- 16
- 23 325
B Schwar
Приєднався 12 лют 2013
2000 Corolla fuel lines replacement- linestogo.com
Got these new lines from Linestogo.com, they worked out perfectly, not a bad install if you have a lift but could be tricky if you don't.
Переглядів: 2 825
Відео
2015 GMC Yukon Rear Taillight Fix Tips
Переглядів 7092 роки тому
The way that I fixed my taillight for no out of pocket costs so long as you have the tools. Note the rubber cement didn’t work well for sealing it back up so I used some silicone caulk.
LG Dryer DLEX2501V won’t heat High Temp sensor fix with Freeze Off
Переглядів 1713 роки тому
I fixed my dryer high temp/thermal cut off switch with a can of freeze off and tapping the back of the switch with a screwdriver.
M35A2 Deuce and a Half aftermarket radiator installation
Переглядів 2,7 тис.3 роки тому
I changed out the stock radiator for an aftermarket one that can be easily found and replaced if needed. EDIT: This is a 4 Row radiator for a 1955-1959 Chevy truck, I said GMC in the video. The other parts are a Black Silicone Hose, 1 1/2 x 2" 90 deg. Reducing Elbow from Pegasus Auto Racing, and a ICT Billet 2" to 2" Inch Hose Barb Splice Coupler which I found on Amazon. I made the brackets fro...
Daytona 4 Ton Jack Review and Test
Переглядів 1,8 тис.3 роки тому
Tested on a bobbed deuce and a half or M35A2
Severely frozen brake rotor removal Part 2
Переглядів 145 років тому
Severely frozen brake rotor removal Part 2
Severely frozen brake rotor removal Part 1
Переглядів 45 років тому
Severely frozen brake rotor removal Part 1
Fixed Running Boards on a 2006 Lincoln Navigator
Переглядів 4,6 тис.6 років тому
You can use Westin 2006 Ford Expedition running boards on a 2006 Navigator.
2012 Honda Civic LED Tail light Install
Переглядів 7 тис.9 років тому
Installation of Eagle Eye LED tail lights for a 2012 Honda Civic EX 4 door, this set will not fit a coupe. I purchased this set from revotec on ebay. The set is very well made and is DOT approved. Update 12/14/17 Led lights still work great and nothing has failed in the unit. Love it and would purchase again!
Windows Technical Suport Scam Phone Call
Переглядів 1879 років тому
This guy has called my house on 3 or 4 other occasions. I told him in the past that I have a Mac and to stop calling. This is a scam, they say they are going to fix your computer but then you have to give them a credit card. I decided to mess with him this time. Perhaps he won't call again.. Hope you enjoy!
Driveshaft Clank Sound part 2 of 2
Переглядів 22710 років тому
I created this video with the UA-cam Video Editor (ua-cam.com/users/editor)
Driveshaft Clank sound M35A2 Part 1 of 2
Переглядів 1,1 тис.10 років тому
The sound turned out to be a bad U joint.
Doing some Donuts in my Deuce and a Half (M35A2)
Переглядів 1,4 тис.10 років тому
Took me about a minute to figure out 2nd gear was the way to go.. I edited that out for ya.. Not as easy as it looks without power steering..
MEP-002 Running Normally
Переглядів 31811 років тому
Now that the unit is timed correctly and also retrofit a new fuel line made from brake line and some brass fittings from Home Depot.
what is the correct fuel size lines? I have a 2001 Toyota Camry LE. Thank you.
About to install mine. How does it run without a shroud?
Thanks for posting this, gotta change the lines in my 02 Corolla and linestogo is literally the only place I can find prebent lines, even the Toyota dealership didn't have any. Might give these a shot.
If you have sticking running boards, replace the bushings. Here is my video series on the process. ua-cam.com/play/PLoz-2IH4A2KsZiDXB0f-hhKZtAzO_wuO_.html
Daytona 4 ton would buy again and again
Could you drop us a link to the exact radiator that you bought? I found one online that comes with 2 electric cooling fans. (I'm aware there 12v, I'll get a transformer 24v to 12v to run the fans)
Sorry the ebay link I had no longer works just search for a 4 row radiator for a 1955-1959 Chevy truck and that should bring up one that would work.
@@bschwar818 i found one for a 55-59 Chevy with a electric cooling fan with a thermostat to turn it on and off. I had just enough room to clean the water pump! I bought a 24v to 12v transformer to run the cooling fan.
How did u get the vapor line into the engine compartment its the longest line I struggled getting it thru where the steering rack is I' know I bend the line some forcing it but it's so frustrating I hope the company can give me a new line or tell me how to get it in there
well got my BBC from a 1966 chevy c60. Now looking at a radiator swap. Trouble is the gm 366/426 tall deck has a 2-3/4 lower hose and a 2" upper hose. Cannot find any radiator with that combo. Are you seeing cooling issues with the reduced radiator hoses.
Thanks 👍👍👍
I’m thinking of doing this also, do you have a link for the radiator you used?
great Idea Thanks Subscribed
good to know. I'm currently looking for a c70 with a big block 427 and air brakes to rob the engine from. It can be bolted directly to the 3053a, and will have a compressor for the brakes. With stock everything, including 9.00x20 tires that would put you at 3200 rpm at 65 mph. Right in the happy spot for that engine. Much better power and torque than the multifuel and far better parts availability. Im building my m35a2 to be a daily use large pick up.
@@hummerguy the oem spicer 3053a has a .85 overdrive. So yes you could swap to a different transmission. But this transmission is very short, there isn't any room to move the transfer case rearward without screwing up Driveline angles. The factory engine is roughly the size of a International DT466. And there is absolutely no room to move that big engine forward. With a 6bt Cummins you might spare maybe 6 inches length that you could move the engine forward to add a longer transmission. But then you run into the width of the transmission interfering with the front drive shaft. Transmission options realistically are kind of limited. Unless you stretch the frame of the truck. Not saying it cannot be done just saying that would take a lot of careful selection and measurement. The big block engine is so much shorter that my transmission options are now Limitless though LOL. Another thing you have to think about is the top loader differential on the front axle. Not every engine out there is going to have an oil pan that will work. The big block Chevy is going to be damn close as it is. So I will be mounting the entire engine higher up in the frame to compensate. With a larger diesel engine that won't be possible, because of hood clearance. It all makes perfect sense when you see it with the truck all taken apart. And see it before it was taken apart
Hello, how did you go about getting that grille? It's looks awesome, would love to have something similar on mine. Any info u can provide is appreciated
Ive search under the user and found revotec but cant find the actual tailights for him. Can u please send me the actual link that u used
Will you pleass provide me the EXACT link for these PLEASE. Ive looked for ever and cant find them
Leaking radiator over here. Going to swap very soon. Please link or specify radiator you purchased. Thanks! And great job by the way!
Looks like a nice install and a very nice quality radiator! Some of these older deuces can sure use a bit more cooling capacity, its generally because the radiators are old and in a lot of cases in dire need of a very good flushing to the entire cooling system, I like this a lot and it looks better than factory, nicely done!
Yea, those probably just need flushing, I never had an issue with the deuce cooling system but I accidentally and cut mines when I was installing a power steering pump
Looks good! I tried purchasing a 4 ton jack from Amazon already twice, the first time it came with a ripped box that was taped back up like if it got into a fight with a tiger on its way to me so I refused the delivery, the second time that I tried the box looked in decent shape from the outside even though I found it a little strange that it was in a plain brown cardboard box, when I opened it up I found out that Amazon had taken the floor jack out of its original packaging and put it inside a plain brown cardboard box with no protective styrofoam so all the pieces came scraped up with rust on the product, paint lifted up in several areas, the manual all torn up, the bottom of the jack looked like it had been hit really hard because some stuff was bent, and some of the screws were missing too. I looked around to see if any local shops sell 4+ ton jacks for trucks and the only place that I saw was Harbor Freight so i think ill go buy one from them when I return the one that I got from Amazon.
You ordered a 100 pound Jack thru the mail and thought it wouldn’t rip thru the packaging during delivery?
@@davespadegettah8593 I bet that delivery man hated dealing with a 102lb jack. I just bought one.
@@samsondog2182 probably so but it came in one piece and works great.
@@davespadegettah8593 glad your jack is working good.
So I ordered one and it came in too short. The distance between the top and bottom nipple won't clear the fan. Can you drop me a link? Thanks
kdj vun.fyi
Def get that shroud on there. Thanks for being the Guinea pig for us Deuce owners. Keep us updated.
Should have done more research, Aluminum radiator and electrolysis especially with a 24 volt system equals a few months at best lifespan.
I have never heard of this being an issue. With good, fresh coolant it should be perfectly fine. I would be open to reading how this is a problem though
@@davidm2232 Same
Add me to the list. I'd be very interested not only for my deuce but I'm working on a 24 volt electric vehicle and it will be liquid cooled.
@@jamesharper3314 I've been going with this radiator for 1 year and still fine
Sold. Thank you.
Thanks for the video are you having any trouble with not having a fan shroud
As an army diesel mechanic, I'm sold. Bought a blue one today! So excited to use it
Awesome thanks for watching!
Does anyone have the link to it? I can’t find them anywhere
Neither can I, weird.
How did you take off the old ones
Lol that u joint is in sorry shape
I am trying to put a fixed running board on my 2005 Navigator. Could you tell me which bolts/screws you used? And how many? - many thanks
I just purchased the same on ebay from revotec! I have a 2012 coupe and obviously i got the coupe version, how you likin these tailights? And hows the reliability?
Great years later still works great, just don't like the stock backup lights as they suck. I got running lights placed in reverse as my backup lights as I tow a trailer regularly.
I have found some that look identical (sold on several sites like Amazon) but the brand is ANZO and they got a bunch of negative reviews about them breaking within a month or 2. Do you know if these Eagle Eye ones are different?
don't know of that one may be a rip off, mine are still working great
I just ordered these for my Civic. These tail lights make the car look so much better. Thanks for the upload.
Any issues with FM radio static. I heard a few people that had this issue after installing LED tail lights. Looking at getting some for my 2012 Civic Sedan also. Thanks
I haven't noticed any static.
looks sick. need to get LED turn signal now.
i fucking hate the stock tail lights on my civic lol
I still like the lights and the look, they are holding up well. My only complaint is the reverse lights suck, you can't see anything. I upgraded the reverse bulbs to brighter LEDs and that helped allot
Looks like a truck backed up on your car coz I have the same problem right now. On left tail light as well. Btw. How's the tail lights so far?
So how are the lights treating you 2 months later? Just purchased these literally a couple of hours ago from CARID for $250 about to get my refund they are only $189 on revotec on ebay. Literally have the same tail light as you broken same exact way from a moped who wasn't paying attention and his handle bar hit my tail light.
Still working great!
B Schwar how the eagle eye taillight still working?
Still great, my only complaint is that the reverse lights are like candle light, so I just added some LED running lights under the back bumper so it's awesome now.
Haa....ha.. Funny how scammer felt sorry
Tunred out it was a bad U joint that made it sound like something was inside the drive shaft
Where did you get your truck from?
Got it off Craigslist! They're around if you look for them..
what was it? I have a similar sound...
Awesome !!!
Bad ass !!! We love our BIG trucks !! ua-cam.com/video/tROhar8Kr0s/v-deo.html
Yes, I had it timed incorrectly, the Flywheel turns twice with every revolution of the engine, I took out the IP and turned it one more revolution, re-intstalled the IP and now it runs great.