Відео

He's Russian?

I love it when the algorithm decides I’m watching a video posted an hour ago with 10 views. This is super cool, thanks for sharing!

I received your ebay offer for this machine. What service was performed? Was it calibrated for optimal play? Does the record work with no issues?

hi the teac 44 is a well make a tank i have one teac made come very good decks can't get them in the uk my 44 80-8 all came from the uk it was a time alot were just getting rid of the decks there's only one man in the uk that has alot of REEL TO REEL DECKS finding the parts in the uk is thing you are ok usa is very big so the turn up

NICE. 🎵🎵

Fin maskin 💯%

hi i have this deck 100% 3 speed up to 4 if you have the kit 15 ips with the kit and change over the pinch roller the 8 track can do 7 1/2 as the motor has 2 speeds i recorded some 8 tracks for a mate he said the 8 track speed was not right i picked this up from a lock up at kings cross lockup the man had to sell all the gear in the lock up parts always coming lose all the time and them caps need re glue all the time

good job on the psu!!i have one of these that i paid 600$ cdn in 2001!!long time ago!!during a jam i was recording a friend dropped a beer on it and threw the mixer behind the table on the floor breaking the power cord!took me two decades to finally take it out of the closet and fix it!!i didnt have the knowledge and skill back then but finally got it working!!ordered a plug on amazon and with the pinout i found on the net a was able to hook it up!!the only thing is i still have to open it all and clean everything!!a new belt and a bunch of cleaner and i should be able to record some mixes in the analog world to it and enjoy the goodness!!

STUDER

Hi,great video! Is this 2 tracks in one direction and turn the tape over to get the other 2 tracks or is it 2 tracks in one direction? Best regards

I had one of these brand new. One issue with these was the DC reel motors. I heard something about a modification where one could get the regular AC reel motors to replace the DC motor assemblies.

Beautiful

did you find the reason for led meter showing signal? i got the same behaviour but what i noticed is that when i measure the output signal using an oscilloscope, i get a raised 4 volts that dont oscillate... and it is somehow linked to the visible meter value... i recapped the cards, but it did not change anything. When i place the card into another channel slot, the error travels with the card, so i think its clear there is something happening on the channel card itself.

Miller’s great but Bass guitar’s can’t lead a band. Notice the importance of the horns.

Hey I have the exact same deck as you! Do you know where to find any good belts for the deck?

Next time, use a tripod, camera gave me a headache!!

Мерси за видеото, истински се забавлявах

Playing flute ! that's rich. Gotta love THAT (^8

Was there a Tascam Pro 38 and a consumer 38? What was the differance?

So good to see your video. I myself sailed the Bay Area spots from 2007 to 2023 non-stops. Sailed all the spots with Crissy field being my home base. Good to see the evolution of the gear in the last 20-30 years. I personally do windsurf, windfoil and wing foil. Foiling is amazing and highly skilled too. Wish you could have tried because it’s amazing. Can’t wait for your 2nd video. Thank you!

Fascinating story!

❤❤

Donde puedo importar uno desde Chile?

Amazing machines... love seeing what gear you are working on... cheers from USA!!

Does the tape need to be new for the calibration?

Very impressive work

I just took one of these in on trade yesterday. Mint condition, in the original box, with the dust cover. Should be a fun project.

Hello. I must say I am very pleased with your many instructional videos you had made and time. Your knowledge is really great and many smart solution I'm really impressed.🏅 - In his video about 4-speed modification was something, wow! 🏆 I am really interested in and want to know a little more about that? I have tried to search the internet about it, but was unsuccessful. Can you please help me?🤓

I still have this same deck (my profile pic). It was my father's and I still use it all the time. Just made a mix tape yesterday. For something that is over 40 years old, it still preforms great.

Hello sir I'd like to ask can you turn my Sony TC- 580 to take that size reel and if you can how much will it cost, thank you so much and much success to your show.

do you have spare parts for it? You don’t take these for repairs, I need to set mine up.

Why isn’t there a website link in your description? 😅

hi have this model it don't like the small reels a tenson thing payed very little for it bro gave me money for it came from oxford u yes it porr's like my cat

hi have a otari mtr 12 with 1/2 head blocks why you may think because i was offered alot of zonal 1/2 inch over 100 tapes i can change the head block easy to do there's bolts 3 of them and it lifts of change over the 1/2 inch play head block in a deal and i have a 8 channel head block with buttons on it 1/2 inch so it's easyer to edit tapes

hi all the gold face one's are 20 bit there's a 16bit one with the same case size it is a 16 bit i put a tape in to format XT deck i have 3 gold front 20bit the rest is 16bit 4 working black face 100% working they get little using time love to have them around i get offered gear all the time not to sell on alot of it because i can make more money moving audio of the tapes the last one i picked up he said he move the audio of and just re sell the deck to me

hi i have a up date i ripped apart a deck to do alot of RD on the last deck i did find alot capstan motor can run like crazy beware all the wire's in the plug that goe's on the servo pcb left it of one wire motor went crazy speed note the main pcb you don't need it the deck can run on a computer pie the counter is bad on my deck the main pcb is going bad so i got a mate to dip it and send all the parts back to me there is key parts needed i find in the tascam 38 decks i did find out how the power trans work the tenson side i plan to post a video this year you know them 14 inch tape you had i am using them with otarii mtr 12 motors and info i got from the tascam 38 deck RD work on that scully 280-14 i pulled apart

hi watched you video sometime ago you put me in the right place to look i have one tascam 38 that was in a very bad way note i had the main pcb put in a solder bath the main pcb was bad and i started to re make the pcb and all i needed is some key parts the power ic's for the motor's and coil power ic's now i have a working mk 2 for playback only it's for cue the tape and editing on i have made the deck so it can spool the tape like on my otari mtr 12 i worked out how the tenson ic's work you know the fine speed knob i changed this to a step speed knob 3 3/4 7 1/2 15ips danger never let the capstan motor run are full speed you up set the solder tabs in side the motor i did this the motor started playing up till i resold all the solder parts i have some teac 1 inch heads i was using them like you said till i got my soundcraft 381 - 2 speed deck i jazzed the speed on this as well to be the same as my brenell mini 8

Выглядит стрёмно. Зачем это делать, если есть заводские варианты за доступную цену?

Allow me to say this is not the best way because the openings for the screws on the flange have raised edges and they will scratch the tape as you are gliding it especially that you did not even open the cardboard box entirely There is a better way and I used it on 250+ plus pancakes without out losing a single one Your slide your finger under the NAB hub and you keep the pancake in vertical position then you take the flange and line up the openings and pluck it against the pancake then turn the pancake and flange with flange facing down the pancake up, put the next flange on top et voila Thank you

Amen brother

hi i have to do alot of work on 6 tascam 38 getting there now fold bad audio card just one only just note i have had to repair bad breaks in the main logic pcb age is getting to them you have a had t find model with the record LED 'S my 34 is is like your deck i have a tascam 38 that is play back only i jazzed a new logic pcb for it note used to have a otari 50 50mkIII it went very ill lost the deck big time when i was looking in to how the tascam 38 works i need find alot out i desolder al the bad logic pcb to find what is bad and started to put all parts back in the pcb is to bad to use it what it's a of i did find all t power trans side of the pcb is ok so i have the deck running with out the counter the used main pcb would be over £120 if i can find one and it could be bad as the deck can play 7 1/2 i am ok with it

Hi angel is there any way you could provide info on how you built your power supply for the 460? Thanks so much im advance!

I still have one of these in working condition. Time to set it uo and play around with it, I bought it new in the med to late 1980's for $2700Cdn Didn't get much for your money back then, The mixer is still worth having around with 8 channels of analog pre-amps.

Is there any sound difference between the 4 track and 2 track model if you would play for example a tape from "analogue productions" or "the tape project" which are in stereo 2 track recorded?

Looks good while running, but how do you stop?

😮 This model is the older Brother of the Akai X-330 before take over.Very nice machine(X-330)& very versatile being able to take it outside with its built-in portable speakers,nice deck.

hi got a otari mtr 12 motors in a scully 280-14 i got the know how to run the motors out of a tascam 38 the pcb in the tascam 38 had a bad break so i got all the good parts out put the in a bag cut the pcb up in to to parts i needed ordered the same power trans wow the deck run's like a dream using mixed tec 2v dc to 5v dc in to the first ic the 2nd one deal with the power i been talking to tec's ac motor's are a pain dc you get alot more power and i can jog the reels to now i have a jog wheel on a tascam 38 as well it's been jazzed up easyer to edit tapes the deck was very ill so i had time to work it out

Digitize this ASAP..on CD or something..

hi have alot of this model i have one it looks ok from the front the main pcb was bad i made a work around for the deck i had to jazz it up ones with heavy wear you have to do a work around i have to make a video next year with what i did my deck has the spooling like i jazzed the tenson and made new rollers for 1/8 tape i have the basf reels 8 1/4 very hard to find now

UN bel registratore.....elegante, robusto👌👋👋👋👋👋 ITALIA