u

Brilliant explanation Thank u guys Best I've seen/ heard Learnt lots

I still can't find the zerks for the reel pump

Why the meters turn off when bounce?

great video...thanks for the info. I recently bought my first 600F Platform.

Does this work with the greenstar 1800 display?

If I have only 5 scv's is it still not recommended to use #5 as a constant as well?

Very good info... thank you very much.

I have a problem with me 1910 seeder, no communication with unit A11, and these one show cod. error BMU 000609.02-ECU Air Cart Communication Loss. any suggestion how to solve this problem...? This happened when the seeder was connected to a CASE tractor to the tractor monitor, and then when connecting it again to the John Deere 8200, it does not recognize the module and throws the error described above.

MAGA MF!!!! MAKE AMERICA GREAT AGAIN MOTHER FUCKER!!!

With exactapply system how do guys top dress with fertalizer and possibly keep a 80 mesh screen clean enough to keep product moving through?

Hey question. On one of my combine monitors it’s shows the grain % inside my tank on my main screen I just bought an new one and it doesn’t show it on the main screen any idea how I can do that ?

Is that leverage bar something you get from Deere or did you have to make that?

Why do alot of the parts for the newer John Deere heads seem lighter duty? Plastic guides that have to be converted back to metal, people saying the old 40 series row unit was stronger, except for the welded cluster gear of course. The gathering chains seem beefier, but alot of the "improvements" seem worse.

I really wish Deere had a sight door into the bottom sieve or cleaning shoe. It's a key ingredient to the "kill stop".

Thanks for the info! 😊

guy did a great job in machine details thanks

Ok! Thanks

Does that 4th separator grate get spacers for corn?

Excellent job showing locations 👍. Unloading auger drive pulley (outer pulley on the engine gear case shaft) has a zerk down in the bottom of the pulley groove. Also wondering why the upper and lower feeder house sheaves weren’t mentioned ? There are 4 more zerks there.

Nice

Nice vid! Very informative and interesting

Nice vid! Very informative and educational

the 4 nitrogen accumulators lower the front deck and recharge them every 500 hours max. otherwise they break through easily. 2 45 bar 2 30 bar (small)

in the drive shafts I removed the caps and put two grease nipples on the wheel sides. motor side 1. I do them every 10 hours. in order to have little wear on the drive shafts, it is necessary to work with straight wheels

I grease it every 10 hours on the engine side half-shafts. steering heads and arm heads on the wheel side depends on whether I see the headphones more deflated. but say 1 pump every 30 40 50 hours max

So they removed the print on the tab, and now it is export, with no way to fine tune the image. Is there a way to get just the field image on a bigger print out without cropping it to add the other data for planning purposes?

Keep the deere's running

I don’t think the nozzles pulse faster or slower as explained in the turn compensation segment. The amount of on/off time per pulse is what changes.

Why is the track 121.25 feet and not 120.0 feet?

Few questions, at 10:05 your setup shows 31-13" rows with a planter width of 480", and 16-30" rows also at 480", should the 15" setup be 465". Also, at 15:50 do you need to change the 31 rows and the 16 rows boxes? Does the row configuration always stay on split row even when planting 30" rows?

Thanks for a good video. Just a question I have a 645fd and my outer belts on both sides keeps on moving sideways..just like you have said on the video with belt tracking my tensions are perfect and I don’t have the allignment screw mine is just a straight guide bar…what do you think can be the problem?

Do you have to have a cellular iPad?

This is the best explanation of “margin” that I’ve heard.

Where do you get a hitch to pull the air cart or how would you do the wiring for the air cart. Want to do a setup like this but don't know how to go about it

Very Very helpful

Would have been helpful if would named the tip such as 3D tip , not a Liberty tip , the Hypro rep if was watching this probably cringing.

Hello! Greetings from Portugal.

Pretty cool Haulmaster grain cart from Elmer’s Mfg, 20 minutes East of us!

Weeds keep getting under the feeder house chains on both sides at the top is there anything we can do to fix this problem,tkx.

Excellent description, this comment is just on the engineering. Why on earth would they make a complex fan drive system like that when you can just run an electric fan controlled by a relay? Combine variable speed cleaning fan drives makes sense, this seems like it was purposefully designed to make John Deere money on parts replacement. I'll keep my 4020. :)

so, to open or close the chopper, to get at the chaffer, is there a lock of anytype to be undone? like on the 70 series.

Thanks, great job!

Looks like a great tool. I'm wondering why you chose dry fertilizer over liquid?