Відео

Do yourself a favour and do *not* have the battery connected when you are taking the disc on or off. If you inadvertently get the start button engaged it won't be a happy time. I really like your one because it has a huge "button" to lock the disc when tightening and removing the disc. My one has a small button that is smaller than the 10 cent piece and is a pain to locate, press and hold with my tiny hands. I hope mine breaks within the next three years while it's still in the warranty period. If you didn't get an Electronic Receipt from Bunnings then I suggest you take a photo of the receipt because they use thermal paper and even when stored in a dark location the printing on it can "disappear" and you no longer have proof of purchase if the tool has a warranty issue within the 5 year warranty period. (At times Bunnings has Ozito Specials and I just purchased *4 x 4Ah* batteries for *$129 ( I/N: 0595324 )* and there may still be some available. These batteries normally cost $69 each so that is a big saving and the angle grinder like to go through the batteries if you have a bit of use for it. Nice to have extra batteries especially if you have other Ozito 18v tools.) If you are a paranoid safety freak like me there is also an "enclosed" guard that is used with a cut-off disc. It is available from the Bunnings Special Order desk. *Ozito PXC 125mm Angle Grinder Cutting Guard PXACGA-125* and the stock number is *I/N: 0540028* and costs *$14.98.* You can search the Bunnings site with either the name or I/N number if you want to have a gander at one. I've seen cut-off discs shatter and this provides a bit more protection than the guard that it comes with. If you have a Concrete Grinding Disc then you may need a better Wrench to be able to undo it. I found the Concrete Grinding disc has a deep "cup" and the stupid little wrench they provide (which can vibrate out of the handle) doesn't have the reach for the Concrete Grinding disc that I have. If you search eBay for 8" Angle Grinder Universal Adjustable Pin Wrench 10mm-50mm Nut Spanner Red New you find one that will be more than sufficient for you needs. As of 1 August 2024 they start at around $6.85 and it's better than the one I paid $6.99 for two years ago. *Thank you* for the video and it's real good to know about the larger locking button on them. 👍

The only important part of this video is where to get the replacement spring and you don't say?

Thanks mate, its a useful video

Excellent! Thanks

On my 2012 Mazdaspeed 3 is easier, just unplug , now the turning signal bulb is really.hard, but i want to replace this little one with led bulb and i cant find the number,if someone knows plzz help

After spending an hour I came across your video. And it got the top off! Thanks a lot!

Thank you! I flooded my sink and the water ran down the dishwasher to the bottom tray and tripped the flood switch. I literally pulled out the sides to fix that 😂 but then couldn’t get the sides back on and couldn’t slide back into the space. Couldn’t find a video to get the lid off. You have saved me thanks!

What a dumb system!!!?

Thank you very much.

I have two of the same monitor, they're both able to Display Port Output... Will this still work?

Is he using hot, warm or boiling water, i dont think he explained

wtf is that. Where are the details?

Are you kidding meeee you can just daisy chain these things??? Can you do with an HDMI? or only display port? thanks

Thank you!

A2031 kulaklık A2032 kutusunda şarj olur mu

Nice! Thanks man! DisplayPort seems to be the key. Great info. Thanks again.

come on, why having usb-c when u also need to use power cable also.... lets think...

Short to the point, thanks! Daisy chaining explained easily.

Thanks dude it actually worked. I used the end of my dough rolling pin to hammer back in place top white part into the clue thing that on the outer cause it would stay in place and kept popping out

Any special tools so you don’t mess up the headliner

thank you lol

Is it necessary, that the Computer Supports Thunderbolt Protocoll, or is it enough, if it has a Type-C 4.0 DP Output?

Thank you

Is this have fade 1.5 or 2.5 or 3.5? Or it's just number of 12345

Thanks for the video. I had to replace my Shark Fin antenna for a Kia Carnival. Kia spare parts wanted $556 for the part plus $540 to install (They said it would take 3 hours) I got a second hand Shark Fin antenna on ebay for $65 and with the help of your video it took me only 25 minutes to install. Thanks again.

Thank you for the video, now finally parking mode on my A119 Mini is working.

What do I do if I do exactly this, but one of the monitors won’t turn on. It’s been driving me insane I can’t figure it out

I am having that same issue. I hope i’ll be able to fix it soon.

不错呃

thank you straight to the point

what the fuck

when you say replace the battery, do you mean the car battery or the battery on the key fob?

Thank you so much. Watched various videos that totally skip over this first rather important step to fixing the problem I'm having. Much appreciate your help.

How easy was it to reattach?

I just come in from my car ... changed both headlights that were dead perhaps because of the cold days. But the positionlights brought me to wonder how to change them, because my hand doesn´t fit into this slot. My Question: In your video at 0:59 ... Do you turn it to the left or do you just pull it out??? And by the way do you have an idea how to change the license plate lighting at the backside?

Thank you. Did you release the side panels. A rat ate my inlet hose and I need to change it. 😀👍

0:41 error here as you should use the orange display out port

Interesting. The manual states this shouldn’t work on the P version, only the U version. (P version works if computer has display port)

How many in one month, 24/7

I don't have the c port on my laptop

should show up close of case inside too

Type c port on laptop will only work if its THUNDERBOLT TYPE C (for whats shown in video), normal Type C pots are just for charging mobile phones/files etc. and not transmitting video data.

This video is not helpful at all

is possible in macos? .. only windows?

do you mind sending a link for what fuse taps you used?

may i know whether the 1st monitor got Audio output?

Thanks for sharing😊

hey man, thanks for Your video saved me! I have a newer model and the clips are different, but I got the idea from your video! I was getting ready to send it back to supplier and was going to be expensive :)) Thanks!

nice. like the comment before. straight to the point i like that. would this also work if i connect the first monitor via HDMI and than connect the second one to the first one via DisplayPort? i have a HP probook 440 g5 and i 2 dell se2723ds but i cant get a signal to the second one when i connect them one hdmi and second usbc(HP). can you please give me some advice?

straight to the point content. nice!