I used to have a 2011 Mercury Milan. I got it on June 21st,2012 to early December 2016. It was a little too big car for me at first. Both of my parents drove the car for a couple of weeks. It was my 3rd car. I did wanted a 2011 Ford Fusion back in 2012 and even wanted another Ford Focus or Escape that was slightly used. It kind of cool to watched these videos.
Wow it's really that easy? Thank you. This will be my next fix. My dash light has been on for the longest time because mine were just never linked to the car
Hi, my boyfriend has a 2010 Ford fusion hybrid. I was wondering if there’s any way to turn off the auto shut off. It’s so annoying to be stopped at a light etc. and the engine shuts off again. Is there any way to disable this feature thank you.
FYI and anyone else looking, Putting the Weight in or on the Wheels takes a lot of extra stress off the Machine, Transalxe, bearings, etc.... Weight ON the tractor has to go down thru the axles and bearings to the ground wearing out the machine a little sooner. ..... But Me too, I have some chain in a box on the back of mine right too. Good video...Thanks for posting.
Yep,have heard that said or the lighter duty machines before and it makes good sense. I was gonna say similar but checked the comments first. If it's basically an extra machine you don't really care about then do it,otherwise put the weight on and/or in the wheels and tires.
I have the 2012 Ford Fusion SE. Same color. A little bit of making fun of Sync. Sync has connected to your phone, and is reminding you, that 911 assist, is set to off.
@@seans7788 Do you know how I turn on the heated seats? I just got a 2010 yesterday and the guy I bought it from had it on for me but I wasn't smart enough to ask how you turn it on haha. I went out yesterday to take my mom for a ride in it and can't find it. I haven't had any luck finding a video on it so far. Was hoping this one would show it, but unfortunately not. lol
The ambient interior lighting will turn on lights on the driver, passenger, and rear floors as well as around the cup holders. You can also cycle through colors. Very cool feature
Hey, great video! Do you have any suggestions to allow the blade to turn left or right. Mine has a very difficult time, I've greased the rod, and still it's a challenge.
Sorry about that. Mine works pretty freely. There are several moving parts, so you need to investigate each one individually. I would suggest disconnecting the rod that connects the handle to the blade. Then clamping the handle down that releases the blade pivot. Finally, rotate the blade left and right by hand, to see if it moves freely. It should pivot easily. My pivot plate is fairly loose on top of the channel. It can move up and down an 1/8 inch at the back if I lift on the blade. When you find the binding part, it will need to be made looser or be lubricated. Good luck
I have a Craftsman with the same type setup and had the same issue over the years. if you are still have problems this season with it being hard to change directions hold the hand lever in and check to see if the position locking lever controlled by the cable on the 3 position pivot at the lower end is completely clearing out of the position notch while being in the center position, if not loosen the (2) 1/2" lock nuts and adjust them lower on the threads one turn at a time towards the lower end of the cable until you can move the plow easily in either direction, always worked for me.
@@alwaysbeeurselfHey, I was running out of adjustment on those lower 1/2" lock nuts and having difficulty with the plow angle operation today but after careful analysis I removed that 3/4" long round spacer with the 1/4" bolt (he touches it @ 3:11) where the cable end mount attaches to the plow arm then re-installed the cable end mount directly to the plow arm (without the spacer) using a shorter bolt and it is a definitely a fix while It gives you probably up to another 1" of tightening adjustment on the cable. I had to loosen the lock nut bracket and turn it slightly further downward so it would be in a straighter alignment with the cable end to not put wear on the cable itself moving in and out of the sleeve opening end area, hope that helps you a bit more. I always enjoy redesigning things to work better while cursing at those engineers left and right who designed them in the first place.
How do I bolt up my tractor supply plow to my John Deere 125 automatic to hold up my plow
Was it really that easy to get the tire to fall back in place on the when putting it back on
Forgot to show, how to lay down the back seats for more room for luggage . :)
I used to have a 2011 Mercury Milan. I got it on June 21st,2012 to early December 2016. It was a little too big car for me at first. Both of my parents drove the car for a couple of weeks. It was my 3rd car. I did wanted a 2011 Ford Fusion back in 2012 and even wanted another Ford Focus or Escape that was slightly used. It kind of cool to watched these videos.
Wow it's really that easy? Thank you. This will be my next fix. My dash light has been on for the longest time because mine were just never linked to the car
This Fusion is an LX basically a top of the line under the Fusion SHO Sport.
Good job bro….epic….smoooth
What is the sensor number?
Funciona la cámara cuando retrecodes ?
Thanks helped a lot.
What was the sensors please any link?
Thanks great video! 🎉
bom video
Hi, my boyfriend has a 2010 Ford fusion hybrid. I was wondering if there’s any way to turn off the auto shut off. It’s so annoying to be stopped at a light etc. and the engine shuts off again. Is there any way to disable this feature thank you.
Did you have a link for the sensors from Amazon?
I used charcoal with a blower
How did you heat up the aluminium?
Very helpful. I didn't know harbor freight tool can do that next visit to harbor freight I will get one thanks
Just got one of these and like it mostly. But I wish the turn signal and windshield washer controls were on separate sticks like most other cars.
The red light up in corner for backing up sound went out
Got my first car and was really confused about half the buttons, thanks for the very informational video
Great idea with the bungees and the basket.
"...Well .....what would be best have them all done with new tires or do I diy as man in the video is doing...?"
My tires are fine, but this is what the obd on the car reads.
Does anyone know what the ambient lighting button does??
How do you adjust the Blindspot mirrors on the side mirrors?
FYI and anyone else looking, Putting the Weight in or on the Wheels takes a lot of extra stress off the Machine, Transalxe, bearings, etc.... Weight ON the tractor has to go down thru the axles and bearings to the ground wearing out the machine a little sooner. ..... But Me too, I have some chain in a box on the back of mine right too. Good video...Thanks for posting.
Yep,have heard that said or the lighter duty machines before and it makes good sense. I was gonna say similar but checked the comments first. If it's basically an extra machine you don't really care about then do it,otherwise put the weight on and/or in the wheels and tires.
I was able to put 20 lb. barbell weights on my wheels by just drilling some holes in the weights and using threaded rod to attach them. .
Brilliant, I am grateful for the tips. You present in calm manner which is pleasant and encouraging 👍✌️😊! thanks, I have a 2011 fusion, Jacobus K.
Thank you so much. I did not think my power mirror button worked on my 2012 till I saw your video. I was just not using the switch properly...:)
Thank you Mike! Needed this video for windshield washer
What's the measurement from the ground to bottom of the mount for the plow that controls up and down position?
which tpms sensor did you buy?
How do you turn off interior lights?
Great video! Thank you. Please post us the link to buy the sensor on Amazon.
very great video lots of information I'm actually buying a 2011 this next coming week
Hey what’s the model number on that plow? Just incase I would like to buy the same plow for a machine
The current model is the bg20943
@@TailgateTech thank you
I have the 2012 Ford Fusion SE. Same color. A little bit of making fun of Sync. Sync has connected to your phone, and is reminding you, that 911 assist, is set to off.
Looks to be in good shape for an old car
I wonder if you could just leave it out or pull a fuse for it? I’d hate to have to do it again in the future.
This is the one I bought and 3rd Ford and this video is what taught me how to work my fogs 🤦🏽♂️….always thought they didn’t work lol
What is that thing called that you used to break the bead?
It’s called a bead breaker. This one is from Harbor Freight for $55
thank yo so much i just bought this car and needed to know this thumbs up
What do you think of it so far? I'm looking to get one too
Is blutooth available
Yes
@@seans7788 does this car have a backup camera
@@justsimplytrash6703 unfortunately not. 2010 was just a bit early for that
@@seans7788 i just bought one and mine has a rear backup camera, it appears on my rear view mirror
@@seans7788 Do you know how I turn on the heated seats? I just got a 2010 yesterday and the guy I bought it from had it on for me but I wasn't smart enough to ask how you turn it on haha. I went out yesterday to take my mom for a ride in it and can't find it. I haven't had any luck finding a video on it so far. Was hoping this one would show it, but unfortunately not. lol
Best explanation of car I am watching to buy this 2010 car for me
The ambient interior lighting will turn on lights on the driver, passenger, and rear floors as well as around the cup holders. You can also cycle through colors. Very cool feature
Does the se model 2010 have ambient lights
@@matro951 yes
That & my sunroof( which i didn't noticed til i got home) was Lit!...
@@redpilljudahite7402 damn, makes me wish mine had a sunroof!
@@seans7788 I'm watching a dude who upgraded his 2011 fusion with LED's, back up camera & stereo🔥
Great help! Thank you, sir.
nice job
Thanks . Helpful for new owner of ford fusion.
Hey, great video! Do you have any suggestions to allow the blade to turn left or right. Mine has a very difficult time, I've greased the rod, and still it's a challenge.
Sorry about that. Mine works pretty freely. There are several moving parts, so you need to investigate each one individually. I would suggest disconnecting the rod that connects the handle to the blade. Then clamping the handle down that releases the blade pivot. Finally, rotate the blade left and right by hand, to see if it moves freely. It should pivot easily. My pivot plate is fairly loose on top of the channel. It can move up and down an 1/8 inch at the back if I lift on the blade. When you find the binding part, it will need to be made looser or be lubricated. Good luck
@@mikeewatkins Hi Mike, thank you for your help! I appreciate it!
I have a Craftsman with the same type setup and had the same issue over the years. if you are still have problems this season with it being hard to change directions hold the hand lever in and check to see if the position locking lever controlled by the cable on the 3 position pivot at the lower end is completely clearing out of the position notch while being in the center position, if not loosen the (2) 1/2" lock nuts and adjust them lower on the threads one turn at a time towards the lower end of the cable until you can move the plow easily in either direction, always worked for me.
@@Serpico1152 Hi Carmine, thanks!
@@alwaysbeeurselfHey, I was running out of adjustment on those lower 1/2" lock nuts and having difficulty with the plow angle operation today but after careful analysis I removed that 3/4" long round spacer with the 1/4" bolt (he touches it @ 3:11) where the cable end mount attaches to the plow arm then re-installed the cable end mount directly to the plow arm (without the spacer) using a shorter bolt and it is a definitely a fix while It gives you probably up to another 1" of tightening adjustment on the cable. I had to loosen the lock nut bracket and turn it slightly further downward so it would be in a straighter alignment with the cable end to not put wear on the cable itself moving in and out of the sleeve opening end area, hope that helps you a bit more. I always enjoy redesigning things to work better while cursing at those engineers left and right who designed them in the first place.