- 40
- 64 374
EDIFY
United States
Приєднався 8 сер 2023
Widebody Eclipse gets Fast and Furious Decals!
In today’s video we installed Fast and Furious inspired decals onto the Widebody Eclipse! This was very challenging hence the lack of experience and because the decals weren’t made to fit a Widebody 2G DSM. We learned a lot that’s for sure! Let me know if you have any questions and what you think about how it turned out down in the comments! Thanks for all your support.
#cars #fastandfurious #dsmsociety
#cars #fastandfurious #dsmsociety
Переглядів: 1 382
Відео
Wrapping the Widebody Eclipse Hood!
Переглядів 6364 місяці тому
We used $45 Vvivid Carbon hood wrap to wrap my Mitsubishi Eclipse GSX’s hood. Jav came over with a little more experience than me and we learned a lot together. These next couple videos are straight fire 🔥 Stay tuned and don’t forget to subscribe! #cars #wrap #carbon
New Wheels for the Widebody Eclipse!
Переглядів 8064 місяці тому
We got new wheels for the WideBody Mitsubishi Eclipse GSX! In this video we are showing you what wheels we are getting rid of as well as the specs and what wheels we got! Leave your comments down below and don’t forget to support our content it helps us out so much! #workwheels #cars #widebody
Spray Painting My Widebody Eclipse GSX
Переглядів 2,1 тис.4 місяці тому
In today’s video we are painting the WideBody Eclipse GSX! We used Montana Black Infra Green which will glow under a black light, 2K Clearcoat from SprayMax and Rustoleum Rusty Metal Turbo Cans! If you have any questions leave a comment down below! Any guesses on what wheels we got? 🤔 Don't forget to subscribe! #cars #widebody #eclipse
Nismo 350Z Build Walk Around!
Переглядів 1,9 тис.5 місяців тому
We walked around our 2003 Nissan 350Z Fismo. We did a full build tutorial and guide with how we turn this regular DE 350z into a Nismo look a like! Stayed tuned for more videos and like always don’t forget to subscribe! #350z #nismo #cars
How To Restore a Faded Carbon Fiber Hood!
Переглядів 2,6 тис.5 місяців тому
In this video we are Restoring a Carbon Fiber hood on the 240SX S14! We sanded down the hood and resprayed with 2K Clear Coat. If you have any questions, comments or regards leave them down in the comments below and we’ll try our best to answer! Subscribe for more content we’re in this for the long run! #howto #carbonfiber #cars
How To Fix 3 Piece Wheels!
Переглядів 6096 місяців тому
In this video we are resealing three piece wheels without taking them apart! If you have any questions leave them down in the comments we’d be happy to answer any of them! Thanks for all your support! #3piecewheels #jdm #cars
The Rarest OEM 350z Mod (1 of 300)
Переглядів 6126 місяців тому
In this video we unbox one of the rarest 350Z mods you can still do to your car! A Nissan 380RS Nismo Steering Wheel! We also go over how to install a steering wheel into the 350Zs! Don’t forget to subscribe we’re on this for the long haul! #z33 #cars #350z
Installing the Widebody Kit On the Eclipse GSX!
Переглядів 3,9 тис.6 місяців тому
In today’s video we are installing the rocket bunny v3 wide body kit on our 1996 Mitsubishi Eclipse GSX! It is only the beginning with this car and we have so much more in store! Leave a comment below what color you think we are going to paint it and what car you’d like to see more on the channel! Don't forget to subscribe! #cars #widebody #eclipse
How To Install a Nismo 350Z 3rd Brake Light
Переглядів 1,4 тис.6 місяців тому
In this video we will be installing our 350z Nismo V3 Spoiler and wiring up the 3rd brake light. Enjoy the video! Part 1: ua-cam.com/video/Dx3-MATggws/v-deo.html 3rd Brake Light: www.spoilerlights.com/spoilerlights/nissan-350z-nismo-spoilerlight-type-sl-2040rd/ #350z #nismo #nissan #autech #370z #gtr #380rs #carshow #cars #car #wings #spoiler #install #tutorial #duckbill #winginstall
Widebody Eclipse Gets A New Bumper!
Переглядів 7556 місяців тому
In today’s video we are installing a fast and furious Blitz style replica front bumper cover, we had one before (not the yellow one) and it was fiberglass and did not fit well. This bumper is from KBD and fits great! #cars #widebody #mitsubishieclipse Music: S.I.R.E.N.S (prod. by A.K) WhatAShame (prod. by Vegard)
Top 5 Things I Love About My 240SX S14
Переглядів 2077 місяців тому
Today we are going over the TOP 5 Things I LOVE about my RB25DET Nissan 240SX S14. If you have any video recommendations leave them down in the comments! Thank you for your support and don’t forget to like and subscribe! #cars #s14 #240sx #nissan
Cutting the WideBody Eclipse Side Skirts and Back Bumper
Переглядів 2,8 тис.7 місяців тому
In today's video we are cutting the underneath of the Eclipse's back bumper, adjusting the back bumper gap to make it look more finished and cutting the Rocket Bunny BRZ V3 SideSkirts to be one step closer to mounting the kit. After Mounting we will be painting! Let me know what color you think down in the comments below! Thanks for watching let me know if you have any questions. - EDIFY GARAGE
The 1969 Dart Gets New Wheels and Air Shocks!
Переглядів 4007 місяців тому
In today’s video we are installing Gabriel Hijackers Air Shocks onto the 1969 Dodge Dart! Leave a comment if you are enjoying the muscle car content! #mopar #dodgedart #cars
How To Install a 350Z Nismo Back Bumper
Переглядів 4,3 тис.8 місяців тому
In this video we are installing a 350Z Nismo rear bumper cover from Shine Auto Project. If you have any questions let us know in the comments, don’t forget to subscribe for more content! #cars #350z #nismo
How To Install OEM 350z Nismo V3 Side Skirts
Переглядів 2,9 тис.8 місяців тому
How To Install OEM 350z Nismo V3 Side Skirts
Installing a GlassTek Hood Scoop on the 1969 Dodge Dart!
Переглядів 3999 місяців тому
Installing a GlassTek Hood Scoop on the 1969 Dodge Dart!
Best Daily Driver Wheel Specs On Stock Suspension - 350z
Переглядів 2529 місяців тому
Best Daily Driver Wheel Specs On Stock Suspension - 350z
Insane Garage Tour - Full 2023 Collection (13 Cars)
Переглядів 1 тис.9 місяців тому
Insane Garage Tour - Full 2023 Collection (13 Cars)
Top 5 Things I Love About My Eclipse GSX
Переглядів 2,6 тис.10 місяців тому
Top 5 Things I Love About My Eclipse GSX
How To Restore Yellowed 350z Turn Signals
Переглядів 33710 місяців тому
How To Restore Yellowed 350z Turn Signals
How To Remove REAR BUMPER On 350Z
Переглядів 3,4 тис.10 місяців тому
How To Remove REAR BUMPER On 350Z
Unboxing *RARE* Nismo 380RS Wheels From Japan
Переглядів 30111 місяців тому
Unboxing *RARE* Nismo 380RS Wheels From Japan
Installing NEW Factory Rebuilt Carburetor In Our 1969 Dodge Dart
Переглядів 17511 місяців тому
Installing NEW Factory Rebuilt Carburetor In Our 1969 Dodge Dart
Great video man, will be following this when I finally purchase the products required xD The headlights are pretty cooked on my Z right now. And unrelated but I had a kangaroo interrupt my togue run last night. Was flying with my shitty headlights and all of a sudden a roo appears standing still in the middle of my lane, and it's a tight road with 2 lanes. Swerved around him as I had no time to break completely, and just remember thinking how stoic he was. He didn't even look at me, just a big f off roo standing his ground in my lane 😂 Almost could have died and it woke me up
What’s the paint the OEM nismo uses for ye side skirt? Nice video btw man thanks a lot! I’m happy with it :)
KH2 👍
Name body kit
This is 420a attitude not 4g. I'm disappointed
Fismo
That bumper and wing both looked great
i can tell the song is from Forza Motorsport 4 LMAO
It is bro! You’re a goat
Okay a couple questions 1.) when you sanded in the beginning were you wet sanding (like just dipping the 800/400 in water) ? 2.) what is things I can do to ruin it that I do not want to do 😬 3.) you said let the clear coat flash for 10 mins depending if the suns out if the suns out do I let it flash less time since the suns out ? 4.) after the buff do I wash it off or just wipe it off before I polish ? 5.) after the polish do I wash it all off or leave it or wipe off? Sorry so many questions 😬
Another question when you use the 105 u used the buffer do you use the polisher with the buffer as well or a rag ?
1. I was constantly having the surface wet and you'll know when to add water since the sand paper will clog up and the water will clear the sanding pad. You can dip the paper in a bucket of water and or just keep the surface wet with a hose or something. I was also outside (not ideal) so the water evaporated quickly. 2. You just don't want to sand into the carbon fiber weave or into the epoxy, ideally take off just the top clear coat layer (you'll get a feel for it and understanding when you start sanding just be cautious. 3. Ideally never do paint work in direct sunlight but this is real life so if the suns out let it flash or have a drying period of about 7-10 minutes, if you have masking tape or protection on the side of your project touch that and feel if its tacky to know if its dried enough never touch the clear coat on your hood. You want it to dry but not completely just a good amount so it isn't totally wet but it still can grab the next coat when you spray it. 4. I'm not a buff/polish expert as I've done it only a handful of times but I wiped it off I didn't use water and clean it. 5. Same thing I didn't use water and clean it, I wiped it. But I would look that up because maybe you should be washing it off. I don't mind the questions thank you for all of them!
I used both of them with the buffer, not sure if that is the correct way to do it but mine came with different pads and a guide on which one does which. I would use the cutting compound with a microfiber pad and then polish with a foam pad. You can use both on the buffer machine if not you can do microfiber by hand. If you have more questions no problem, hope I answered them well, I would reference a couple of UA-cam videos and compile all the info you get to have the best peace of mind! Hope it turns out great!
I only have a few patches that need fixing, would it be smarter to do the whole hood or just the spots
That was what I had thought too at one point, I’d say the integrity of the clear coat is probably on its way out if you have spots that have faded and would be best to do the whole hood but you could definitely sand a spot and try it before you commit all the way. I even thought maybe sanding those spots and using a clear coat wipe. But probably best to do it the correct way 👍
@@edifygarage thank you. Glad I came across your video
@@edifygaragehow my cans did u end up using?
@@rocket4215 I can’t remember exactly I think it was 2, I would advise to do nice thick coats and from what I remember some people used 3 or 4 cans and that would provide more room to buff and cut the clear coat and more protection in general but I didn’t feel the need for my project
Heck yeah man this turned out super good. Good job. Im about to fix some carbon fiber on my Evo X so this is helpful.
Awesome thank you for your nice comment! I learned a lot since that was my first time ever doing any of that, if I did it again I think it would look nearly professional! Your Evo will totally shine ✨
Nice z bro
Should've bought a 420a instead of a GSX of you were going to rice it
What year is your eclipse? I dont like your rims. I rock BC coils.
1996 🤩
Excellent video, fast, clear, to the point, no extra BS or confusion. I'm sold, subscribing. Wish more UA-camr tutorials were like this. Well done! And thanks for the video, no need to watch any others to remove rear oem 350z bumper.
Means a lot, we were going for that style and really appreciate you seeing that in our videos! You’re a real one 🤝
I love it
Keep it up bro! Fire.
Bro yall have gotten far asf since I’ve last seen a video which was months ago like crazy long ago
How long did it take for it to arrive from shine auto?
It was a couple of months I believe, they have to make it I don’t think they have them pre made
where did ya purchase those spacers fam?
eBay, make sure they’re hub centric and made of a good quality metal. Look at reviews
is where you bought the eclipse 2g bodykit
eBay, frs rocket bunny v3 kit
why waste all this money on a de?????????
Never been done, more reliable and was my bros first car why wouldn’t we is the question
Muscle cars are better 💪
Still following looks great 😎
Ya did great so far 😎
just restored my mirror caps following these steps, great video bro
Awesome glad to hear that! Thanks for supporting the channel!
For the BRZ does the skirt and flare normally sync up, cuz that gap is fat
It normally does sync up, take a look at my decal installation video or even the painting one. I went ahead and closed the gap after looking at it and thinking about it
@@edifygarage I will :)
Hey great job , and the wing looks good , and this is coming from someone who doesnt really favor anything but the gst wing on the 2g , but i say refine the base make it as thick as the wing itself keep the same hieght , and yeah 😎 like where its going , good luck and drive safe 👍🏾✌🏾
Yep totally agree thank you for your comment!
Clutch dude, I've been coming back to this video for my supplies and going to do it soon.
Awesome! Make sure you do a nice layer of clear coat so you have less to buff/cut and so it’s well protected!
Just found your channel, love seeing all the projects. Definitely here for the long run! My brother also had an Eclipse. 1993 first gen with the pop ups. Loved that thing.
Those are really cool cars! Thanks for all your support I’m glad you’re here!
Looks great man
Thanks!
needs nismo suspension
KH2 is the same color as my 90 GTR! very cool
rip its an automatic
Viva México 🎉 .
Thank you for this turtorial video... I will try to my DIY hood wrapping on my eclipse...
Awesome! Hope it turns out great, for our vinyl us using too much or even a little heat didn’t help. That’s how we got that messed up area
Damn werde look good rollin side by side... 😮
Lookin good 👍
Thanks 👍
Cool video looks better than the og
Means a lot thank you
watching from Namibia, Africa. I love this channel so much. 🔥🔥❤❤💖💖🤞🤞👌👌
👍👍👍 thanks for your support
Its pretty cool not gonna lie. Brings back the fast and furious vibe lol😂. But somewhat the green is looking more like a mint green rather than the yellowish bright shocking type green.
Unfortunately nobody knows which direction to go with the paint color, in the first fast and furious they used a warming filter over the lenses so the green you see in the movie is totally different from what it would be in real life, we tried that, putting a warming filter over my car and it looks the same. Also the red s14 that letty drives in the first movie is also purple but because of this filter it shows up red.
@@edifygarage ooh thanks for the extra info
🔥
Thanks for all your support 😎
Body kit looks great, where was the Nissan dealer you got the front bumper I would kill to have it
When we first were doing research on where to buy the front bumper I saw Larry H Miller have it for sale. Maybe that was the last one and someone bought it, our receipt shows we actually bought it from Z1Motorsports. I misspoke in the video my bad
The Nismo lower valence is actually nut and bolted to the OEM side skirt from factory. But the clips you used will work just as good. Sick Z!
Part No.: F2297-1A44A (9) total and 08911-1062G are the nuts.
Amazing job bro !!!!
D🙂pe👍🏾
This is awesome and it’s really weird I always said I was gonna do a brz wide body and a 326 wing on my gsx😭 love it bro I’m still gonna do it
That’s so sick! I have a video where I used a rep 326 wing just to see how it looked. Good luck with yours brother can’t wait to see the outcome 🤝
Windex..... soak hood in windex and push out liquid with squigy then let Dry... looks good though 👌
Yeah that’s a good idea, I’ve heard about that just didn’t think of trying that
Love the way the car is turning out but definitely wish you would’ve just went with a real carbon hood
Once we start making money off UA-cam! Real carbon hood and real paint would be amazing!🥲
Tinybot has the best looking carbon fiber vinyl wrap. Nice Z. I also have a DE fismo. Full Oem body kit and im picking up the oem side skirts tomorrow for $75!!! what a steal. I’ll be resorting to your video for installing them. Subbed.🦾
That’s awesome thank you for your support! Your car should be looking great with those skirts ours unfortunately weren’t $75 😭 and I agree tinybot and auravinyl I think have the best wraps but we’re balling on a budget over here for sure 😂
You did such a good job, love the car!
Thank you so much!
Looks good!
Thank you!