- 207
- 113 411
Retirement Revolution Adventure
Canada
Приєднався 1 бер 2015
Retirement Revolution Adventure channel is meant to be for young and older people.
Hi, my name is Petar Susnjar and I am living in Canada and Croatia since I have retire. I want to document most of my fun in retirement that people could do the same.
For older: What I and you will do when we go to retirement?
You can be busy with your hobbies and travel only so much. You can play with your kids, grandkids only so much. You can fool around (drink, smoke, talk to boys and girls) only so much. , ...
What else, what else you going to do, ...???
This channel is all about that - What Else You Going To Do!!!
Second for young: In each video here is intention to teach you something. Each video should show some new first time seen segments in the media. Many times doing those videos I had in mind how to entertained viewers that is not boring watching. In this process you will find many skewed data that is not entirely truth, but is meant to be fun.
Enjoy it watching and learning!!!
Hi, my name is Petar Susnjar and I am living in Canada and Croatia since I have retire. I want to document most of my fun in retirement that people could do the same.
For older: What I and you will do when we go to retirement?
You can be busy with your hobbies and travel only so much. You can play with your kids, grandkids only so much. You can fool around (drink, smoke, talk to boys and girls) only so much. , ...
What else, what else you going to do, ...???
This channel is all about that - What Else You Going To Do!!!
Second for young: In each video here is intention to teach you something. Each video should show some new first time seen segments in the media. Many times doing those videos I had in mind how to entertained viewers that is not boring watching. In this process you will find many skewed data that is not entirely truth, but is meant to be fun.
Enjoy it watching and learning!!!
Radio ML350 (2009) - Not working (Please wait - message)
Suddenly my radio in ML350 stop working and message was please wait.
I was waiting but nothing. I went to dealership and they tried everything but could not figure it out by instruments. They said I need appointment and technician should work on it. Then I turn to youtube for help. Guy did have a little different set up on his mercedes but idea was right. I did how is described in video and radio start working just fine.
Enjoy it and learn something,
I was waiting but nothing. I went to dealership and they tried everything but could not figure it out by instruments. They said I need appointment and technician should work on it. Then I turn to youtube for help. Guy did have a little different set up on his mercedes but idea was right. I did how is described in video and radio start working just fine.
Enjoy it and learn something,
Переглядів: 13
Відео
Beyond the Bolts: A Guide to Maintaining the Case 580G Back Boom
Переглядів 3662 місяці тому
Bolts that keep boom connected to the Case 580G body are going once in a while broken. Last sommer when I was working I got video when one broke. You can see it and hear it here.
Case 580G - Mastering Machinery Maintenance - Troubleshooting the Backhoe Broken Dipper Stick/Arm P2
Переглядів 992 місяці тому
After tirelessly working on my dipper stick/arm I am back to the field work. My Case is again in full swing flattening my hills like a charm. Enjoy watching it,
Case 580G Backhoe Repair - Fixing Broken Dipper Stick/Arm - Part 1
Переглядів 3012 місяці тому
In the winter time when I was not so busy my dipper stick/arm was fixed with professional company. After few months of work I had to do it again. This time I have done it by myself. My opinion is that this kind of work should be done this way and will not be broken for a while if ever!
Flight of the Eagle: Carving a Majestic Bird with a Chainsaw and Oak Wood
Переглядів 3633 місяці тому
Art is a gift of God. Painting is not easy and you should have gift for that. Sculpting is a 3D art which you should have even more advanced gift to do that. Here is one example that one really good sculptor doing fine art from oak wood. Final art of this eagle will be presented in the future.
Case 580G - Perfecting Scraping and Planning with Backhoe
Переглядів 2833 місяці тому
Making a smooth surface for future work with other machinery was task of my Case 580G for now. Here was around 0.7 ha of new land made. Enjoy watching it!
Case 580G - How a Backhoe Saved the Forest Trail
Переглядів 4993 місяці тому
My forest trail was in dangerous condition at the time, and I have decided to take an action. Take a look!!
Case 580G - Transfering Terrain with Ease
Переглядів 3443 місяці тому
Continuing my fun work with my 1985 Case 580G. It is fun when we do not have any defects and everything is working fine. New land is appearing right in front of your eyes. Just take a look!
Case 580G - The Backhoe Impact on Land Development
Переглядів 863 місяці тому
Me and my backhoe continuing to develop new lands for new orchards. Please cheer for us to succeed. Thanks!
Case 580G - Overcome more challenges making it nice
Переглядів 6393 місяці тому
Dig it up from the high and putting it to the low is whole philosophy how to make it flat. That is exactly what we are doing here. Please take a look!
Case 580G - Power to make New Land
Переглядів 5313 місяці тому
In process of converting unusable to usable land I have had lot of fun and good experience doing that. Please join us in this journey.
Case 580G - Building a New World
Переглядів 4243 місяці тому
As you can see I was attacking all of the irregularities on lands that I have to make them accessible and usable for cultivation. In this movie you can see haw two of the worked lands got connected in on piece. Enjoy it watching!
Case 580G - From Dirt to Dreamland
Переглядів 5623 місяці тому
In my eforth to prepare more land for planting and connecting existing orchards my Case 580G is helping me to achieve that. Enjoy watching how we are doing that.
Case 580G working hard to make more usable land
Переглядів 4844 місяці тому
Continuing to work on unusable land to convert it to usable take a big effort but on the end is very satisfying. We got more space to plant different plants that will produce not only fruit but more oxygen for you and me to breath. Enjoy it!
Case 580G - The Backhoe's Blueprint
Переглядів 324 місяці тому
Here is the one short overview of what I have done and what I have to do in the future with my Case 580G backhoe. If you have any suggestion please let me know.
Case 580G - Breaking Ground - Starting a New Pool
Переглядів 6064 місяці тому
Case 580G - Breaking Ground - Starting a New Pool
Case 580G - The Ultimate Guide - Uphill Battle
Переглядів 3454 місяці тому
Case 580G - The Ultimate Guide - Uphill Battle
How thrown away piece of wood become awesome piece of art
Переглядів 184 місяці тому
How thrown away piece of wood become awesome piece of art
Checking Powershift and Hydraulic oil
Переглядів 5094 місяці тому
Checking Powershift and Hydraulic oil
Case 580G building Earth fill Dam on my small lake
Переглядів 1 тис.4 місяці тому
Case 580G building Earth fill Dam on my small lake
How and when to Spray Plum trees for insects
Переглядів 134 місяці тому
How and when to Spray Plum trees for insects
How to measure PH levels of your soil in the orchards
Переглядів 524 місяці тому
How to measure PH levels of your soil in the orchards
Deer Protection Devices for my Orchards
Переглядів 614 місяці тому
Deer Protection Devices for my Orchards
[looks, great]👍
Coll vid❤
It’s amazing ❤
How much per liter oil was add
Music to high, cant hear what you say.......
Hello, could you please give me the measurements of the dipstick for the power shift gearbox mine is broken and missing
In a couple weeks or so, I will give you measurements. Right now I am on far away from my Case 580G.
Hi, ok,many thanks I would very much appreciate it
Dipstick measurements on powershift ATF oil are: from top to full is 60,2 cm, from top to bottom (low)measurement is 63.5 cm. From low to full is 3.3 cm. From low to full is 1 pint of ATF oil. Hope this will help!
Thank you very much
Hi, I have a casei 580 G and it doesn't go forward, reverse works fine, any idea what the problem could be?
There is a few things you can do before you call mechanic to take apart your powershift box. 1. Check level of your ATF oil when your 580G is leveled and cold. 2. Check if is any leak. 3. If your power is lost when is hot, your cooler (radiator) is too small - you can go forward when is cold or you can put bigger radiator. If none of this work, call mechanic (there could be some of yous forward lamelas are gone). Usually if you open box you change all gears new. Good lack,
hello, I have a problem with my 580G house, it works in reverse, but in front of it the clutch slips.. do you have any idea what it could be? thank you.
I had similar problem. I did not play with oil (ATF) cooling system long enough to see if that could fix the problem. I went strait to change lamel in the power shift box. If I am you I will check any leak of oil and how is cooling works before going to major work and opening box. Hope this help,
Hello great videos keep up the good work just wondering what tire size are u running front and rear i just bought a 580g 4x4 but it is running the rong tire tire size thx for any tips
Hi, I am traveling right now. I will get back to you which tire I have on my 580G sometimes in April. Thanks for your kind words!
Rear tires are: 16.9-28 .14. PLY Rating Industrial Tubeless IND80, Front tires are: 10.5-20 MPT-04 Tires are from Turkey. I am not sure what this MPT-04 on from tire means. Hope this will help, Regards,
So is "Haw" the backhoe ? .....I am confused ....
Typo...
@@retirementrevolutionadvent7602 Naw.....Realley ? ...
Mister, what year is this backhoe? Brasil 🇧🇷
Very good mister the work. Brasil 🇧🇷
Thanks!
What are you going to grow here? Looks like fun!
I will plant new plum trees on these new made lands.
Kant hear music and taking and tractor .
Good job! Parts for these backhoes are readily available where I live in Arkansas. Case made som e really good equipment in the 70’s and early 80’s but the started to get way to fancy with the engineering and ruined them in my view. They were made to dig and load now they’re made to drive with ac and heat plus the radio playing. Way to many things in the way that just breaks anyway. Thanks brother we’re ever you guys live.
Thanks for kind words! I agree what you said about old and new machines.
Imas pumpe za ove bacve od 200 lit. nisu skupe.
A morat cu kupit jednu!
Powershift oil level must be checked when engine is running. Greetings from Santa's Finland.
maybe on newest machines, but on old you check when is cold and settle - that what my mechanic told me!.
Turn off the bloody music all I hear is you mumbling.
tempted!
Just do it. You could not make a mistake. Just be a careful.
Bitno da se on pravi Englez a to da traktor stavi u sporiji snop brzina ne može valjda zbog ove muzike
All the bells and whistles. Just wonder why the European machines have such a narrow stance for the outriggers/stabilizers? Almost seems pointless
Agree, ...
Wow in you element - keep enjoying retirement Petar, looks like you are doing quite a bit of work for a retired guy
Thanks Brock for your kind comment. Yes I am doing quite a bit of work but only so much that I enjoy it. As soon as enjoyment stops my work stops. Cheers!!
Just the info I needed to help on my project. However, the camera work caused confusion. At times hard to tell it the camera was upside down or what.
It is possible that camera was upside down. It was really hard to get everywhere proper camera angle.
I got one same problem 😭
Just do what I have done. It works!
Usefull video but please avoid the music, we cannot hear what you say.
I will try, Thank you for suggestion.
Wooow amazing job !!! I have the same issue but I have a warranty maybe they should be able to take the stand out for me I’m travelling soon and I need it to fit my suitcase
Make sure that you will be able to put it back!
@@retirementrevolutionadvent7602 No I won’t put it back on but will have the iMac 🖥️ on the wall
Coupler is slinding in shaft ie. if you need to change the belt, you need only open those coupler bolts, and slide coupler in a shaft. There is small cap where you can put the belt. No need to remove pump or cooler.
Thank you very much - I will remember that!
Did you change your bucket
No I did not.
I noticed to different buckets
👍👍👍👍😊👏
Thanks,
Pozdrav..imam pitanje u vezi kombinirke case 580g.Dok je hladna pri kretanju unazad na leru odmah krene dok pomicanjem rucice unaprijed krene pa zastane.Dodavanjem gasa krene tek za 3-4 sekunde i kad se zagrije jedino na vecem gasu krene naprijed. Kao da proklizava pa naglo povuce. Ulja ima u spojci i cisto je ali bude prevruce na dodir.Kao i sama spojka..Ako imate neko misljenje u vezi tog.Hvala unaprijed!
Ja sam imao slicnih problema dok nisam promijenio lamele. I sada kad se zagrije odnosno kad se puno gura ili vozi sanjom postaje nejaka. To izgleda ima veze i sa drugim dijelovima stroja (spojke, mjenjac i ostalo) ovisi kako je sve staro i sevisirano. Probaj naci nekog dobrog mehanicara da on dobro sve vidi i testira i dadne ti svoje misljenje.
oh my god !! I have the same problem like you !! And for me its impossible todo that ! Your solution was perfect !! 😂
Thanks for recognizing my efforts.
لدي case580g لاتتحرك للامام ما المشكل
Thanks,
Great ride. Still have mine
Right on!
Excelente.profissional.parabéns.
Gracias,
Muito.bom.trabalho.ja.montei.alguns.desse.parabéns.tudo.de.bom.
Thanks,
Give it some throttle. Your RPM is way too low to make any digging power for the hoe!
Thanks, will do it!
We wanted to see the backhoe operating.... not your grass and trees on your property!
Just ignore grass, ...
لدي آلة مثلها
Thanks!
Helo mister. Excelent work! Go part 2! Brasil
I'm working on it
4x4كيف يعمل
Thanks
عمل جيد
Thanks!
Ll
Thanks!
The music is good. Backhoe is very good. I have a Newholland LB90 year 2010 and a Case 580H year 1987. Brazil
Thanks!
Very good mister. Brazil
Thanks!
awesome man
Thanks!
Where abouts are you at? it looks like a pretty good machine that will have a pretty good amount of work left in it at the end of the day? So I subscribed and thanks for making the video, Cheers from Garry From Australia
Thanks Garry for a kind comment. I am form Canada and going to Croatia (where I am originally from) very often and making a videos along the way. Cheers, Petar
@@retirementrevolutionadvent7602 que.legal.meu.bisavo.era.de.lá.também.
Hello dear,,,are you from Italy,, ?
No, I am not from Italy,... Sorry.
@@retirementrevolutionadvent7602 Ok 😇
Moze par slika gdje su osiguraci ?
Struja je completno preuredjena i osiguraci su ispod comandne ploce. Tako ih je auto elektricar instalirao.
Momentalno nemam slike od osiguraca ali imam video od cijele pruredjene instalacije i to cu postaviti uskoro.
Dajte mi recite posto smo mi slagali getribu koliko ulja ide u nju i koje dali je atf i dali je pumpa kriva sto bager ne zeli u 4 brzo ic ili je invertor
@@danijelvnucec9781 Ide malo manje od 7 litara ATF ulja to vidis kada lijevas i kad ga malo provozas. Zasto nece u 4 brzinu moze biti vise razloga, to mora vidit netko ko zna.
What year was it built and what engine does it have?
It is 1985 year and has Perkins engine in it.
Engine is David Brown ad4/55, same as it is in David Brown 1390 etc
European model.
Keep it up"Nice.. Your content deserves a service like P r o m o S M!
Much appreciated!