RcTechProFlying
RcTechProFlying
  • 83
  • 64 950
Mobula 8 Failsafe, weak signal - Upgrade to new receiver
#happymodel #fpvdrone #whoopdrone #radiomaster #expresslrs #aliexpress
If you are encountering low LQ and weak receiver signal. You may have a damaged antenna on your quad, or, radio transmitter module with a bad antenna. In this video I will show you how to upgrade your receiver in the Mobula 8 quad.
Equipment
Radiomaster TX16S
Happymodel Express ELRS transmitter module
DJI V2 google with analog receiver module with patch antenna + RH Omnidirectional antenna
Quad
HappyModel Mobula 8 Analog version
www.aliexpress.us/item/3256806801916994.html?spm=a2g0o.order_list.order_list_main.15.72a81802nLKbCY&gatewayAdapt=glo2usa
Переглядів: 66

Відео

Happymodel Mobula 8 FPV flying
Переглядів 6028 днів тому
#happymodel #mobula8 #fpv #dj Googles used DJI V2 with analog module Transmitter Radiomaster TX16S Receiver Express LRS Analog Runcam Ant camera
Mobula 8 Whoop drone Mods
Переглядів 2722 місяці тому
#mobula8 #microdrone #fpvdrone #happymodel #expresslrs #dj #drone #aliexpress I thought it be a good idea to produce this video to help you add a little insurance to help locate your drone. What are the chances of finding your drone in tall grass or a tree? By adding a buzzer with an equipped battery, you will have a better chance of locating your Micro drone. And of course, with ejected batter...
Speedy Bee Master 5 V2 test flight
Переглядів 693 місяці тому
Speedy Bee Master 5 V2 test flight
Christmas in Williston FL 2023
Переглядів 349 місяців тому
#dj #mini3pro #djimini3pro On this video shot of the Town of Williston in Northern central Florida I used the DJI Mini-3 Pro. Day time flight I used a Freewell 128 ND Filter. No Video editing was done to this video what you see is what was what you see. 4K @ 30 FPS
3D Printed Stormbird RC Plane "Crashed my plane."
Переглядів 187Рік тому
#stormbirdrcplane, #3dprinted, #rcwing The credit belongs to creator of this wonderful design. www.thingiverse.com/thing:6174038 Aircraft Equipment Propeller 8X5 designed for AR Wing Pro SunnySky 2216 1400KV Motor sunnyskyusa.com/collections/x-v3-motors/products/sunnysky-x2216-v3-brushless-motors-long-shaft-version?variant=31960521539678 9 Gram Servos www.amazon.com/MG90S-Servo-Digital-Servos-H...
AR Wing Classic TBS CF model
Переглядів 49Рік тому
#arwingclassic #fpv #runcamthumb #tbscrossfire #radiomastertx16s On this flight I was running the Runcam Thumb 1080P with the NR filter no editing on the video. This video is Straight from the Runcam Thumb camera raw.
FX-61 Wing 1st flight with Runcam Thumb
Переглядів 68Рік тому
#fx61wing #fpv #speedybee #tbscrossfire Enjoy flying this 1200MM wing with plenty of room in the fuselage bay area. This wing floats in the sky when you shut the motor down for longer flights to save your battery. On this flight I have a DYI Lion battery 4S 2P @ 8000 Mah. I smart audio the VTX to switch from 100 ma - 1000 ma, works great!
DJI Mini 3 Pro ND filter test
Переглядів 60Рік тому
#djimini3pro #djidrones #freewell DJI Mini 3 Pro tested the Freewell ND 256 in full motion video and picture mode. Amazing results seeing the difference slowing down the shutter speed using an ND filter. My next test will be Hyperlapse with a higher shade ND filter. These ND filters work best with subjects at closer range in pictures. Smooth images on videos. Camera @ 4K 30 FPS and the regular ...
DJI Mini 3 Pro Cine mode After New DJI Firmware update 1.9.9
Переглядів 412Рік тому
If you’re interested in making your video shots look professionally cinematic, make these changes to your settings on your DJI Mini 3 pro. #djimini3pro #djimini These setting were done on the RC N1 controller. All images and videos have not been touched through post. Video/Camera done off a IPhone 12
DJI Mini 3 Pro Active Track Failed!
Переглядів 86Рік тому
#djimini3pro #djidrones After making several tests to determine how well the active track works. I discovered that the software needs some work. DJI Controller RC-N1 with Iphone 5 as display
DJI Mini 3 Pro Hand Launch
Переглядів 117Рік тому
How to hand launch your Mini 3 Pro #djimini3pro www.amazon.com/DJI-Quadcopter-Controller-CP-MA-00000488-02-Protection/dp/B0B5JZ8VC2/ref=asc_df_B0B5JZ8VC2?tag=bingshoppinga-20&linkCode=df0&hvadid=80333201323909&hvnetw=o&hvqmt=e&hvbmt=be&hvdev=c&hvlocint=&hvlocphy=&hvtargid=pla-4583932719950285&psc=1 www.dji.com/mini-3-pro Camera Gear Iphone 5 RC-N1 Remote Controller Cell Phone for Remote IPhone 12
DJI Mini 3 Pro Mild range test
Переглядів 150Рік тому
DJI Mini 3 Pro Mild range test
#dronereview Which Drone did I buy?
Переглядів 18Рік тому
#dronereview Which Drone did I buy?
AR Wing Classic #fpv
Переглядів 352 роки тому
AR Wing Classic #fpv
Skynetic Havok defective ESC
Переглядів 722 роки тому
Skynetic Havok defective ESC
#Skynetichavok Aileron control surface horn mod
Переглядів 512 роки тому
#Skynetichavok Aileron control surface horn mod
#ARWing Stuck in a Tree
Переглядів 113 роки тому
#ARWing Stuck in a Tree
Skynetic Havok Racer Crash! Why? #skynetichavok
Переглядів 3733 роки тому
Skynetic Havok Racer Crash! Why? #skynetichavok
#SkyneticHavok Making the FPV + Why broken props?
Переглядів 1383 роки тому
#SkyneticHavok Making the FPV Why broken props?
Skynetic Havok Special #motionrc
Переглядів 1163 роки тому
Skynetic Havok Special #motionrc
Skynetic Havok Racer #Zohdkopilot #motionrc
Переглядів 1733 роки тому
Skynetic Havok Racer #Zohdkopilot #motionrc
#Motionrc #SkyneticHavokRacer
Переглядів 1223 роки тому
#Motionrc #SkyneticHavokRacer
#F22 #Raptor #64MM Maiden Flight FPV
Переглядів 873 роки тому
#F22 #Raptor #64MM Maiden Flight FPV
#F22 #Raptor #64MMEDF #4S #highperformancebuild
Переглядів 323 роки тому
#F22 #Raptor #64MMEDF #4S #highperformancebuild
#F22 64mm EDF Raptor RC Jet unboxing #Freewing
Переглядів 1963 роки тому
#F22 64mm EDF Raptor RC Jet unboxing #Freewing
#fpvwing Phantom FX 61 Wing
Переглядів 1683 роки тому
#fpvwing Phantom FX 61 Wing
#DIY RC Plane launcher #rcplanelauncher
Переглядів 1,3 тис.3 роки тому
#DIY RC Plane launcher #rcplanelauncher
FX 61 Crash ZOHD KOPILOT
Переглядів 1,8 тис.4 роки тому
FX 61 Crash ZOHD KOPILOT
3DR Solo Battery Mod add switch
Переглядів 6374 роки тому
3DR Solo Battery Mod add switch

КОМЕНТАРІ

  • @tonymcclendon-hobbytime7727

    Successful test run. Love the flight area. No karens nearby. 😅😊

  • @tonymcclendon-hobbytime7727

    Long live the Solo....2023😊

    • @rctechproflying1903
      @rctechproflying1903 Рік тому

      Awesome! Great to hear you have a Solo. I've enjoyed flying the Drone. I still have one and plan to keep flying it.

  • @June4600
    @June4600 Рік тому

    I’m not sure if I ever gave thanks on your 8 part series, if not I gota give a big thanks to you. Back in 2018 I was trying to figure out if the motors could be taken apart from the esc and I came across your videos. It was my first attempt at doing this procedure and my first time ever soldering. I practiced soldering first. I ended up purchasing T-Motors. Again these videos are much appreciated and has helped me out a great deal thanks 👍🏼

    • @rctechproflying1903
      @rctechproflying1903 Рік тому

      Glad to hear that you got some information from my videos. I sold my main Solo with the upgrades. I still have another one to tinker with for experiments. Take care God bless.

  • @kevinjackson1721
    @kevinjackson1721 2 роки тому

    can you give me pointers on how to make my own battery for my 3DR SOLO drone please?

  • @soloalpinist
    @soloalpinist 2 роки тому

    Have the motors still held up? Any problems? Thanks!

  • @SilverTopFlyer
    @SilverTopFlyer 2 роки тому

    Greetings sir I pray that you are well, I am the Silver Top Flyer, so here we are 3 years in the future. I have just flown my maiden cinematic flight this past Sunday, I got to say the 3dr is a beast Managed to find her with 3 flights on her, her price was 140 bucks back pack 3 batteries transmitter GoPro . Sweet deal. I got to know are ya still flying her ? I have watched the mods you did .... awesome!!!!. Gimme a yell sometime

    • @rctechproflying1903
      @rctechproflying1903 2 роки тому

      Great deal on the Solo, I haven't flown my Solo for several month, But I've had the urge to fly it again. I need to purchase another 5200 Mah battery for some more fun. You will enjoy the bird. Thanks for the comments. Take care God Bless,

  • @jerodlyford10
    @jerodlyford10 3 роки тому

    Great video. Right to the point.

  • @keveshannaidoo5670
    @keveshannaidoo5670 3 роки тому

    Hi,did you make that video explaining the calibration procedure?

  • @pingpong229
    @pingpong229 3 роки тому

    Newbie here(just got mine used and I like it!) but I have a battery that's showing a full charge but when flying, drops to critical level with the minutes? Advice? Also, I understand the 3DR app no longer works. Is there another one that will or bite the bullet for the Solex? Tks.

    • @keveshannaidoo5670
      @keveshannaidoo5670 3 роки тому

      I'm having the exact same issue buddy,any ideas?

    • @keveshannaidoo5670
      @keveshannaidoo5670 3 роки тому

      I'm not too sure but drone worship vlogs did say something about calibration but obviously he's only in this for the money so he wouldn't say..?

  • @keveshannaidoo5670
    @keveshannaidoo5670 3 роки тому

    Did the mod,but however I'm not sure if my new battery has an issue or its a bms issue...the battery literally lasts for 2 mins then auto lands ...did the exact same thing with my original battery

    • @rctechproflying1903
      @rctechproflying1903 3 роки тому

      Sound like the BMS is holding last memory on the last battery you used. Are all the LED lights showing a full battery charge?

    • @keveshannaidoo5670
      @keveshannaidoo5670 3 роки тому

      @@rctechproflying1903 thanks for your reply!,yes all the lights light up showing as fully charged but the drone flies for literally less than 3 mins, the battery I got is brand new as well,as soon as it hits 29%(after 2 mins of flight ) it auto lands ,yet my battery still has like 50 %+ of life left

    • @keveshannaidoo5670
      @keveshannaidoo5670 3 роки тому

      Any advice on what I could do?

    • @keveshannaidoo5670
      @keveshannaidoo5670 3 роки тому

      God bless ,please help

  • @Scotian280
    @Scotian280 3 роки тому

    Keep practicing, long way to go but you can do it!

  • @thomast8041
    @thomast8041 3 роки тому

    Hi nice video. By any chance you have a video clip step by step how to set up the solex app to connect to the solo and controller. I did download the solex app and have a hard time to connect the app to the vehicle. Please help if you are able to. Thanks

    • @rctechproflying1903
      @rctechproflying1903 3 роки тому

      What kind of problems are you having?

    • @thomast8041
      @thomast8041 3 роки тому

      @@rctechproflying1903 after download the solex app on my phone, it won’t connect to the vehicle. It kept saying looking for vehicle. Are you able to help me with better instruction how to set it up? The solex app doesn’t seem to have any instruction after app is downloaded. I am using my old android phone that has android 6.0

  • @droneready8278
    @droneready8278 3 роки тому

    ...nice that you covered this ...most reviewers think that the rear obstacle avoidance sensors don’t work or only “alert” the pilot...when the actually do work as long as novice mode is activated.

  • @droneready8278
    @droneready8278 3 роки тому

    Gave you a sub...good channel content and nice modifying.

  • @thomast8041
    @thomast8041 3 роки тому

    Hi There, I have a couple bad 3DR solo battery that are in a bad shape. I am not good at soldering and wonder how much you will charge to have one made; so I can use it with Lipo battery.

  • @ITExplainer1
    @ITExplainer1 4 роки тому

    Hey man can I take a clip of your video . I have to make a video on the internet and I need some clips like this.

  • @camhawkes5361
    @camhawkes5361 4 роки тому

    watchout those edges are sharp, screwdriver slipped cut my thumb pretty good lol

  • @toribiofilmz4450
    @toribiofilmz4450 4 роки тому

    Hello, what is the name of the program you are using in the video?

  • @MrRafael2787
    @MrRafael2787 4 роки тому

    Hopefully you can help me out, my gimbal is none responsive, it has a orange light on and when I look at my settings in the app, there is no version number for the gimbal. Can I set an update with mission control?

  • @llspragulus
    @llspragulus 4 роки тому

    Hey RCTech, I know this video is older and you may not rememeber but, I was curious how the batt replacement went and how long of fly time you got with the rig? I have 2 bad batteries that I was thinking about doing a 10440 mod to. Was curious seeing as though that 4k mAh batt you had was most likely lighter thus equaling better/worse flight characteristics or longer flight time. :) Thanks in advance!!

  • @charlieaerialinspections4660
    @charlieaerialinspections4660 4 роки тому

    Great stability

  • @timcardoni4907
    @timcardoni4907 4 роки тому

    I want to compliment you on your videos as I find them very informative. I was wondering though if you have a video that covers the installation of your mini toggle switch that replaces the factory power button on modded back? As I have to do the same and am not sure exactly how to hook it up. You're input would be greatly appreciated!

    • @rctechproflying1903
      @rctechproflying1903 4 роки тому

      Sure, I could create a short video showing how to install.

    • @timcardoni4907
      @timcardoni4907 4 роки тому

      Thank you so much!! I will be looking for it! 🙂👍

    • @rctechproflying1903
      @rctechproflying1903 4 роки тому

      @@timcardoni4907 ua-cam.com/video/4nvL0bNjYHw/v-deo.html

  • @Primetiime32
    @Primetiime32 4 роки тому

    any information on why mines wont move forward?

  • @guglielmodicarlo4139
    @guglielmodicarlo4139 4 роки тому

    are there any batteries that can be put back inside to make it look original? not a fan of that set up , im sure it works fine, but looks terrible

    • @rctechproflying1903
      @rctechproflying1903 4 роки тому

      South West Florida Aerial Good Morning, yes, there is. You could order them from China, and they are sold by individual cells. The only draw back is the cost. Shipping cost can get expensive. I would of loved to reseal the original batteries in there cases. When I find the link I will send it to you.

    • @guglielmodicarlo4139
      @guglielmodicarlo4139 4 роки тому

      @@rctechproflying1903 thanks I appreciate it

    • @rctechproflying1903
      @rctechproflying1903 4 роки тому

      @@guglielmodicarlo4139 www.lipolbattery.com/

  • @rickwinjester9706
    @rickwinjester9706 4 роки тому

    Hi,I have a couple dead 3dr solo batteries. Would you be interested in modding a couple of my batteries?Thanks Rick I would of course pay for it.

  • @rickwinjester9706
    @rickwinjester9706 4 роки тому

    Hi,I have a couple 3dr solo batteries that are bad.Would you be interested in modding them for me so I can keep flying? Thanks Rick

    • @rctechproflying1903
      @rctechproflying1903 4 роки тому

      Hello Rick, How many batteries do need to be done? Rolando

    • @rickwinjester9706
      @rickwinjester9706 4 роки тому

      @@rctechproflying1903 I have 3 that I would like to have done. I'm very impressed on your knowledge about these batteries. I love my 3dr solos. What are your thoughts for pricing and we should communicate other than UA-cam. Thanks so much Rick

    • @rickwinjester9706
      @rickwinjester9706 4 роки тому

      @@rctechproflying1903 I have 3 batteries that went bad,very disappointing. I hope you can help us, thanks

  • @WmrLicona
    @WmrLicona 4 роки тому

    friend this video if it is with the Lipo LIHV battery?

    • @rctechproflying1903
      @rctechproflying1903 4 роки тому

      Jasson Licona yes, correct

    • @WmrLicona
      @WmrLicona 4 роки тому

      @@rctechproflying1903 an idea I don't know if it is correct that if this battery instead of going upstairs can uvicate with something in the bottom behind the gimbal it is only.

  • @tonymcclendon-hobbytime7727
    @tonymcclendon-hobbytime7727 4 роки тому

    Great flight and battery info

  • @tonymcclendon-hobbytime7727
    @tonymcclendon-hobbytime7727 4 роки тому

    What app are you using on the solo. It has the same functionality of the lithia app. I Use on my phantom 2 vision plus.

  • @tonymcclendon-hobbytime7727
    @tonymcclendon-hobbytime7727 4 роки тому

    Thoroughly enjoyed your video

  • @tonymcclendon-hobbytime7727
    @tonymcclendon-hobbytime7727 4 роки тому

    Had me sweating there for a minute. Good recovery. Good to see the grandson enjoying the hobby as well

  • @tonymcclendon-hobbytime7727
    @tonymcclendon-hobbytime7727 4 роки тому

    Nice lens mod. Thanks for sharing

  • @tonymcclendon-hobbytime7727
    @tonymcclendon-hobbytime7727 4 роки тому

    Got my attention. Following now. 3DR solo for life.👍🏽

    • @devin2494
      @devin2494 4 роки тому

      Yes!! Sad they got shut down. I love my 3dr solo

  • @WmrLicona
    @WmrLicona 4 роки тому

    friend what types of adapters or connectors should I buy to assemble the cables

    • @rctechproflying1903
      @rctechproflying1903 4 роки тому

      Hi Jasson, on the bottom of this video I have provided links to places I have purchased the connectors. Some of the stores may not show the parts available in there store on Ebay. copy the description and find ours that sell them shouldn't have any problem finding them. God Bless,

    • @WmrLicona
      @WmrLicona 4 роки тому

      @@rctechproflying1903 thanks my friend what kind of battery do you recommend

    • @rctechproflying1903
      @rctechproflying1903 4 роки тому

      TATTU 5200MAH 4S 14.8V 15C LIPO BATTERY GENS ACE. IF YOU GET THE 35C YOU WILL LESS FLIGHT TIME. AVERAGE FLIGHT TIME ON THE 15C 12 - 15 MINS ON THE 35C MAYBE 10 MINS

    • @WmrLicona
      @WmrLicona 4 роки тому

      @@rctechproflying1903 thanks: friend a question and watch the video but just to clarify the 5 small wires that ban in the white connector have to be assembled in the same order as it is in the original battery

    • @rctechproflying1903
      @rctechproflying1903 4 роки тому

      @@WmrLicona Correct, make sure that you pay attention to the notches on the JST plug when you connect them together that the wires are in the same sequence. Don't always think that the colors are matched to the same colors wire for wire.

  • @WmrLicona
    @WmrLicona 4 роки тому

    friend a question with these batteries will I still have the alert when the battery is already discharged or not?

    • @rctechproflying1903
      @rctechproflying1903 4 роки тому

      If you have created the Mod battery system from the Solo Battery you will get the alert that the battery is lower, because the BMS is remembering the last call that the battery was low. You need to charge the lipo battery on a separate charger, then plug it back on the BMS. What occur is that the BMS clears the memory and starts at 100% when you plug your lipo back into the BMS. I was planing on flying the Solo this week God willing, Then I could record a simple video. God Bless friend!

  • @megandrannaidoo4102
    @megandrannaidoo4102 4 роки тому

    Can it charge with the original solo charger?

    • @rctechproflying1903
      @rctechproflying1903 4 роки тому

      Yes absolutely, What I've discovered is the voltage from the Solo chargers are not consistence with each other. Some will read 16.80v and some less then 16.5 V. When I used the Solo chargers it seem as though it stops charging the battery before its fulling charged. Since I have used the Imax charge i get a complete charge from my batteries.

  • @ErikPAPATIE
    @ErikPAPATIE 4 роки тому

    This tower dont have any light beacon is not legal by faa

    • @Dennco2000
      @Dennco2000 4 роки тому

      It's legal, upon construction the FAA determines if it requires lighting and what type of lightning.

  • @eddyfree33
    @eddyfree33 4 роки тому

    Can you please tell me the default values . I didn't hear you mention that in the video. Now I see in the comments but too late. I thought there would have been a reset but no. Hope you get this I realise this vid is old. Thanks

    • @rctechproflying1903
      @rctechproflying1903 4 роки тому

      I parameters are different on each 3DR gimbles. If you set them to what I have it may not work correctly. This video is to assist on a bench mark to make slow adjustments and test them and review your results. Cheers!

  • @malcyjb
    @malcyjb 4 роки тому

    The front sensors are optical the rear sensors are ultrasonic, this is why... as for why the rear sensors don't work apart from Novice mode there must be a reason however to have the option would be good.... Cheers

  • @infotechsailor
    @infotechsailor 4 роки тому

    Warning loud ass wake your kids up if youRe watching this video in bed on low volume incoming wake your baby and your neighbors baby and piss off your wife @0:57

  • @MrBmw2444
    @MrBmw2444 5 років тому

    That needs to be modified to allow more user freedom.

  • @gdhall5311
    @gdhall5311 5 років тому

    Good info Rolando, is there a way to set the vertical speed?

    • @rctechproflying1903
      @rctechproflying1903 5 років тому

      Haven't explored that area of the drone yet. Are you thinking in the novice mode? Or normal mode?

    • @gdhall5311
      @gdhall5311 5 років тому

      @@rctechproflying1903 Normal mode.

    • @rctechproflying1903
      @rctechproflying1903 5 років тому

      @@gdhall5311 I will make some test and let you know.

  • @FloydVincent12
    @FloydVincent12 5 років тому

    You are excellent at presentation!

    • @rctechproflying1903
      @rctechproflying1903 5 років тому

      Thank you Floyd, not only a UAV pilot, but a Pastor for a church. Have a bless day.

  • @rctechproflying1903
    @rctechproflying1903 5 років тому

    10/15/19 1800 wanted to let you all know that I have made the adjustments to the EXPO in the Autel Evo app from factory settings from 0.50 to 0.20 and the results were very good. I will be posting the video on the settings and the results.

  • @gdhall5311
    @gdhall5311 5 років тому

    Good job Rolando, I have had my EVO for almost a year now and I really enjoy it but I still fly the Solo as well. I was able to get two of the battery modes from Dan (Drone Worship) and I use the Tattu 5200mAH 35C battery that works great. God bless you and keep the videos coming.

    • @rctechproflying1903
      @rctechproflying1903 5 років тому

      Nice to hear from you...I agree that the 35C discharge would work better. So far love the Evo....Thanks Gregory. God Bless.

    • @stevedawson3863
      @stevedawson3863 5 років тому

      Dan from Drone Worship is a good man. Tell him Steve Dawson said hay. Glad to see more Solo pilots out there.

    • @rctechproflying1903
      @rctechproflying1903 5 років тому

      @@stevedawson3863Absolutely Steve, I enjoy the 3DR Solo aircraft and its electronic circuity design I will always seek to find new methods to keep the bird flying. I will let Dan know Thanks.

  • @JoseGarcia-pt1iw
    @JoseGarcia-pt1iw 5 років тому

    Engineer I follow all your 3 video series , and work 100% in my Solo with a 14.8V 5200mah, I will try soon with a 14.8v 10000mah battery, I know that need a firmware mod for it 🙄😅. I use glue buster to open the Solo battery 😁

    • @rctechproflying1903
      @rctechproflying1903 5 років тому

      Only problem with the 10000 mah lipo is the weight, and the BMS will not recognized anything greater then 5200 MAH, but if you monitor the voltage on the Telemetry on your display you could fly the Solo and ignore the low battery warning.

  • @buildingjmpr67
    @buildingjmpr67 5 років тому

    Hey there, so you say to make the adjustments but you don't say what to adjust it to? My gimble faces Downwards and while flying it's all over the place. Do I make adjustments in planner and watch gimble until it's level or what?

    • @rctechproflying1903
      @rctechproflying1903 5 років тому

      Make the adjustment on the ground in Mission Planner, and make sure to remove the propellers. When in mission planner make the adjustments needed on the function of the gimble that the problem is needed to make the fix. Example: If the problem is the pitch select the pitch and make the adjustments by lowering the values or increasing the values. If the problems is the Roll select make adjustments and lower or increase the values. Always write down the values that Solo has as default so that you could return it to those values.

    • @buildingjmpr67
      @buildingjmpr67 5 років тому

      @@rctechproflying1903 thanks a lot, great videos by the way!

  • @JoseGarcia-pt1iw
    @JoseGarcia-pt1iw 5 років тому

    Thank you very much, I do it and work 100%, you are an excellent professor!!!

  • @JoseGarcia-pt1iw
    @JoseGarcia-pt1iw 5 років тому

    Excellent!!! Thank you!

  • @jackhammell1926
    @jackhammell1926 5 років тому

    Uhm, I gotta ask the obvious question. Other than the zoom is it any different than linear view?

    • @krajca666
      @krajca666 5 років тому

      with linear mode you get digital zoom(so you're loosing a bit of quality), with exchanged lens you get optical zoom. You can use the whole sensor for the same field of view as linear and that means you'll get better quality image.