- 25
- 91 581
Human Oversynth
Приєднався 12 лип 2019
Overlay Installation for Chase Bliss Mood MKII (Mood MK2) Overlays
This video demonstrates how to install our overlays for the Chase Bliss Mood MKII (Mood MK2) effects pedal.
Here are a few of the features of the overlay design:
- Color-coding is used to indicate the two sides/channels of the pedal (Wet Channel and Microlooper Channel)
- Contextual knob functions are labeled and color-coded. For example, the 'Modify' knob on the Wet Channel controls 'Speed/Direction' when the channel is in 'Slip' mode. The same knob controls 'Feedback' when the channel is in Delay mode.
- 'Hidden Functions' are labeled next to the corresponding control, as well as instructions on how to access the Hidden Functions
- Instructions for storing presets are shown
- Ramp wave shapes (adjusted as a Hidden Function) are shown around the 'Mix' knob
- Functions of the left and right foot-switches are shown
- Cable types (TRS, TS, etc.) are indicated next to the corresponding jacks
- Dip switch functions are labeled
- Brief explanations of the functions of each of the DIP switches are given
- Dial position markers are provided for all knobs. In addition to being a visual aid while using the pedal, the markers can also be used to align the knobs if they ever have to be removed and re-installed.
Overlays are available now from: www.oversynth.com
Here are a few of the features of the overlay design:
- Color-coding is used to indicate the two sides/channels of the pedal (Wet Channel and Microlooper Channel)
- Contextual knob functions are labeled and color-coded. For example, the 'Modify' knob on the Wet Channel controls 'Speed/Direction' when the channel is in 'Slip' mode. The same knob controls 'Feedback' when the channel is in Delay mode.
- 'Hidden Functions' are labeled next to the corresponding control, as well as instructions on how to access the Hidden Functions
- Instructions for storing presets are shown
- Ramp wave shapes (adjusted as a Hidden Function) are shown around the 'Mix' knob
- Functions of the left and right foot-switches are shown
- Cable types (TRS, TS, etc.) are indicated next to the corresponding jacks
- Dip switch functions are labeled
- Brief explanations of the functions of each of the DIP switches are given
- Dial position markers are provided for all knobs. In addition to being a visual aid while using the pedal, the markers can also be used to align the knobs if they ever have to be removed and re-installed.
Overlays are available now from: www.oversynth.com
Переглядів: 223
Відео
Oversynth.com overlay for Lyra-8 -- Installation Instructions
Переглядів 7172 місяці тому
How to install oversynth.com overlays on Soma Laboratory Lyra-8 Overlays available now from www.oversynth.com
Roland SH 4D Overlay Installation
Переглядів 1,5 тис.6 місяців тому
These are the steps we recommend for installing our overlays on the Roland SH-4D synthesizer. First, you will need to remove all the front panel knobs and slider caps. The video shows our recommended method for removing the knobs. Once the knobs are removed, take off the backing from the adhesive strips on the back side of the overlay. Then, place the overlay over the front panel of your synth ...
OBLINEAR SEQUENCES - Inframinimal Soundpack For Dreadbox Typhon
Переглядів 1,3 тис.Рік тому
OBLINEAR SEQUENCES is available now at www.oversynth.com This video demonstrates several patches from the OBLINEAR SEQUENCES soundpack for the Dreadbox Typhon synthesizer. Each patch contains a sequence which showcases how the sounds were originally imagined to be performed. In this video, the sequences are playing automatically without any additional MIDI or FX. You can edit the sounds and seq...
Behringer Crave Overlay Install -- Oversynth.com
Переглядів 11 тис.3 роки тому
This video demonstrates how to install the Oversynth.com overlays for Behringer Crave
Korg Electribe 2 Adhesive-Backed Shift-Function & High Visibility Labels -- www.oversynth.com
Переглядів 5293 роки тому
This video demonstrates the Oversynth.com adhesive-backed Shift-Function and High Visibility label kit for Korg Electribe 2 synths and samplers.
Overlays / skins for Modal Skulpt and Craft Synth 2.0 -- www.oversynth.com
Переглядів 7333 роки тому
This video demonstrates how to install adhesive overlays (skins) on Modal Skulpt and Craft Synth 2.0 synthesizers. Also, a rabbit. Overlay skins and sound packs for the Modal Skulpt & Craft 2.0, and other synthesizers can be found at www.oversynth.com
Distorientation Model Skulpt Soundpack
Переглядів 2,9 тис.3 роки тому
This sound pack is a collection of 64 dark ambient / SciFi presets for your Modal Sculpt synthesizer. Like an impossible memory of a dystopian future, these sounds are at once dirty, noisy, barely in tune, warm, harsh, dreamy, and nostalgic. The patches in this sound pack will make your Skulpt sound like a modular synth that was dropped in a in radioactive saltwater ocean and forgotten about fo...
Ambiente Oscuro -- Sound Pack for Modal Craft Synth 2 0
Переглядів 3,8 тис.3 роки тому
This sound pack is a collection of 64 dark ambient / SciFi presets for your Modal Craft Synth 2.0 synthesizer. Like a child waiving out the back window of the last spaceship leaving a dying planet, these sounds are at once harsh and hazy, somber and sinister, noisy and barely in tune. The patches in this sound pack will turn your Craft Synth 2.0 into device for generating deeply mysterious soun...
Live Performance - Moog Subharmonicon + DFAM [Oversynth.com Overlays]
Переглядів 1,1 тис.3 роки тому
This is a live performance using a Moog Subharmonicon and DFAM, both with overlays from www.oversynth.com
Oversynth Coding System -- For Deluge Overlays & Guide
Переглядів 1,1 тис.3 роки тому
This video explains the cipher coding system used in the oversynth.com overlays and downloadable 'Command Guide' for the Deluge. www.oversynth.com
Synthstrom Deluge Overlay Installation
Переглядів 1,5 тис.3 роки тому
This video demonstrates how to install the oversynth.com overlays on the Synthstrom Deluge. www.oversynth.com
Reckage -- Soundpack for Synthstrom Deluge
Переглядів 8263 роки тому
This is a demonstration video for the RECKAGE dark ambient sound pack for the Synthstrom Deluge synthesizer. Available from www.oversynth.com West Coast Style Synthesis, Dark Ambient, Dystopian Soundscapes, SciFi, Deep focus, Investigative, and Contemplative This sound pack contains 51 original patches for the built-in synth engine of the Synthstrom Deluge synthesizer. Explore the sonic ruins o...
MicroKorg Overlay Installation - oversynth.com
Переглядів 3,1 тис.4 роки тому
This video shows how to install the Korg microKorg overlay from oversynth.com To install the overlay, you will need to remove all of the knobs and screws from the front panel of your MicroKorg synthesizer. The four main screws can be removed using a 3/32" or M2.5 hex key wrench. The two parameter selection knobs can be removed using a 1/16” hex key wrench. These hex key wrenches are common item...
BACKGROUND RADIATION - 128 Patches - Dark Ambient, Dystopian, SciFi - For microKORG & MS2000
Переглядів 6 тис.4 роки тому
Sound Pack available now from www.oversynth.com This video was recorded straight from the microKORG's output to a Zoom H6. Minor compression was used while editing the video. No other effects or processing was used. West Coast Textures, Dystopian, Dark Ambient, SciFi, Deep focus, Investigative, and Contemplative Explore the dark meditative side of your original microKORG, microKORG S, or MS2000...
OverCycles Sound Pack For Elektron Model:Cycles
Переглядів 16 тис.4 роки тому
OverCycles Sound Pack For Elektron Model:Cycles
"DFAMation" Percussion Sound Pack for Elektron Model:Samples
Переглядів 5774 роки тому
"DFAMation" Percussion Sound Pack for Elektron Model:Samples
Teenage Engineering OP-Z Overlay Installation (www.oversynth.com)
Переглядів 4 тис.4 роки тому
Teenage Engineering OP-Z Overlay Installation (www.oversynth.com)
Moog Minitaur & Sirin - Overlay Installation
Переглядів 3,6 тис.4 роки тому
Moog Minitaur & Sirin - Overlay Installation
How To Install Oversynth.com Overlays on Moog Mother-32 & DFAM Synthesizers
Переглядів 3,4 тис.4 роки тому
How To Install Oversynth.com Overlays on Moog Mother-32 & DFAM Synthesizers
Overlay Installation -- Elektron Model:Samples
Переглядів 9 тис.4 роки тому
Overlay Installation Elektron Model:Samples
10-min Drone Inside Diner - Featuring DSI Evolver
Переглядів 3,3 тис.4 роки тому
10-min Drone Inside Diner - Featuring DSI Evolver
Korg MS-20 Mini Panel Overlay Installation - www.oversynth.com
Переглядів 5 тис.5 років тому
Korg MS-20 Mini Panel Overlay Installation - www.oversynth.com
Oversynth.com -- Behringer Neutron Overlay Installation
Переглядів 9 тис.5 років тому
Oversynth.com Behringer Neutron Overlay Installation
how do you practice outside? where do you get the power from? nice overlay!
I used a couple USB power banks for this outing.
@@avadad and then go with the normal power socket?? how do you go from 5v to 12volt?
These overlays are available on the website now... www.oversynth.com/roland-sh-4d-overlays
I went to your website but did not see any overlays for the SH-4D. Please inform me when they are available.
Sorry for the delay... the overlays are available on our website now.
I'm looking forward to the 2nd one you flashed as soon as its available on your website.
They're available now. 🙂
Twilight Zone Machine!
I know I’m late to the game but stumbled onto this video….. if I order a faceplate for my rack mounted neutron are the “nuts” going to fall down while installing? Do I need to remove the Neutron from the rack? Thanks!
I installed a similar overlay recently. The circuit board is screwed into the faceplate from the back so if you remove the nuts it won''t fall.
Very very clever. Will definitely be ordering mine soon ✌️
Thanks!
is the microKorg and ms2000 the same?
They have the same sound engine, so they can share patches. They have different interfaces however. The MS200 has more knobs, while the Microkorg has a small keyboard and is more intended for selecting patches and playing them with minimal customization.
It's such a powerhouse of synthesis that sadly was packaged inside a toy. Luckily it's cheap to buy bc of it.
These look great! Will you be making overlays for the Behringer Edge as well? :)
Dig the groove!
Looks amazing and Im contemplating ordering one but I dont think my fat fingers could handle such precision for the install... They do look beautiful though...
But why Glossy!
Mod:cycZz is addictive machine if you love knobs & sound scaping cinematic plus.🧠🎼 Sometimes just take it to 56 bpm'$ cause that's far down it goes. Set few trax on chance after dialin in pleasant frequencies and presto! Magic time machine 😵💫😺
Quite unique! Sounds that perfectly could have been done with big synths. Congrats!
Wow any of these overlays make it look so much better. If i end up going through with one of these I'll be picking up a set for sure.
I wish I had a typhon just to play with these patches!!’
If you can ever afford one and love synthesizers it is remarkable. And I'm sure you figured out by now the people that have been complaining in the past. This is only for ambient music. Absolutely not true. It inspires me to write horror and science fiction scores
is it easy to remove?
Hi! Thanks for your question! Yes, they are easy to remove, as they are not adhesive backed. The knobs hold the overlay in place. We put a very small amount of low tack adhesive on a couple spots on the bottom, but even that is very easy to remove.
I love the preset that starts at 1:52. Other than that one, I could pass, but would still love the pack for inspiration.
Hey!!, Nice work. New suits for our dear gear. ;)
Thanks!! ☺
is this expected to be back in stock eventually?
I bought this OverSynth sticker set for my Electribe2. See my review here: ua-cam.com/video/_YnAU3ChRTc/v-deo.html
Will you have the Schofield back in stock soon?
Yes! We will have all Crave overlays back in stock within the next couple weeks!
@@humanoversynth4405 Cool. Thanks
Excellent! Wow... very impressed! How long do these stay on? Any issues with peeling?
Hello! Thank you! To answer your question, the front overlay part is not a sticker. It does have a few spots where we put some double sided tape, which is a low tack adhesive, but the overlays are mostly held in place by the screws. There are some black vinyl stickers that go along the sides of the box to cover up the orange, and those should last a long time. You can always contact us at human@oversynth.com if you have any questions or if you run into any issues with any overlays you've purchased from us.
Would this work on the Radias? I keep hearing people say the Microkorg patches can be read by the MS2000 and also those can be used on the Radias. That’s what I ask. Any insight would help. Excellent sounds BTW
Hello! Sorry, no this sound pack will only work on the original MicroKorg, Microkorg S, and MS2000. It will *not* work on the Radias, R3, or MicroKorg XL synths since they have completely different sound engines from the original Microkorg and MS2000.
@@avadad thank you forgetting back
Awesome sounds. Are there any patch names for them?
Oversynth: The Out of Stock Shop that sells gorgeous but non-existing Overlays that would be made in the USA if they made them but they don't... The shop from the 5th dimension...
We have a number of overlays back in stock now. We're hoping to get most of our designs in stock by the end of February.
Love this patches.
Just installed this a few moments ago & tagged you guys on Instagram. THANKS A LOT!
These are dope
Can we design our own custom orders from oversynth? I use my Microkorg not only for synthesis but to control the trim, radiators, etc. in my flight simulators.
nice. i want it !!!
these are great dude, glow in the dark text wud be nice '')
Does it lay flat around the patch bay where there isn't much holding it down?
Yes, it lays flat. The front panel screws near the patch panel help to hold it down.
Are there any external effects here. ? I'm thinking about getting the model craft along with the Korg nts-1 for effects..
that tune sounds familiar! is it a cover of something or original?
Bro I so HAVE TO HAVE this for my CRAVE, are you able to do any Rastafari Color designs, I will pay?
you must really hate yellow lol, what if the thing peels off?
So this is for free otherwise whats the point spending extra money on a dirt cheap synth while you could spend that money on another cheap synth. Also that wont stick forever. But they look great I must say.
Picked it up, Thanks for making the Kits, they make it much easier to load with my patterns. Sounds Great!
What is the pedal next to the Crave?.
Thank you for creating this video. I was able to know that the noise waveform of CraftSynth 2.0 is useful, so I was able to decide to buy it.
Yesss!!are these still available?? They should have got u to design the crave lol
Yes! These are available on our website www.oversynth.com Thank you so much!
Hi, what if I ordered mine just like this one and it didn't come with any sticky adhesive on the back?
Hi JxPx9, if you are a customer, you can email us at human@oversynth.com and we will work to resolve any issues such as this.
What are they made of? Paper or plastic?
The top panel overlay is printed on a highly durable, waterproof, and chemical resistant polyester sheet material for maximum performance and long life. The black masking around the front and back edges is vinyl.
@@humanoversynth4405 thx!
How do you use/load the sample pack? I have Elektron:Ttansfer but I don't think mine is working right 🤷♂️
Hello. Installation instructions can be found on our product page... www.oversynth.com/product-page/overcycles-sound-pack-for-elektron-model-cycles
I had issues with mine, couldn’t figure it out till like five minutes ago. I had to first install the most recent update for Cycles from Elektron, it’s a .sysex file I think. Once I did that, it immediately gave me the ability to add folders and .mcpst files
Is it possible to use this for model samples?
Sorry, no. This particular sound pack is for the Model:Cycles
@@humanoversynth4405 sad :(
To each their own…but I think those overlays look horrible.
Have you had any issues with the build quality?
The build quality on the Modal synths have been great for me. Both the Skulpt and Craft Synth 2.0 are very reliable in my opinion.
I put coloured sticky dots on my Craft’s knobs, but I can see how- if I’m ever going to use the synth without the app- I need this overlay. Ditto the black Skulpt, though the SE is much easier to navigate around… Of course, if I’m going for these 64 presets I’ll need another Craft, will I not?