Відео

It's a 4s lipo battery and it gives 16.8 volts when it is fully charged

This motor is (t motor as2820 880kv bldc) and it gives about 2.7 kg thrust on full throttle and it consumes about 44amps on full throttle .

One more new type of VTOL is ready and this time I will also upload a full making process.

Desperately waiting for it....!

​@@AeroRoboticx.360what is your WhatsApp number? I want VTOL

Brother it's mavic mini

You are right 👍 brother motor should be opposite to cancel torque but plane can also fly with the same direction I have fly plane with the same direction many times and it works without causing any problem.

The motor is about 304 g

Brother you can use kk2.4.8 flight controller it doesn't have autonomous features but has good stability and good price and uses 3 cell system for battery and motors and ESCs. But if you are good in programming you can make it more price effective by using iot boards like nodeMCU which can also serve as transmitter and receiver and at the same time as a flight controller . But it needs programming skills but the results are amazing.

Yes I have seen this video frame by frame. Maybe next time I will use a carbon fiber rod for the tail boom

If you are flying a small model then you need to find a big ground but if model is big then the best option is out of city.

I always remember those days when I made a beginner small plane and it crashed but it gave me a lot of information about why it crashed. Nowadays when I make 4 - 5 feet wingspan planes I have enough confidence in it that I fly them in many crowded places. Now it's my step towards big planes and this crashed plane gives me a lot of information and experience but not everyone can understand it everyone has it's own point of view some people consider it failure and some consider it a step 🪜 towards the success.

Thanks a lot to all brothers these are the healthy advices which we expect from a creative communities and we can't find them in our surroundings.

After crash Condition is looking very dangerous but thank god everything survive the most critical thing is its battery but I covered the battery in soft and phoras foam sheet before putting it in plane so it also survive but I need to check it's crashed flight controller in small model before using it in big one.

@@AeroRoboticx.360 Heck yes! great idea you had to use the foam. batteries cost many $. sweet videos and thanks for responding.

It's weight is about 7.7 kg and it was able to fly even with only 2.5 kg Thrust but for it we need a long runway. But I had used 11.4 kg of Thrust which is extremely high thrust according to its weight. I always try to do something different. Fun fact this aircraft can easily fly with single motor but I had used two motor because it increase it's flight time because for example if a single motor produces 4 kg Thrust at 20 amps then two motors produce 2kg + 2kg at 8amps + 8amps so total 4kg thrust at 16 Ampers which is more efficient as compare to single motor. But don't try this method in drone 😵 it's only work for planes.

@@AeroRoboticx.360 interesting. but concerning thrust how do you "dial" from 2.5 to 11.4 (you could lower battery voltage ? ) because on the vid your bird just self-destroyed 😶

Thank you 😊

Thank you brother thank you so much.

I am seeing that you put a lot of effort for giving that comment to give me good suggestion thank you for that but in your comment you said that I use a tail wheel which makes the tail heavier but I use the wheel on tail because I want to attain a configuration like bush plane so then my plan will be able to take off from very small runway and you also said that the servo on tale and wheel on tail will affect the CG but actually it don't affected because CG was calculated after everything assemble on the tail and if I assemble servo in feasulage then I need to use long rods to connect servo and vtail and as the length of rods increase the bending effect of rods also increase which decrease the moment arm and also effect the angle of vtail that's why I use servo closer to the tail and one more thing you said that tail of this plan is wiggly and you are obsolutely right because it's also one of the main reason of plane crash. actually if you see video on my UA-cam channel you will find that I always make full length feasulage but this time I first time use aluminium road between tail and feasulage and it was not so strong to handle that tail I think I need to use carbon fibre Road next time.

A very healthy comment bro....!

Best of luck for your project. With 2212 1000kv the trainer of about 3-4 feet flies very stable. And if you have any type of flight controller then make sure to use it. Because it is very beneficial for planes and planes fly very stable with gyro. And you can also make gyro stabilization method by using Arduino and gyro sensor.

@@AeroRoboticx.360 Yes for sure. I will try making one using arduino.

Thanks

For this channel

Yes

(Lahore science mela) you can search it

Thank you so much 😊

G inshallah bohat jald is par video banain ge is ka Saman bhi hamaray pass mojood pack para hai. I hope you have subscribed to wetness our future projects.

@@AeroRoboticx.360 insha'Allah may Allah bless you Bhai love from Quetta ❤️🥰👍

G bhai lazmi bnaooo

Thank you so much 😊

The volume of earphones under 70% keeps a man healthy 😂😂 just joking bro actually it's my first video that's why.