Відео

I'm trying to upgrade firmware on my Zhiyun Crane Gimbal from 1.10 to the lates 1.60 because the motor has stopped working. Everytime I hit upgrade, I'm getting the same message of "Please use the correct firmware file!" but I got the firmware file from Crane V1 webpage. What is the best way to fix this?

Hello, what kind of cable do you use?

do you go to the water with the kight device atached ?

Doesn't removing the valve(at the end) also destroy the vacuum?

Where can I get version 2.4.2 for the F6 Plus? you have? Because with the latest version my monitor has screen errors with bands and tremors. thanks

how is it in very bright daylight?

Это самый информативный ролик об этом стабилизатор. Автор наглядно показывает процесс подготовки стабилизатора к работе. Это отличная демонстрация мастерства ввсого класса автора учебного материала. Создан прекрасный видео учебник для изучающих мастерство операторской работы и образец подражания для снимающих обзоры на разную технику.

what do you need the gloves for?

how do you upload the luts to it or where can i find a manual on it i cant find a F6 pro version, it seem like everybody has the F6 Plus

very, very helpful. thanks

I have the smooth 5 but some problems with the firmware can I do it the same way like this

can I use the TG6 on this housing?

what is the lastest version of it?

Hello from Greece. dont i press the calibration button at the IMU calibration interface? thank you

Hi, my zhiyun smooth xs is not working when i power it on, as per thr manual, it does not turn on the blue light for pairing, instead a flashing red light is showing, Please help me out

Thank You for the info. You are the best.

How to balce phone in vertica model??

I followed these instructions and it worked my firmware is now v3.2.4 however I can no longer see the markers for the Grids on screen. Which I use regularly when shooting. Any advice? Is there a way to downgrade the firmware?

hi i from Brazil, do you have video smooth 5 and 5s, 6 six steps calibration? i very dificult calibration smooth 5 and 5s and this moment

Whats great about it is while its 1600 nits, it can still be powered via USBC, unlike other bright models. Thanks for the video!

This was terrible

useful!

Does anyone know if this gimbal is compatible with Panasonic LUMIX G95/G90 cameras ?

I just got one of these second hand and I'm pretty impressed. Can you have the automatically rotate to follow a subject?

Can you do this for g6 max? Theres no visible screws for the motor

Got it from B&H for 299$ I thought it was great deal at first. Then the nightmare came along with the Crane 2S. No matter what I try it just won't let me activate it. what frustrating me even more is the customer service. they asked me to send them a video of it shows me their lack of knowledge of their own product. now I know why a 599$ Gimbal at a 299$ Discount. It's returned BTW

It should be hotspot not wifi

Salvou demais! Brazil!

it dosen`t work

How about sony A6300 can be balancing or not in This gimbal. Please replay my comment

Mine does not have a lens tube release button

I bought my lens but arrive without the port. Dont really know how to do it now. Any idea? Thanks!

just bought a hotdog v3 and bun to use with my Crane 3 Lab, and i'm a little disappointed to be honest. The gimbal and slider do NOT sync up, so you program in your waypoints and by the time the slider gets to even the first waypoint, the subject/object is not in the part of the frame that you want it to be. I'm not saying it's completely useless, but it's not good. You can't use it to shoot products expecting professional results. If you want to dolly across to a subject and the pan as you go by, that's not happening. You just dont know when it's going to start the pan. So, you have to do it by hand. If you're going to do it by hand then you're better off buying a cheaper motorised slider. I suppose it would be alright doing landscapes and stuff, but as for in studio. I wouldn't buy one. Also as a side note. I didn't receive a spare belt and thread adapter with mine. The slider comes with a 3/8 thread on it so you can't mount a dslr directly onto it, or even a gimbal, you need a 1/4. Many of the video's you see state that the adapter comes with the slider along with a spare band for the motor, it doesn't. So to buy an adapter you can get a cheap one off amazon for $12/$10, but, once it's tight the camera might not point in the correct direction. To buy an adjustable adapter you're talking an extra £35/$40 for the very cheapest and about £100/$120 for a good one. Just be aware of this. Can I recommend it? Not without a firmware update fixing the sync issue. But my guess it isn't going to be fixed. When the slider came out 2 years ago this issue was highlighted. A firmware update was mentioned as a solution, but it's never happened. If it's not been fixed by now, they aint fixing it. Basically, this is good as a toy or a hobby. The other problem I've found is that if you create a waypoint and then move the slider and create a second, it doesnt slowly move to the second point. It will hit the first point and stay on it until until it moves to the second point, and then jump to that. It would be better if it slowly went form point to poin. That way you can "track" a subject. There needs to be 2 video modes, a point select, and a drag mode. What you actually can do is create a first point and then use the joystick on the gimbal to track the object, as the app records what you do with the gimbal between setting a and b. The problem with that is this, if ive already completed the move by hand, what do i need the app for? The app really is limited in this regards. Be aware of the limitations before you buy one.

I'm an idiot 🤦‍♂ thankyou for this!

Thank you for Sharing this Video 😊😊😊

Can it connect to GoPro 4 black?

Anyone know if it will work with a hero 7 silver??

Lousy thing

Can i use case without buying a pump?

It seems to be out of date. I don't see any Mac OS app anymore. I don't know how to upgrade the Crane Plus now.

❤❤❤ Good 👍 Information Ak2000s ❤❤❤❤❤

Здравствуйте, подскажите как подключить телефон к стабилизатору?

HI THANKS FOR YOUR HELP . BUT I CANT FIND THE FIRMWARE AND THE CALEBRATION UPDATE TOOLS I CAN ONLY FIND THE TOOLS AND IT HAS NO MEANS OR ANY WAY I CAN INSTALL IT TO UPDATE MY GIMBAL , I BOUGHT THE GIMBAL FROM AN IPHONE USER AND MY ANDROID PHONE FIND IT DEFICULT TO CONECT TO THE CRANE 3LAB WIFI AND BLUETOOTH

Hello, I have a problem with my G6. I try to switch on my G6 today, It starts up normally, except that I have nothing on the screen. Have you ever had this kind of problem and if yes, do you have a solution to explain to me. Thanks in advance

Thank you SO much!

Hello I can't connect. Do I have to have the smartphone app open from here or not? 0:37 Do you have to have bluetooth on your smartphone or not? Thanks for the help 🙂

I have adapter like this but it won’t fit with my Hero 7 Black - Mount bracket is little too tight around Hero 7 case!

hello nice video. does it also have optical zoom plewase?

Thank you very much, I've been looking for a long time