- 86
- 217 339
Mountain Desert Farm
Приєднався 13 кві 2023
A collection of videos while establishing our self-sustaining, organic farm.
Always learning and sharing ideas to inspire simplicity.
*Please Note*
Protected by copyright. All infringement will be taken seriously.
Always learning and sharing ideas to inspire simplicity.
*Please Note*
Protected by copyright. All infringement will be taken seriously.
Installing a Tube on Tubeless Honda HS928 Snowblower
The HS928 comes with tubeless tires. These original tires are getting old and the bead is not sealing well, so just to keep them from leaking air we installed a tube instead.
In this video I document what I did. The tube is from eBay and it feels pretty durable. I inflated the tires to 15 psi. Max is 17.
Afterwards I ran the motor since it hadn't been run in a while (hadn't had to use it yet). Like always, this blower started on the second pull. It's been a solid piece of machinery. I am using non-ethanol premium unleaded fuel.
One of the auger pins also broke last time, so I replaced the pin with a Honda OEM. (There are plenty of cheaper replacement pins...I just went with the Honda part.) The other pin still in the auger is not original either... we bought the snowblower used some years ago.
In this video I document what I did. The tube is from eBay and it feels pretty durable. I inflated the tires to 15 psi. Max is 17.
Afterwards I ran the motor since it hadn't been run in a while (hadn't had to use it yet). Like always, this blower started on the second pull. It's been a solid piece of machinery. I am using non-ethanol premium unleaded fuel.
One of the auger pins also broke last time, so I replaced the pin with a Honda OEM. (There are plenty of cheaper replacement pins...I just went with the Honda part.) The other pin still in the auger is not original either... we bought the snowblower used some years ago.
Переглядів: 346
Відео
Installing New Rear Brake Caliper on Mazda Protege5 (DIY)
Переглядів 66Місяць тому
In this video I document the process of removing a rear disc caliper on a Mazda Protege5, and installing a new one. The existing brake caliper was rusted and sized and the piston would not release the inside brake pad. The outer brake pad was completely worn. I drove it like this for about 30 miles (with loud grinding disc against caliper) until I could park the car and exchange the calipers.. ...
Turkey Noodle Soup
Переглядів 352 місяці тому
Our family loves this soup! Besides the turkey drumsticks & the seasoning, everything else in this recipe is from our garden: *Carrots *Garlic *Potatoes *Onions I use Italian Seasoning, Pepper, & Salt for seasoning, but you can add whatever you like. This video is a "DOUBLE batch" of the recipe, that I cooked in my canning pot. Simply, enjoy! (SINGLE Batch) Turkey Noodle Soup Recipe: * 2-3 turk...
Updated Review of a Morsø 1440 B Wood Stove
Переглядів 1,7 тис.2 місяці тому
We did a review on this stove last year. Since then we have had questions about it, particularly about the bottom vent. This is an updated review of the stove and will show how we dealt with the bottom vent issue. Even after 3 years of using this stove, our previous review is still the same... we LOVE our wood stove! It still is our main source of heating our home. Here is a link to their websi...
Planting Garlic in the Fall : Inchelium Red Variety
Переглядів 2133 місяці тому
We are about to have continuous frost at night & colder days, Fall is coming! We really like the Inchelium Red variety for it's taste & hardiness, so that is the kind we are going to continue to grow.
Apple Strudel Recipe from Croatia : “Štrudla od Jabuka”
Переглядів 1483 місяці тому
This is such a simple and FUN dessert, make it for any occasion! Serve it with vanilla ice cream, dust it with powdered sugar (our favorite way), or just eat it the way it is. It can be made without the raisins as well. The Pastry Dough: 600 g (4 ¾ Cup) Flour ½ tsp. Salt 340 ml (1 ½ Cup) Tepid Water 4 Tbsp. Oil (canola or vegetable) 2 ½ Tbsp. Apple Cider Vinegar The Apple Filling: 1 kg (6 ½ Cup...
Review of a Chop-Rite Two #32 Meat Grinder : Hand-Cranked
Переглядів 7063 місяці тому
This is a review of our hand-cranked meat Grinder from Chop-Rite Two, Inc. #32 We were grinding up deer meat. Pros: * Not too heavy, great to store *Pretty easy to assemble & clean (except for the disc plate) *Its great for small batches * Comes with simple "care instructions" Cons: - It would be tiresome if you had a lot of meat to grind up Things we learned: * Needs 2 clamps to hold the board...
Potato Harvest : Yukon Gold
Переглядів 2224 місяці тому
This has been a rough year for our garden (having unexpected frosts in June, July, & August!)...but we prevailed and had a great harvest! We will save some as seed potatoes (especially the ones that had bite marks from the voles) and enjoy the rest.
Two Weasels Fighting : Wildlife
Переглядів 1094 місяці тому
Hermes the Weasel has either a friend or a foe...time will tell here on our farm! This is a good reminder that, as cool as it is to see wildlife on the farm, wildlife will always be "wild".
Bees Making Honey on Minimal Resources in Mountain Desert
Переглядів 884 місяці тому
We live in a rain shadow. There are minimal resources here. These bees forage strictly on wildflowers and haven't been moved from this bee yard. With a long, cold spring that extended in to half of June, July was exceptionally hot. August was normal and helped the bees bolster their winter supplies. We currently have three colonies: two Italian and one hive with a Carniolan queen. She was intro...
How to Blanch Carrots : Freezing For Storage Technique
Переглядів 1674 місяці тому
How to Blanch Carrots : Freezing For Storage Technique
Turning Fresh Carrots into Carrot Cake
Переглядів 814 місяці тому
Turning Fresh Carrots into Carrot Cake
Quick Review of de Buyer Mineral B Carbon Steel Wok 16"
Переглядів 4245 місяців тому
Quick Review of de Buyer Mineral B Carbon Steel Wok 16"
Installing New Clutch Master & Slave Cylinder on Mazda Protege5
Переглядів 1,2 тис.5 місяців тому
Installing New Clutch Master & Slave Cylinder on Mazda Protege5
Quick Alpine Hike and We Found a Mountain Tarn
Переглядів 986 місяців тому
Quick Alpine Hike and We Found a Mountain Tarn
Harvesting over 100 Heads of Garlic : Montana Zemo & Inchelium Red
Переглядів 2196 місяців тому
Harvesting over 100 Heads of Garlic : Montana Zemo & Inchelium Red
Installing KYB Gas-A-Just KG54336 on 4.7 Toyota Tundra 4WD
Переглядів 8016 місяців тому
Installing KYB Gas-A-Just KG54336 on 4.7 Toyota Tundra 4WD
GoPro Mounted on Traxxas Bandit VXL & Redcat Piranha TR10 R/C Cars
Переглядів 1107 місяців тому
GoPro Mounted on Traxxas Bandit VXL & Redcat Piranha TR10 R/C Cars
No. 1943 "The Spirit" Locomotive, Union Pacific Railroad
Переглядів 207 місяців тому
No. 1943 "The Spirit" Locomotive, Union Pacific Railroad
Amateur Captures Bee Swarm (Entertainment Only)
Переглядів 298 місяців тому
Amateur Captures Bee Swarm (Entertainment Only)
Spring Planting Yukon & Carola Potatoes, From Start to Finish #BCS 716 Gardener Plus
Переглядів 868 місяців тому
Spring Planting Yukon & Carola Potatoes, From Start to Finish #BCS 716 Gardener Plus
Spring Planting in Croatia With Ursus C-335 Tractor
Переглядів 5369 місяців тому
Spring Planting in Croatia With Ursus C-335 Tractor
Mountain Desert Farm Euro Trip : Croatia Rally
Переглядів 1079 місяців тому
Mountain Desert Farm Euro Trip : Croatia Rally
Signs of Life in the Garden 2024: Garlic & Voles
Переглядів 1410 місяців тому
Signs of Life in the Garden 2024: Garlic & Voles
Any vids of this in action?
Check out our video about "building the gopher fence, part 1". You will see it in action there!
As laborious as it looks?
What about the axle rating ? Payload for those trucks in not greater than 2k.
Najbolji traktor,imam takvog 74god,nema novca,za kojeg bi ga prodao,..😊😊,!!
Bravo, to je super!
Good👍
The bottom vent is for decorative only. According to the manual. Should use only the top to adjust air
That's correct. However, in the early days when we had just installed the stove, during low pressure weather days, we had a hard time getting the fire to start. After we cracked that lower vent by installing the washer, it has helped the fire to take off during those weather periods and we've never had another problem since.
@@MountainDesertFarmthat’s really good to know. I’m just getting ready to fire mine up. They also note something odd in their manual about not firing over night? Don’t understand that
@@josephriley3658 That is interesting. We have had no problems stoking it and burning through the night.
In Denmark the bottom vent is functional. I'm not sure when it should be used though.
Can you tell me what type of material your hearth is made of and the thickness please , it looks very nice , thanks
Hi, that is the Morsø Black Steel Plate. That is their hearth plate. Our stove dealer had it and it's worked for us. There are lots of other options out there though. Being painted metal, it does get warm but we've never seen it get hot.
How does the straw keep from blowing away? Where are you situated? We are just getting ready to plant our Garlic here in the SW of France.
Due to higher elevation, we have had hard frosts ( -4 Celsius) at night, since the middle of October. We have freezing conditions here until the end of March, early April. The straw is extra protection for the garlic, against the hard frosts. Some of it does blow away, but we just add more. Once it rains, it stays in place. Thank you for subscribing! What is it like in SW France? I don't think you would need to use straw where you are. Just plant it deep enough in case the ground freezes. Our family in Croatia does not need the straw when they plant their garlic.
Great start to the day
Hi. My son just replaced the xlutch kit on his protege 5. He is at the point where he needs to refill the fluid, and we are unsure of how to do that. Do we follow the same procedures as if we were just changing the fluid?
Yes, same steps. If you end up with air in the line just crack the bleed valve and let the fluid push out the air, then top off.
Can I buy one in the U.S ?
Yes, Morsø has dealers in the U.S.
The version sold in Australia doesn't include the tertiary air system
Does it have an Ash pan? 🥴 .
yes, you can access it after opening the door.
@siamakga 👍
@@DD-uf2uo real awesome stove. I've had it for a couple of months and I'm impressed. It burns every bit of wood, and the amount of ash produced is unbelievably little. I would have opted for a bigger firebox => bigger log sizes if it was feasible.
Yes it does. Under the grate, check out the video to see.👍
@@MountainDesertFarmNot seen in the video but I understand it has one.
We just got this very stove but I don't know if I'm supposed to use fire cement , where the pipe hooks on top can you please help me with this ?Thank you !
Hello, we did not need to use fire cement when hooking up the stove pipe to the stove. In our case, we piped it out the back because it was more convenient for us in our location inside the house. Everything that the stove came with will suffice for installation. You could also talk to whoever you bought the stove from and they can verify as well.
Nice video
How did you open the bottom vent? I've read in other countries it's not welded shut but America being america they weld it shut and somehow it's safer to lite it with the door open 🤷♂
Hello, the bottom vent on our stove has a nut/bolt on the inside of the door. The nut holds the vent shut tight. We undid the nut, added a washer, and then screwed it back on. This allows for a tiny gap of air to feed the fire, in addition to the main vent. We will make a small video showing the process. Very simple. (The instruction manual however says the bottom vent is to be closed at all times, fwiw.)
I have posted a new video about this stove & addressed your question in it. Hope it helps you out!
This may be stupid to ask but if it’s just the master cylinder bad do you need to replace the slave cylinder as well or will the stock one still work fine with the new master cylinder.
Nope, you can do one at a time. In my case, my Master Cylinder was the problem, but I did them both at the same time because I got a discount buying both. (As in, buying online at O'Reilly and shipping to home with free shipping was cheaper than buying at the counter.) That being said, I still have the original slave cylinder saved just in case since it looked fine to me when I took it off.
Add thrust washer in review
Yes there is a thrust washer that comes with this grinder, just forgot to show it in the video.
Price please
U can also store them in boxes of sand just it hase to be moist and no need to wash the carrots keeps them fresh for good measures of time
Thank you for sharing! I have heard of that method and will try it.
He's just looking for your chickens
How utterly cool is that?!!!
❤❤❤
Beautiful animals!
So stinking cute
Peek A Boo
how i wish to know how to prepare potato seed
fun sized carnivore in his little wooden fortress
awesome vid🔥, this is beautiful
Thank you!
Curious how to bleed clutch line as I have replace the soft line, any suggestion?
Hi, I did what's called a gravity bleed, where I opened up the bleed valve on the slave cylinder while I slowly topped off clutch fluid reservoir. There are some generic short videos on UA-cam that show that, so I didn't cover it here. It can be messy... have some rags handy. But if you're just replacing the rubber line between the master cylinder and the reservoir, you may get lucky and have the air just go up into the reservoir once you hook it back up.
@@MountainDesertFarm Thanks for your promptly reply, lucky I have got it fixed yesterday, good to know I am not alone on old cars, mine is Mazda GLX which is 24 years old.
Lucky it didn't attack after putting the camera so close! ; )
This is a young one and it's mostly curious. We have seen 4 more around the house at various times. They don't stick around though 😮
Weasels think woodpiles are perfect homes!
And. Big sus pulls him. Now she wants a turn. Ha ha
Berapa bln usiya panen kentang bos.
Halo, kentang bisa dipanen antara 70-100 hari. Itu tergantung pada iklim Anda. Di tempat saya tinggal (musim tanam kering dan pendek), dibutuhkan waktu mendekati 100 hari. Semoga itu bisa membantu!
Nice sharing
Witch one taste the best?
Depends on what you like. I like the farm eggs best because there is more yolk and the taste is richer. Plus, I like them better for my baking. If you like the white part more, the store bought egg has more white than the farm one.
Cool🔥🔥🔥
🤗🤗
Cool
Wow
❤
WOW
🐝🐝
Wow😮❤
Cool🙃
Wow😉
Cool
😍
Nice😊
❤❤❤❤❤😊😊
Nice😊