Відео

The barrel can be a little rocky because of the length of it. Have you made sure all the screws are tight. I also modified mine to make it shorter which was hard work to do but can be an option to protect the barrel.

If I had to chose between the 2 would be the scar H just because its durability and how robust it is. If you’re looking for a cheaper option the scar L is cheaper to buy.

@@gazhinson88 yours one is still going great with stock parts?

@@laylaylomadam8450 that one I have has Ben upgraded new mossfet and barrel and has a new motor installed. I’ve spoken to people and their stock versions are really good.

Hello thanks for the comment. Yes they are aftermarket sights they where something I put on but never got round to taking them off.

I’m afraid it doesn’t.

Thanks for the comment. Yes absolutely finding one small enough was hard enough. That’s why I went for the idea of the battery box on the side. Was a lot easier.

Hello thanks for the comment. It’s an MP5 replica and it’s made by a company called BOLT.

Thanks for the comment. If your are referring to the sight rail that has bolt swat on it that did come with mine when I brought it. Really sorry to here that you didn’t get one with yours. Most airsoft retailers should sell them.

Hello thanks for the comment. It’s a bolt swat tactical. The hand guard is fully railed for the use of various attachments.

You can use red gas in cold seasons yes. I believe that’s what it is designed for.

@@gazhinson88 i want to ask 1 more thing what is propellent gas

@@efestoyanov9363 hello propellant gas I believe is HPA high pressure air which is attached from a line to your gun to a tank it’s slightly weaker than green gas which is used in most airsoft guns in warmer weather red gas in the winter. HPA is good because you have more capacity with the tank being quite large.

@@gazhinson88 and does propelant gas have silicone oil

@@efestoyanov9363 that is a very good question I believe the gases i have used have silicone oil already inside them. I haven’t used it separate.

Hello thanks for the comment. That’s an interesting point have you checked that the catch you use to adjust isn’t locked back to far because you can lock it back when you change the stock but you have to make sure you don’t lock it back all the way to secure it. The stock is very temperamental and can be a pain you just have to make sure the catch is in the right position.

Hello thanks for the comment yes im still more than happy with it. I used it a few weeks ago for a skirmish day and still never fails to disappoint. Only thing I would change is a longer inner barrel and hop rubber to increase the range a little bit for CQB situations is fantastic. I hope you manage to get your hands on one because they are difficult to get at the moment. If you do enjoy and I hope you have the same experience I do each time using it.

@@gazhinson88 thanks Gary! On your recommendation I have ordered one 👍 (hopefully this will assist your UA-cam/influencer endeavour! Have you found any mid-cap mags that work well?

@@knighthawk3559 hello I use the cyma magazine I believe they are around 220 capacity. Enjoy I love mine so much take good care of it and it will you.

@@gazhinson88 hi Gary, sorry to bother you again. My gun turned up and I have got the cyma mags too. They are really tight in the mag well. Did you do any modification to fit yours?

@@knighthawk3559 hello yes sorry I forgot to mention that I just filed down both sides of the top of the magazine. I remember them being fairly tight.

Hello the small adapter that allows you to mount a 14mm CCW thread suppressor you would have to purchase that separately. If you buy the modular suppressor it’s comes as a standard 16mm CW thread but you can also buy the modular 14mm CCW adapter.

@@gazhinson88 ok thank you! Do you recommend the TM mk23 or ssx23? I have a maple leaf bucking and 150mm barrel that should fit either one. (was in my aap-01 before it killed itself!)

@@BLITZEXTRA thanks for your comment I recommend the SSX-23 reason being is that it’s pre upgraded out the box so you don’t have to spend a ton of money on it like you would on a TM MK23. The ssx is my secondary and really love it.

@@gazhinson88 Ok thanks! I've heard there is no support for the inner barrel on the ssx23 so it's not as accurate as a upgraded tm mk23 and is apparently just a modified asg mk23 (the cheapest mk23) if so a upgraded TM MK23 should perform better? Have you compared your stock ssx23 to your mates upgraded TM MK23 when it comes to performance?

@@BLITZEXTRA to be fair the barrel can be upgraded if you wanted to but it’s equally as good as a stock MK23 stock barrel. I haven’t upgraded mine and its just as good as the TM that has been upgraded. The reason i didn’t go for a TM was purely how much it would cost and what you have to put into it. I’ve found the support really good most TM part are compatible if you feel the need to upgrade.

Thanks for the feedback I’ll bare that in mind for the future. We have actually sold this one on now. It’s always good to learn something new so i appreciate it.

Hello thanks for the comment. Yes the flash hider is removable so that you can install a suppressor or tracer unit etc.

@@gazhinson88 Thanks for the answer do u think this silencer can go on the mp5 :www.blowbackshop.ch/produit/madbull-gemtech-raptor-ii-mp5-silencer/ thannks a lot

@@BaptistouRanech I’m not so sure as looking at the end I can not see any threads would need to be a 14mm ccw thread to fit on this mp5.

@@gazhinson88 ok this silencer is ez for the mp5 because the mp5 have 3 half circles around the canon but i dont know if this model have these 3 half circle if we take of the flash hidee

@@BaptistouRanech on this model if you take off the flash hider it will reveal thread for you to screw a suppressor to.

That is a very good question. It’s one I really couldn’t answer because I’ve not studied the TM P226E2 before. From looking online I can see that it has a good build quality as it’s a sniper back up pistol. The gold match is very plastic made and I felt like some sort of alloy would have been good. Both can be upgraded to your desire and i do like the feel of the gold match considering it is all plastic. To try and answer it I would say the p226e2 look like a solid build the top slide does look more durable than on the gold match. I’m guessing it all depends on what loadout you have and what you really need the pistol for.

@@gazhinson88 Thanks a lot Gary for the suggestion. It helps. Actually this is my first blowback pistol, just for collection and backyard plinking.. Did hate the CO2 guns as I do not like CO2 fitment as most of them are prone to leakage with high maintenance cost. But I am still confused with one thing here friend. TM P226E2 is actually Full plastic (not sure about internals), but Gold match has got Metal Frame, metal barrel, including metals parts under the slide too. How come P226E2 is still more durable? Is it really that durable though it is full plastic? OR does the P226E2 has got metals under the slide just like gold match? Also about upgrading, sadly I am from this country India, where we are even finding hard to find just Airsoft guns itself. Hence we do not have the choice of upgrading them to anything. We are narrowed to just buy the gun and use them out of box until it breaks down. Hence I am look for a much durable gun our of box.

@@rajivindira hello mate thanks for the reply. Yes C02 are very prone to leakage that’s why I don’t tend to use them. My pistol of choice is a nine blow back mk23 sort of style. The gold match does have metal internals but the reason it’s mostly plastic especially the top slide is because it can cycle a lot faster when firing. I wish I could help you more with differences between the 2. I guess they are both plastic build. But the gold match is very well made. It shame because living in the UK it’s very easy to access and weapons and upgrades etc. I do believe the gold match is the more expensive unit out of the to pistols. I’m really sorry I couldn’t answer your questions the way you may have wanted me to I’m still learning a lot myself. I will say one thing is that the gold match is a great gun loved playing with it and looking at it in further detail. If your not into gas pistols take a look at the mk23 platform the magazines have to contain gas but the nine blowback system is great.

@@gazhinson88 Nothing like that, you were pretty helpful.. Even I too liked the Gold match because of its manly look.. But the only reason I am leaning towards P226 is its compactness and extra de-cocking feature.. But yes in the end, all the we want is durability for each penny we pay.. You guys are lucky to buy and enjoy stuff like HK MK23, I was only able to buy the much much cheaper TM's HK P30 EBB, on which the motor blew off, was a junk and now a real junk.. As of now I only have these two option to buy in the whole country for some reasonable pricing - P226 and Gold match.. Anyways thanks again Gary.. TC.. ❤️

@@rajivindira your absolutely right the P226E2 is very compact. In my opinion less bulky than the gold match cut in terms of performance i can only speak for the gold match because I have held and tested it and it does look cool. Yes we are very lucky to be able to do and purchase what we can over here. I only hope that one day it will be the same for your country. Both to me are very superior depending on what you want and yes what you want to pay.

The polymer constructions is quite solid very similar to the reel steel the front end alloy rail and barrel balance the weight. I wouldn’t say it’s made of crap at all it’s my primary when I play Airsoft in my opinion is very reliable. Approximately 320 FPS on 0.2 BB. How ever I recommend 0.25 and above for better accuracy.

@@gazhinson88 hmm, thanks for the info, does it have a quick change spring? Do you think it could handle a more powerful spring like an M120?

@@ThelVadam7777 unfortunately it doesn’t have a quick change spring but there is not reason as to why it couldn’t handle an upgraded spring.

@@gazhinson88 ok, thanks for your help!

@@ThelVadam7777 no worries thanks for commenting.

Hello thanks for the comment the wheel is on the bottom is what feeds the bbs every now and again you have to wind it.

@@gazhinson88 thanks

i was also wondering what a magazine charger is as it says in the instructions u need a charger

@@hughoneill3503 thanks for the reply the charger you require is a standard lipo charger for the battery if that what your after

@@gazhinson88 thanks keep upthe work

Thanks for the reply yeah it looks amazing. To be fair I was only running 7.4 Lipo could with stand a 11.1

Thanks for the comment I bet your absolutely buzzing for that enjoy.

Thanks for the comment thank you for the good feed back that mean a lot. It’s a good hobby and sport can be very expensive at times but you’ll love it. I have spent so much in my 3 years and don’t regret it. Yes this gun is very hard to get hold of I was very lucky to acquire mine enjoy and welcome to Airsoft.

@@gazhinson88 Thank you. How reliable have you found this gun, I have read some issues about jams. Its my first AEG but I think it wont be may last. ;)

@@lukedw73 hello mate I haven’t had any jamming issues at all to be fair I tend to use no lower than 0.28g bb. In my opinion it’s really reliable hasn’t let me down enjoy you will love it.

@@gazhinson88 Thank you sir, you are a gentleman. :)

What's the UK full retail price please? My mate wants £300 with two mags!

Thanks for the comment mate. I haven’t had any problems with the magazines at all I have about 5 of them I’m total the hop up also hasn’t given me any issues but then again it’s really my go to weapon. I use it every now and again. I don’t really do gameplay videos as I don’t have a decent head camera plus with taking my little lad I’m always looking after him so it’s a lot to set up. My experience has just been from research has and speaking to a lot of people I have been doing Airsoft for around 3 years now. I would generally play once a month but with the pandemic it’s been really hard also with trying to sort future reviews out. Appreciate the comment tho thank you.

Thanks for the comment. The battery can be a pain in the arse to install you have to buy a small ish size battery to fit inside due to it being front wired. One that will just fit inside you have to place the hand guard at a sort of angle so the back slides into the gun first then push up. As I said the battery need to be relatively small for it all to go back together. Failing that you can buy a battery box a peq box you can mount on the side if you have the rail system on the side the battery fits into the box and you loop the battery cable through the hand guard. One of my videos does explain the above.

Hello in ordered mine from a company called bomb up Airsoft.

Hello thanks for the reply. The recoils isn’t as strong as gbbr. You do get a slight kick even more so with the hard kick recoil. The gbbr recoil is more superior.

Hello thanks for the comment I believe it would be a great investment. I use it as my primary and it’s really good and solid. I have modified it since the video but there are a lot of other variants out there. You can get them with a rail system attached for the use of torches lasers grips etc. This one only comes with the top rail and folding grip. In my opinion yes it would be great which ever model or variant you chose.

Okay thanks very much for your advice, I have another question, what kind of scope should I use with it?

@@leirishboy that is a very good question I tend to use a set of flip up iron sights. The ones that come with it are not very good so I brought a better pair. I also tend to use a red dot sight I purchased a valken one off Amazon.

@@gazhinson88 thanks very much for the advice, I appreciate it a lot! :)

@@leirishboy not a problem at all anytime.

Thanks for the reply. If it belonged to me then that’s something I would possibly think about.

Thanks for the comment my friend. It’s always a learning curve for me when I’m wrong it’s what helps me you seem to know your stuff and it’s exciting to learn form more experienced people. The specs i mentioned I did find these online which I understand can be wrong. I went by what I could find at the time. Thanks for putting me right tho I appreciate it.

Thank you appreciate the feedback.

Hello thanks for the comment. Yes it’s in perfect working condition.

Hello thank you for the comment. I purchased mine from a company called bomb up Airsoft.

Hamdi Can Ozdemir hello thanks for the comment the upper receiver is made from a mixture of alloy aluminium and steel for a realistic look and feel not to sure about stamped steel.

@@gazhinson88 thanks for the reply, sir :) appreciated. I saw from a Canadian airsoft shop specification part which says stamped steel. Good video by the way :)

Hamdi Can Ozdemir thank you. The specifications over here in the uk just state aluminium and steel but it does feel great and the build quality is brilliant has a good weight to it looks and feels exactly like the real steal.

Thank you.

I’m afraid I don’t have one to review but I’ll keep an eye out for one. Thanks for commenting tho.

I do use a 7.4 lipo in this gun. I would imagine you can use an 11.1 yes.

@@gazhinson88 ok thanks fo your help

No worries at all

Hello thanks for the comment. Mods inside are Extended inner barrel upgrades to a 6.03 tight bore The battery connection has been changed to deans connection in my opinion better power from the battery. Titan gate NGRS advanced ETU fully reprogrammable using your smart phone. Rate Of fire and a mixture of other settings. R-Hop setup for maximum range and will be cable of hopping heavy weight bbs .4s and higher etc. Samarium cobalt motor. All these upgrades are class 10 Prometheus upgrades. A lot of money has gone into this one but I’m guessing you could install a few stages below like class 5 would still make a difference. An absolute dream to shoot and the range is insane.

Just want to correct you to say it doesn’t come with a mini tamyia battery connector. As stock they use preparatory batteries you have to have them converted to a different connector.

@@Rageophile hello thanks for the comment. I appreciate your comment because like I said in my very first video if I get something wrong make a mistake etc it’s nice to be told I’m still learning lol. Your absolutely right they do come as mini tamiya as stock.

@@gazhinson88 lol you said it again that they come with a mini tamyia. The SCAR’s and AK’s come with mini tamyia the 416’s and M4’s apart from the 416 with the collapsible stock come with the TM sopmod battery, witch is proprietary9 something volt NIMH battery that’s why they come with that little connector in the box to allow you to charge the sopmod battery on a smart charger. I own the M4 CQBR and SCAR L :) Good review though.

@@Rageophile thanks mate I stand corrected thank you for the feedback

Thanks for the comment yes it’s something I intend to do in the future.

Thanks for the comment. No problems with the gun at all absolutely spot on. Like I’ve said before it has a fantastic build quality well made. An absolute dream to shoot.

@@gazhinson88 Thanks for the fast reply! Cheers!

Not a problem at all please feel free to subscribe and watch the other videos I have done. I will be posting more very soon.

@@gazhinson88 I bought the Bolt SwatK, one big annoyance is that the female Tamiya connector is in the gun and the male connector on the battery...... :( Makes charging a bit difficult, but I'll have to make an adapter... But the gun itself is pretty hefty and I fancy the recoil. Something about mp5's

@@apathtrampledbydeer8446 hello thanks for the reply yes I’ve heard of the adapters but I believe the battery connector on the mp5 is male on the gun would have to double check that. The bolt realism is brilliant you don’t get as much of a kick like you would with a 416 but you can feel it. I have planned to add an extended inner barrel on it but it’s a fantastic gun I’ve had it nearly 2 years and it’s not let me down.

Good question mate however I have removed the grip as it’s not very good. I’m sure you should be able to attach a different front rail.

@@gazhinson88 Would that require changing the barrel or do you believe that you could "clamp" or somehow attach a rail where the current grip is sat?

@@Pritchii I’m guessing you could weld something there

Hello my thanks for the comment. The rails on the one I was reviewing where metal.

Mate this rifle is amazing. Yes your right I’ve had it awhile now and it’s never let me down. No breakages or anything. It’s also available in different variants depending on what way you want to go with it. Good build quality very strong

Tsurreal hello thanks for the comment. bombupairsoft.co.uk/ this is where I purchased mine from.

You could also try patrolbase.co.uk they have a range of bolt mp5 available.

Big Henny in my opinion the build quality is absolutely fantastic it is quite weighty but feels excellent when you hold it. The retractable stock is a little wobbly when fully extended however I only use it on the second stage. Very reliable I’ve had this well over a year and had never let me down. I recommend using a small lipo battery with it being front wired. If they are hard to come by then you can fit a dummy battery box on the side. You would be blown away with it worth every penny I paid.

Big Henny also I forgot to mention thank you so much for the comment it means a lot check out some of my other reviews and I have more to come.

@@gazhinson88 thanks for getting back to me so soon I've been looking around and ive found a TM mp5 but even thats not perfect but being a TM its going to be reliable, I think I'll need to do some more research before I take the plunge, I've just subscribed and I'll check out some more videos thanks again

Big Henny your very welcome I will be doing a loading and shooting test of the gun so that people can see the bolt feature in action. I’ve been off for a few months because of the kids being off but now they are back In able to concentrate on more. I do like TM have reviewed a few they are very reliable my only qualm with them is they are good out of the box but to further progress you have to spend a reasonable amount to upgrade it to it’s full potential.

@@gazhinson88 Have you had any issues with it at all? Guy up there said he had issues losing the hopup and it seems like the older model Bolt AEGs had some reliability issues....

emir a a Thank you mate appreciate it.

I did get mine from bombupairsoft

@@gazhinson88 Ahhh I'll check it out and see if they got any in stock. Thanks.

Prankster Lololol no worries

Thank you for the reply most appreciated