Відео

It is one of the rifles that can be disassembled and reassembled very easily 16 joules of power at the muzzle

Can you give me some tips to get good power

How do we reduce the Outer diameter of the spring.. my norica air rifle spring broke and none of the available sprigs can enter the piston. Need to reduce at least 2mm on od. Or can we grind on the od

Ridiculously helpful video. Let's pray this is always on the Internet 👌

I wish this was more complete on reassembly ..,very informative thank you 😎👍🏻

Will a Gamo tbt spring fit a HW 95 they measure up much the same as an OX Spring ?

Really appreciating these videos you make and the tips you share with us. Always nice to learn from a professional! Keep it up my man! God bless!

How powerful is hw99s generally with one of your 31 coil springs and the two preload washers, and would it still shoot smoothly? I live in the Netherlands so if it’s over 12ft/lbs it’s no problem.

Very informative video 👍

I would be too scared to dismantle my HW57 all on my own out of fear of messing it all up.

I put my rifle back together but now it won't cock??

Brilliant, thanks Nick, just received the tuning kit today 👍

Can you tell me if these springs would fit in a walther terrus please cuz I have a walther 22 but it's not powerful enough or do you have new kits for the walther terrus?

Nice strip down would of been nice to see it built up again . Iv got an old hw35 that still does the job had it since I was a kid lol . Only use it for target stuf (to noisey in field lol ) but got some age related marks so am going to do what you have just done Thanks for the info 👍👍👍😜🏴󠁧󠁢󠁳󠁣󠁴󠁿🦄🦕😁✌️🤞

Where can I get my air gun spring around South Africa johannesburg

I fitted TBT guides to my TX200 today! No twang and smoother to cock! 😎

Hi.can you help? im ordered new spring for HW 95 and is bend from new- not straight .is this normal????from center to both ends 1,5cm like moon

How much is the tbt maxi set mate?

I am assuming you are in the UK? Do you handle full power kits for the US market? I just bought a HW50S new last month to go with my FWB 124 Sport that I bought new from Beeman's in the very early eighties. I heard remarks that the new FWB's and HW's were sent dry from the factory with no grease at all? My piston seal finally wore out on the FWB and I am pleased to say that they had done a thorough job at the factory in greasing it then. This was the first time I had taken it fully apart and the spring was thoroughly greased with a heavy lube that still felt and looked fresh, not so the seal as its edges had eroded and flaked off. Just found your channel and subscribed finding it very interesting.

Very helpful video and thanks for posting this. I have a Beeman R9, full power. Will I need a compressor to take out the trigger block?

Why do they call you tin bum?

What if you want more power

Thanks for sharing your knowledge and skill. I have the standard Hw50 And it came with a cheaper standard non adjustable trigger unit which is not very smooth. Just wondered if you knew where I could aquire a record trigger unit. Thanks again.

Like the way you say at the end that you might need to shorten the spring if it goes over the legal limit, some people don't have the tools or would know how much to cut off.Kits are way,way over priced as well, could have also done with some close ups of what you are doing.

if my AA is firing at 11.4 , how does this help .. its BS

Best best best gift for everyone to watch on UA-cam Dr Zakir naik English and get real heaven's satisfaction and happiness and save urself and ur families

I have the Hassan 95 with the gas piston never had any problems till last week when I went to cock it it seem like it was already cocked the trigger will pull but nothing happens. Please help

Just wondered if tou were able to recieve a rifle and install one of these kits seriously intrested just not competent to attemp it myself

Brilliant company and outstanding customer service 👍

I ordered a tbt kit Thursday night I got it this morning it in the rifle now and am amazed no twang just a nice thud spot on I recommend this it to anyone it dropped in nicely 👍👍

I’m asking out curiosity ( and perhaps ignorance ) about the use of lithium grease rather than molybdenum grease. In this application is one better than the other ?

excuse me for my ignorance tbt.Are hw 99/98and 95 all the same dimension cylinders and pistons and swept volume ? what diameter is the piston head pls If its 26mm is it the same piston as the hw77/97.thx

Hi iv tried to remove the weights out of my piston on my 99s and only the first one came out all the rest are jammed in there iv tried everything from banging ect they just won’t come out how can I resolve this problem

Why have you removed the factory fitted weights? Will doing this increase or decrease power?

E

It sure looks to me like you got the bum slide moly on the head of the piston seal... ?

Excellent video! Nice and concise and you're right: that is enough lube!

ua-cam.com/channels/EhA2EYhzXF_gmoThBfMgTw.html

Is it normal that my gun doesn't have a cocking shoe?

Where do you purchase the upgrade from?

Good video.

Very good video and informative, have been thinking of getting an HW45 for a while now. Have TBT kits in my HW77, Diana 38 and BSA Airsporter S, what a difference in accuracy, consistency, recoil & noise, all improved. Were fitted by Paul Chell while in for re-blacking. Thanks Nick, greetings & best wishes from Darlington.

why arent these pieces factory-fitted, if they are better?

Will i get around 18ft lb with this kit on my hw77

Very informative thanks for sharing. Owned one these about 30 years still shots well but by now it could do with a service I think 👍👍👍

I used to bodyguard in the nineties and having a military calibre pistol in France was illegal - so no 9mm. This has obviously changed, or did I carry a crappy .38 for no reason? 😂

great video, my dad lost his in 1944

how to chnage barrel and do i need chnage spring if i do convert to .177?