Відео

Nothing like giving yourself an inherent disadvantage to treat your skill.

@@chase7354 haha thanks 😊

@@SammyMoore-tg5gs You are right but nice to someone shooting something other then a 6.5/6mm

​@SammyMoore-tg5gs there's an entire Division for .308 shoots under both IPRF and PRS Rule sets (Limited ans Tactical).. so against those within my division there is no major disadvantage. I'm still learning so may as well shoot a cartridge that may be less forgiving if I don't do my bit right 👌

@danishshooterhunter haha wasn't too bad with the plugs in. But first round certainly made me jump a bit 🤣

@@jcprecisionrifle 🤣🤣

@GunnyRabbit should definitely give it a go. I think there's a one day match at Bisley coming up and a couple of training days arranged by PRS UK

@kitsune4635 it comes in its own stock as reviewed. But it uses a standard Remington 700 footprint so there's a whole host of options for aftermarket Chassis. My choice is the Vision Hybrid 👍

@@jcprecisionrifle much appreciated!

@michaelh3926 those are Helikon Woodsman. Good value for money but wish I'd worn my Kryptek Mojave pants though.. much cooler and less sweaty

@@jcprecisionrifle Thanks! Great shooting, thanks for the perspective!

@@michaelh3926 You're welcome! Thanks for watching 😃

@andysimpson9437 yeah thanks bud. Definitely need to make the first shot count, keep it smooth and get a good call from it for the rest of the Stage... the excitement gets to me every time 😅

Thanks! Annoying to have only got 7 on a Prone stage 🤦‍♂️

@@jcprecisionrifle i feel that. At our last match, I got a two on the tank trap stage. I normally clean the tank traps. I was gutted

@NBKmediaPRS still... I was much more consistent across the entire match so I'll take that over cleaning prone stages. The cleans will start coming thick and fast soon 💪 🤞

@NBKarmwrestling so the range does only go out to around 600m.. but that is usually balanced with target size and difficulty of the Stage.

@@jcprecisionrifle that makes sense. One of the best feelings I ever had during a match, was connecting with a Target at 1300 yards on the clock with my 308.

@@NBKarmwrestling nice! I'd like to see how far I could get my .308 one day. 950m is as far as its gone atm

I'm fairly certain I could hit at 1 mile with my 308.... But it would take perfect conditions

@patricksmith0115 so the AI Chassis is made from 3 separate components. Are you in the UK? 🇬🇧 If so give Spartan Refinishing a call/email and they will be able to talk you through it. If not Vision have a handy page on their website to find your local dealer

And from alot of what I've seen... half the product.

@@jcprecisionrifle Yes, you are right, and Scopemate will have an advance model soon.

@lindayang330 would be interesting to see how they compare when it comes out I guess

@@cmmtin3559 I know right! We can shoot out the back of my Insignia next time if it means I don't have to carry my kit as far 😅

😂

@siddy957 I know 🤦‍♂️ got too carried away

@@joshuacarvalho5405 Pro Shoot in Wales.

@@storysatbedtime no I use a TriggerCam 2.1 attached to the Eye piece.

@cmmtin3559 I know right 🤦‍♂️ got too excited 😅

@cmmtin3559 yeah the Vision Vulcan certainly looks the part! 90 degree ports too so less concussion 👌

@NBKarmwrestling Yes I do and definitely the biggest part I find when editing these videos and watching each shot frame by frame is how I rush into some shots when I'm really not settled. That having been said.. I am getting a lot more comfortable with getting on target quickly and being more stable than before. The only way is up!

@@jcprecisionrifle hell yeah dude! It has been cool tracking your progression. This is my arm wrestling channel, but I do have a PRS channel for my wife and I. NBKmedia

Thanks! Ultimately, that's why I created the channel.. to track my own progress. Onwards and upwards!

@BenExile Yeah the footage definitely shows the shot breaking well after the timer. Just bizarre that it showed in time on the timer??? Thanks 🙃 hopefully the 1st of many!

@adampurkey6565 yeah don't get me wrong, not everyone will want or even need a spenny Bi-Pod and will get on perfectly fine with a Harris clone. But for the money this is 👌 compared to the competition

@freelancer2011 I'm there right now 🙃 haven't used it yet other than zero but I will report back 👌

@freelancer2011 it didn't disappoint. I need to get used to knowing how high I need to set it for certain barricades etc but it performed perfectly 👌

@@Framnesen thanks bud 🙃

@randallwhite9015 😅 Part two is coming, which will be specifically covering how it performs. Got a few issues to sort out first which again will all be covered in the next part

@PeppicoBF You're Welcome.. let me know if there's anything else you want to know 👍

@Rico11b pricing is relative. Sure it's expensive. But when it's doing exactly the same as the competition for £230 less.. is it overpriced?

@@jcprecisionrifle It's doing exactly the same thing as two wooden sticks and a string. Much cheaper also.

@@Rico11b Okay... good luck with that 🙃

@@jcprecisionrifle Who needs luck. It's basic physics. And I keep my money in my pocket.

good thing its not your money mate

@BenExile Yeah, it's very impressive. Really hope they carry the same updates over to the A-TAC for 2025

The Vision Chassis already has a built in adjustable bag rider 👍 The new Vision Pro Chassis has even more adjustment available on the bag rider

@@jcprecisionrifle I know it does but adjustments can’t be made without coming off the rifle. The bag rider I’m talking about can be adjusted with the slightest turn of a knob while never coming off the rifle. It’s made by long shot precision.

@@sstevens7 I mean.. it can be adjusted by loosening the nut.. but I'm guessing you're talking about something that is micro adjustable for ELR or F Class.. in which case no. Not unless you want to drill and tap holes in the existing one.

Thanks 😆 looking forward to getting Part Two of the Bergara review recorded now.

@@jcprecisionrifle I hit subscribe on you so when you do I definitely check it out

Have you reached out to Vision directly on their Socials? They're super helpful guys I'm sure they will be able to tell you when the next run of them is... which country are you in?

@@jcprecisionrifle Thanks for reaching out. Am in Canada

@tar6805 GCP Rifle Co in Florida might be you best shout then

Yeah, it's a very pointable little setup. Give Chris a shout at Spartan Refinishing and he'll be able to sort you out. I specifically wanted to go as short as possible on the barrel length but you'd probably get better performance out of a 18 or 20" barrel

Great stuff buddy! 👌👌

Thanks.. plenty more to come as my finger recovers

Thanks 😆

Depending on what you want to use it for and which country you're in will depend on what's available. If you head over to my Instagram, you'll see I've put mine into a Vision Hybrid Chassis available in the UK at Spartan Refinishing. I'll have a video of this coming out soon (I've currently got a hand injury but once that's healed up I've got several videos lined up).

Everything is £100

It's more that I choose to shoot Limited Division under IPRF Rules as I don't reload so shooting a division where everyone is shooting Factory Ammo makes sense. If/when I start to reload I'll probably go to a 6/6.5mm cartridge

Exactly what I use. 175gr S&B. That having been said, I've just got a new barrel and will be testing for some different ammo to use that's available in the US for the world championships in September

That is my understanding. Obviously I haven't tried it in every stock or chassis. But I've not heard of a B14 not fitting in a Rem700 footprint.

Did you have a specific chassis in mind?

Thanks for the answer! No, nothing special - I am only brainstorming. I am looking for an affordable 223 bolt action rifle that is very light and short. What do you think about barrel lenght and velocity? B14 extreme sierra uses a 18" inch barrel.

@sparkplug161 the Sierra was also one I considered. Lovely looking stock but as I was going to be going straight to a chassis I decided to go with the Stoke. Velocities from what I've tested as follows: Norma 55gr .223 FMJs - 3056fps avg Norma 69gr .223 Match - 2620fps avg Sako 55gr Gamehead - 2919fps avg Hornady 55gr Varmint Express - 2928fps avg

Well, I am looking forward for the stock you gonna choose. I hope you gonna make a video about it then.

At the moment I can't give a conclusive answer. The rifle is really not fitted to me well and the scope mounted too high to get a proper, repetitive cheek position. I hope to have it out and into a chassis soon and then Part Two will follow with some accuracy testing. BUT.. it does come with the standard Bergara Sub MOA guarantee, so if there was any major issue out the box, I'm sure Bergara would sort it.

@@jcprecisionrifle thank you, i’ve subscribed and i’ll wait for the part 2

@@Italianshooter01 thank you 😊

I don't know about the .22-250 unfortunately. But in my limited testing so far (not in this video) my .223 did seem to like 69gr Norma Gold Targets

Bergara lists the ammo on their website. Also, clean the paint off the aluminum chassis,… these problems should be well documented on the interwebs. I hope you get her shooting well!

My rifle in stoke in 22-250 will do 1" at 100yds. 50gr. Remington HP.

Good question! So the flat width just infront of the magazine is 1" and that then contours around ½" either side to the edge. The entire stock then narrows towards the front of the rifle down to around ½" of flat surface and 1½" including the contoured edges. So, if you're precise with a drill you could easily mount a short ARCA section towards the magazine for use with a tripod and again if you create an adition fixing point you could get a good length section of picatinny right up to the front of the stock for bipods. Hope that helps

@@jcprecisionrifle Thanks 😁 That's really helpful.

Thanks 😊