Відео

Thank you!

I draw my designs on the iPad in Adobe illustrator and then have my laser score the lines. After it’s cut and scored I paint by hand with acrylic leather paints.

Check out my videos about the leather long stitch books. I go into detail about preparing the leather and lasering

You can make them from paper or leatherette.

Thank you! It's called a living hinge that's cut with a laser. Watch the first video "Living Hinge Books" for a more detailed description of how to make these books. Purchase the file to cut the covers here: www.etsy.com/shop/GunterCreativeDesign

Thank you!

Sure! As long as you use a size that will fit your bed. I believe that’s 12x12. These are designed for using 1/8” plywood, so test your settings to make sure it cuts through cleanly. That’s one trick for making sure the hinge doesn’t break. If it doesn’t cut through perfectly, it is likely to crack.

thank you!

I’ve tried rolls but they are too hard to flatten. I like to use strathmore drawing paper in 18x24 pads and it’s 80# text weight. I think 100# would work too as long as it’s not cover weight/card stock.

@@guntercreative thank you for the reply. These are on my list of todos

Thank you!

It's called 3M positionable mounting adhesive and I buy it in rolls. Here's a link to Amazon. www.amazon.com/gp/product/B000JGQM1Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

hi! This is the hole punch I bought from amazon. www.amazon.com/gp/product/B00009L1WG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Thanks so much ❤

Hi. Do you mean the blue scraper that I use to get the masking off the cover? I have those from buying 3M adhesives. You can search for "plastic razor blade scraper" on amazon and find a lot of options for something similar. Most are blue with orange plastic blades.

Thank you! How would the fan binding attach to the cover? Could we still use the elastic?

sure you could use that method or another way :) @@guntercreative

I use this transfer tape from amazon. Burnish it down real good on both sides of your wood before you laser. www.amazon.com/gp/product/B085635HFN/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Thank you! I made these with a glowforge pro so not much power. It’s 1/4” thick plywood. I have a bigger laser now and do not need to do two passes.

3M™ 568 Positionable Mounting... www.amazon.com/dp/B000JGQM1Q?ref=ppx_pop_mob_ap_share

Sure! I got it from amazon. I'll put the link below. I use 3M positionable mounting adhesive on the back of my leatherette. It's sticky enough to keep it from gapping. www.amazon.com/gp/product/B00009L1WG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 www.amazon.com/gp/product/B000JGQM1Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Thank you. I bought the hole punch on Amazon!

@@guntercreative Ok 🙂 Thank you so much!

@@agnieszkaadamczyk1782 I was in a ruch when I answered last night. Here is the link: www.amazon.com/gp/product/B00009L1WG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Hi! You can buy the inside paper from craft stores like hobby lobby or Michael’s. I like to use drawing paper. I have a big art store (Texas art supply) in Houston where I buy decorative paper. I buy my waxed thread and curved needles from Hollanders.com. They have decorative paper too. Many of these supplies I think you can also find on amazon.

@@guntercreative thanks so much

Thank you! I buy the laserable leatherette from JDS browse.jdsindustries.com/main.php?r=frontEnd&view=front&jds-category1=16&jds-category1-desc=Laserable+Leatherette&jds-category2=136&jds-category2-desc=Leatherette+Sheet+Stock&jds-category3=979&jds-category3-desc=Leatherette+Sheet+Stock

thank you!

I'm glad my ideas are well received. thank you!

Thank you! yes, sell the books. Just don't sell the files or use the drawings on other products. Thank you for asking.

In this book I used 1/2 inch. It will depend on your book thickness. I have another video where I discuss the different Chicago screws that I’ve tried.

Thank you! It’s listed etsy.me/3JWMW9w