Just put the truck on auto start and the sleeper climate control on and I promise you that truck will start and stop all night. This can ruin something with the truck. I forgot what it was.
@@PhillipTalmadge it’s doing a exhaust burn off. It will happen every time you idle for a long period of time and then after it’s done, it will go back down to normal.
Change your gearing your sprockets run premium added gas VP . put a NGK spark plug in ,and if you find yourself needing more power upgrade to the 300 injector from GPX.
@@davidduval5566 i’ve been completely honest if you’re looking for a bike that isn’t all beat up and is practically new that’s the better choice. or you can buy an older bike completely rebuild it and just understanding you bought to keep forever, or until you have enough money to buy another brand new bike. but most of the time to get a YZ 85 125 or 250 that runs you’re paying four grand for a bike that’s already been used for 100+ hours.
@@ronniecalhoun3448 thanks man I really appreciate it I turned 36 in December and have not had a bike since I was 18 I can't wait do you think it should be a good semi beginner bike for just cruising two tracks and trails
2023 international LT -Turn on truck all the way. -Press in parking brake. -Press cruise on button, release -then hold "set" button - pull parking brake - release "set" button when "engine throttle" on dash appears
I HAVE A QUESTION PLZZZ DO YOUR BIKE HAVE A SPACE ON THE TRIPLE CLAMPS,,,,LIKE NOT ALL THE WAY CLOSED🤔 It's saids 3.8 on the bolt but the clamp as space 🤨
Ok, for you guys in a 2022 International LT625, Cummins X15, Automatic, this is the procedure for “Parked Regen” Step 1: Press the break pedal, Push in Tractor Parking Break. Step 2: Place Automatic Transmission in Drive Step 3: Place Automatic Transmission in Neutral, Pull Tractor Parking Break Step 4: Release Break Pedal, Press “Parked Regen” Momentary Switch, if done correctly Green LED Will be On and truck will Immediately idle up. During the Process, you will see the “High Exhaust Temperature” Light come on on the instrument cluster this is normal, and shows that it is working. Yes, it is finally working! After 1hr 24minutes process complete on this truck! Sometimes if you want it done right you gotta do it yourself, so I did!
I’m in a 2022 International LT625 Automatic X15 Cummins, Penske that we started renting 12/2021 with 200 miles on it and as today 19 February 2023 currently only 49,951 miles, but 2727 Engine Hours. I have never had to do any of that stuff. Just press the Cruise Control On Button, then press the Resume button and “Engine Throttle” will appear on the instrument cluster, and idle will self set at 800rpms. If I want a higher idle, I just need to press and hold Resume to reach desired rpm. When I first started driving this I did find out that with out setting Cruise Control, it would shut down, but I always set Cruise, so I guess I didn’t even think about it much, because the fix was easy, ya know?
Try this. In park, with parking break set, in neutral. Turn off Cruise Control, then turn it back on. And press Resume. Should then throttle up to about 800rpms. And if you hold Resume should ldle up. Give that a go…
700 rpm is way to slow not enough oil PSI If the no idle is not working You have bad batteries or a bad connection My 22 with currently 167000 miles is in its 3 set of rear batteries
So, can you set your tractor brake when done, or do you have to leave it off? If you're in a cold climate, leaving your trailer brake set will cause them to freeze and stick. Causing a bigger issue in the morning.
Just put the truck on auto start and the sleeper climate control on and I promise you that truck will start and stop all night. This can ruin something with the truck. I forgot what it was.
No it won’t lol.
I was sweating it out!! Thanks man.
Any time! Good day sir
@@ronniecalhoun3448 any idea how to put it back so idle isn't so high?
@@PhillipTalmadge it’s doing a exhaust burn off. It will happen every time you idle for a long period of time and then after it’s done, it will go back down to normal.
Change your gearing your sprockets run premium added gas VP . put a NGK spark plug in ,and if you find yourself needing more power upgrade to the 300 injector from GPX.
I recently bought a k6 efi. How can I maximize the power and performance?
My engine is stuck at a high throttle now. How do i turn it back down
It’s probably trying to regenerate after it sits at idle
I'm in 2022 and it didn't work. I need it because I'm on CPAP.
I was in the shop before video lol
Love the lil saw vids...I get the gloves but I don't get why you'd choose latex gloves haha
What bike do you order plastics for that will fit it? And do all of them fit or only the fronts?
Efi back is KAYO only without mods but can make ktm work . the front is 16-19 ktm 250sx
Should i get this 21 k6 efi 250 only $1900 has 8 hours looks brand new. Thinking its a steal for me
As long as it checks out good bike
@@ronniecalhoun3448 I'm gona check it out I almost got old 2 stroke
@@ronniecalhoun3448 is anything I should be looking at. I'm wondering why he would sell it so cheap
@@davidduval5566 i’ve been completely honest if you’re looking for a bike that isn’t all beat up and is practically new that’s the better choice. or you can buy an older bike completely rebuild it and just understanding you bought to keep forever, or until you have enough money to buy another brand new bike. but most of the time to get a YZ 85 125 or 250 that runs you’re paying four grand for a bike that’s already been used for 100+ hours.
Exactly true was nice yz250 but it's used
Wow
Nice review man.. the seat looks pretty uncomfortable. How is it.. ans does seat concepts make a aftermarket one for it??
No it’s perfect
Did you change sprockets? I've got a 21 year model and for woods riding it seems to be geared on the high side. What's your thoughts?
13 - 51 JT self cleaning. is the sweet spot for woods . replacing the chain with name brand ORING
Parts wise. That 13 tooth sprocket would that be a ktm part number?
@@shawnbennett9971 JT Sprockets JTR210.51SC 51 Tooth... www.amazon.com/dp/B07VLJR1RK?ref=ppx_pop_mob_ap_share
JT Sprockets JTF432.12 12T Steel... www.amazon.com/dp/B001AVS57I?ref=ppx_pop_mob_ap_share
And any thoughts on tuning the efi?
Do you know which skid plates fit on the EFI I heard something about 2017 KTM skid plates?
www.ebay.com/itm/283412010931?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JdlOYaVOS6a&sssrc=4429486&ssuid=2w9ezuwjrbw&var=&widget_ver=artemis&media=COPY
All of them require a little modifications, but this is the one I fit
@@ronniecalhoun3448 thanks man I really appreciate it I turned 36 in December and have not had a bike since I was 18 I can't wait do you think it should be a good semi beginner bike for just cruising two tracks and trails
@@James-yc5qe I’m 36 to and I’ve been being super careful. But have fun 🤘
2017 will work
2023 international LT -Turn on truck all the way. -Press in parking brake. -Press cruise on button, release -then hold "set" button - pull parking brake - release "set" button when "engine throttle" on dash appears
I can't get mine to kickstart for shite lol it runs great and electric starts with no problem. Ever had this issue with yours?
ahhh you answered it lol ty
When I look for the plastics what model ktm do I put
2016 to 2019 sxf
Привет из России!
+ рашка рулит :)
Learn how to read a tachometer,no Diesel engine runs six THOUSAND rpm,try multiply by ONE HUNDRED!!!
Thanks. This worked for me. I have a 19 international LT
🙌🙌👌✌✌💣💥
Where do you get parts and what bike do you tell them to reference a Ktm 250 ?
2015 to 2019 ktm sfx
I HAVE A QUESTION PLZZZ DO YOUR BIKE HAVE A SPACE ON THE TRIPLE CLAMPS,,,,LIKE NOT ALL THE WAY CLOSED🤔 It's saids 3.8 on the bolt but the clamp as space 🤨
Yes a little gap is ok
There should be a little space
THANKS FOR THE IMFO BRO
Out of fuel with half a tank ain’t no way
Dude my cruise control won’t come on while sitting still
You have to push the yellow air brake in and hit on them pull it back out and hit set
Worked for me in a 2022. funny enough, a friend had a 2024/3 i can’t remember but this didn’t work for him
I have the new 23 now and still works
Wont work on my 2024
Preciate ya bruh it worked on my 2023
No problem
You do t need to do any of that… just park and set your cruise and you’ll see the engine throttle display.. and that’s it.. truck will not turn off..
Not on every truck sir some fleet trucks have lock out idle.
Didn't work for 2024 model
How do u reset the idle the next day my truck idle to high
My is doing the same now. I don't know how to fix it
Ok, for you guys in a 2022 International LT625, Cummins X15, Automatic, this is the procedure for “Parked Regen” Step 1: Press the break pedal, Push in Tractor Parking Break. Step 2: Place Automatic Transmission in Drive Step 3: Place Automatic Transmission in Neutral, Pull Tractor Parking Break Step 4: Release Break Pedal, Press “Parked Regen” Momentary Switch, if done correctly Green LED Will be On and truck will Immediately idle up. During the Process, you will see the “High Exhaust Temperature” Light come on on the instrument cluster this is normal, and shows that it is working. Yes, it is finally working! After 1hr 24minutes process complete on this truck! Sometimes if you want it done right you gotta do it yourself, so I did!
I’m in a 2022 International LT625 Automatic X15 Cummins, Penske that we started renting 12/2021 with 200 miles on it and as today 19 February 2023 currently only 49,951 miles, but 2727 Engine Hours. I have never had to do any of that stuff. Just press the Cruise Control On Button, then press the Resume button and “Engine Throttle” will appear on the instrument cluster, and idle will self set at 800rpms. If I want a higher idle, I just need to press and hold Resume to reach desired rpm. When I first started driving this I did find out that with out setting Cruise Control, it would shut down, but I always set Cruise, so I guess I didn’t even think about it much, because the fix was easy, ya know?
Some trucks have a park lock out idle unfortunately fleet trucks by some companies have been setup like this
It doesn’t work on my 2023 model 😢
Try this. In park, with parking break set, in neutral. Turn off Cruise Control, then turn it back on. And press Resume. Should then throttle up to about 800rpms. And if you hold Resume should ldle up. Give that a go…
700 rpm is way to slow not enough oil PSI If the no idle is not working You have bad batteries or a bad connection My 22 with currently 167000 miles is in its 3 set of rear batteries
Get dummy you don't need much oil pressure at Idle speed and Cummins are designed to run low anyways,read the Cummins owners manual first
So, can you set your tractor brake when done, or do you have to leave it off? If you're in a cold climate, leaving your trailer brake set will cause them to freeze and stick. Causing a bigger issue in the morning.
Yes reset the brakes
@@ronniecalhoun3448bro my cruise control won’t work sitting still?
@@kggarrett1667 u have to do exactly what I did step by step
@@ronniecalhoun3448 lmao all I I gotta do is leave your auto lights in and the truck will stay on
@@ronniecalhoun3448 I figured out leaving my lights on keep the truck running because it’s gotta battery saver lmao
💪🏽