Відео

Thanks for the great comment. I really appreciate you watching!

@jmk.3943 Hi. As long as the locking pin is tightly secured, the plates should not slip or fall off. I have not had any problems with these so far. I hope this helps. Thanks for watching!

Hi there. So sorry for the delayed response. Unfortunately, the slot on the weight plate is slightly smaller than 1 inch. The opening is more like 7/8 of an inch. Hope this helps. Please let me know if you have any questions. Apologies again for the wait.

Hi there. Thanks for the great question. Given the types of brands I have access to in Hawaii, I am happy and do not regret the purchase. There has been some wear and tear with the plates but just cosmetic. Hawaii is very humid so there is some rust but nothing out of control. I plan to do a 1yr review of the dumbbells so I hope you stay tuned. Thanks again for the question and for watching! Cheers my friend!! 🤙🏻

@@HomeGymAustralia Thanks! I have since upgraded, but using what you have remains an important mindset when funds are tight. Thanks for watching!

Hi there. The free version only gives you access to the 5 minute “Wake Up” routine so it is very limited. The paid version unlocks all programs. Hope this helps and thanks for watching!

Thank you. I’m glad you found it helpful. And thanks for watching!

Thank you! I’m happy with the setup… for now. Ha, ha. We’ll see how it will evolve in the future. Hope you will share which direction you take with your decision. Cheers and thanks for watching!

That’s a great point. Thank you for watching!

The screw literally holds the weight, what do you mean?

@@Ryan-yh9ii No, does it not. thats what i`ve written. Easy to see.

Hi there. I’m sorry to hear of your bad experience with your set. I’m glad you are ok and hope you were able to return it. Thank you for sharing and for watching. Also, many apologies for my late response to your comment.

Thanks for the kind words and hope it sparked more creative method’s of storage. Thanks so much for watching!

@@meyou710 I hope they treat you well. Thanks so much for watching!

I have not had any issue with the set screws coming loose or breaking. But because my home gym is on the 2nd floor of our townhome, I don't drop the dumbbells. So I can't speak to the results after several drops. The screws are removable. Would just need to find replacements. I hope this helps. Thanks for watching and let me know if you have any other questions.

My wish list grew many times over after the visit. Just need to win the lottery and I’ll be set. Ha, ha! 😂 Thanks so much for checking out the video!

The machine you didn’t know exactly what it was, appears to be a “Muscle-D Excel Hip Thrust Glute Machine”.

Thanks for the info. And thanks for watching!

Hi there. Many apologies for the long wait. I have not been able to get the long locking pin so I cannot say with 100% certainty the stats from Eisenlink's website is accurate. But here is what I was able to obtain: The long pin is 6.77 inches or 172mm (not including the knurled handle). Total length of the long pin plus handle is 7.2 inches or 185mm. The standard pin (the one I have) is 3.63 inches or 92mm (not including the knurled handle). Total length of the standard pin plus handle is 105mm. I find this stat hard to believe, but long pin (according to Eisenlink's website) is 2.5lbs or 1.1kgs. Which is the same weight as the standard pin that I have. Hope this helps and apologies again for the delayed response. Thanks so much for watching!

Hi there. Sorry to have kept you waiting. On my set, the handles measure 6.75 inches (from inside the welded plate to other welded plate). Total length WITH the welded plates is 7.375 inches. I hope this helps. Please let me know if you need anything else. Thanks so much for watching!

Thank you. :) and what's lenght of standard thread pin. ? To hold 9 plates in total it's 100mm. Like you said in video. I should not go beyond 80 lb

@@shadmandogar7349 Hi. The actual threaded portion of the locking pin is about 3.625 inches (or about 92mm). The entire locking pin (threaded portion plus knurled "handle") is about 4.125 inches (or about 104.8mm). Please let me know if you have any other questions.

@@123.MikeCheck thank you.

@@shadmandogar7349 Anytime!

Hi there. I went with this product: amzn.to/3S8VXCl I did not intend to equip my gym with a rack, barbell and tons of free weights so I went with 1/4 inch thick rubber flooring. Please note that the above is an affiliate link which I hope you would consider using if you decide to go with similar flooring. Thanks so much for watching and apologies for my delayed response.

@@st3v3nGDHi. Thanks so much for watching!!

Thank you. And thanks so much for watching!

You're welcome. Thanks so much for watching!

Thanks so much for watching. Your channel looks awesome too!

I also considered IronMasters. But due to my location, shipping costs put the price out of my reach. The RepXPeppin looks sweet but Rep does not ship to me so I’m out of luck again. I appreciate you watching!

​@123.MikeCheck the eisenlinks are good too plus the price is really good. By the way, where are you located?

@@roninwarrior216 Hey there. I reside on Maui. 🤙🏻

Thanks! The matching watch band was a happy coincidence. But yes, I’m trying to form a color scheme 😀. I have a total of 100 lbs worth of plates which can fit onto one storage unit. I’m hoping to pick up another expansion weight kit and the long pins. Let me know if there is anything you would like to see in future videos. Thanks for tuning in!

I’ve already made a rough version of your design with some modifications. I think I’ll be moving mine around my home gym a fair amount so I expanded the base width and added outer walls that match the dimensions of the center “rack” that the plates sit on. That should make moving it easier. I still need to add end caps but I was also considering some kind of handles, maybe a cut-out on the end caps.

@@brandonr87 making it mobile is so brilliant! Glad to hear the video helped inspire you. Good luck it is final design. Cheers!

Thank you. And thanks for watching!

Hi. You are correct. The 2.5 lb plates are thinner. The 2.5 lb plate is 1/4 in. thick or about 6.35 mm. The 5 lb plate is 3/8 in. thick or about 9.5 mm. I hope this helps. Let me know if you have further questions. Thanks so much for watching!

@@123.MikeCheck Thank you. What is 100 lb total length/size

@@eshakhan5752 Hi. I don’t have the long locking pins so the absolute max I can put on the dumbbell is 95 lbs. The total length at this weight is about 14.75 in. This is from locking pin to locking pin. Thanks again and let me know if you need anything else.

@@123.MikeCheck that's great design. Very compact. Is the inside thread throughout the handle.

@@eshakhan5752 Hi. A great question. The threads are not through the whole handle. The threaded portion is about 3/4 in. into the handle. Let me know if you need anything else checked out. Thanks!

They look a lot like floppies, especially the older 5.25” ones with the hole all the way through 🤣 I bet you could add some spacers to this design

@@brandonr87 Hmmm, something else for me to consider as a future upgrade 😀. Thanks for watching!

Thanks. And thanks for watching!

Thank you for your feedback. You taught me something new about how how anodized finishes could react with sweat. Thanks so much for tuning in!

Sweet! I’m happy the video helped in your decision making process. Thanks so much for watching!

@123.MikeCheck received mine today. Had to come to work, so tomorrow I will use them.

Hope the dumbbells are working out for you after some use.

Hi. I’m glad the video helped in your decision making. Thanks so much for watching!

Thank you. I’m glad the video helped in your decision making process. Good luck in your fitness journey!

Hi. That is a good question. I could be wrong but I think Eisenlink hit the market first but they may not be the manufacturer. They are made overseas, and likely sold to various companies. Kinda like how the same hex dumbbells are sold by various brands. I could be wrong though. Sorry if this does not provide concrete information. Thanks for watching!

Cool! I’ll keep an eye out for your review.

Thanks. I’m glad you found it helpful and appreciate you for watching!

@@123.MikeCheck Quick question: given the way the weights slot onto the sleeves, do you think if you turned them upside down when fully loaded they might potentially slip out? I'm worried about them being above my face when benching and not being secure. Thanks again.

@@charleslawrence7327 Hi there. Many apologies for the delayed response. Assuming the weight of the dumbbell does not exceed it’s listed capacity, I think that as long as the set screws are seated into the plate in front of it and the locking pins are tightly secured, I would feel comfortable with pressing movements, even if held upside down. I hope this helps. Pls let me know if you have any other questions. Thanks!

@@123.MikeCheck ordered mine earlier today. Cheers mate!

@@charleslawrence7327 Nice. Here’s to your gains!

Hi. Yes, magnets would work. That’s an awesome idea that I never considered. Thanks for the sharing and thanks for watching!

@@123.MikeCheck I found the weight of each magnet by asking the internet query, "What is the weight of the HFT 250 lb and the 150 pull retrieving magnets" on an AI website. If you are considering using other magnets from other manufacturers, I suggest you research the weight of each magnet by using an AI research website.

Awesome! Great minds think alike. My Keppi bench is still serving me well, but Keppi’s version of the zero-gap bench is tempting. Cheers to value over vanity. Thanks for watching!

@@123.MikeCheck I really like my Eisenlinks, thank you for your reviews on them. I live in a firmly land-locked state and don't have to worry about the shipping issues you have (sorry) but do appreciate the value mindset and would love to see more product reviews. Subbed!

@@brandonr87 I am glad you are enjoying the Eisenlink’s. Thank you so much for the support!

Thanks for the kind words. I hope you keep us updated with the equipment you add to your setup. Thanks for watching! 🤙🏻

I will def update. Again, thank you.

Hi there. I'm sure each set is different so I wanted to test the weight accuracy of my 50lb (22.7kg) set and am satisfied with how close it is. The other experiment was just to see how much I could physically load using the locking pin that came with my set. Turns out you can fit a maximum of 95lbs (43.1kg) which is more than its listed weight. But caution should be used when using more than the listed weight capacity. I hope this answers your question. Please reach out if you have any others. Many thanks for tuning in!

Hi there. The long locking pin is on the market but looks like it's out of stock on Amazon and Eisenlink's direct site (as of Apr 24, 2024). I've seen it become available but these pins are growing in demand so they sell out fairly quick. When they do become available, I hope you would kindly consider using the affiliate link in the description. Thanks for watching and let me know if you have further questions.

Thank you so much for the input

Thanks for the tip. That code would come in very handy. I am REALLY tempted by this as I could do a lot with it. My only hesitation is the height. I think it might be a touch too tall for my space.

@@123.MikeCheck believe it or not there’s a really big demand but I know that in the works they have one that has either a detachable pull up bar or an option without a pull up bar. I would just wait to get that one if I were you it’ll probably have other enhancements as well. I think the height is 88 inches or somewhere close to that so it’s too much for a lot of people. at the end of the day I’m looking for a product like yourself that doesn’t take up that much space that’s going to be high-quality and that I am actually gonna wanna use and that can bring me results and I feel like this product is the one. Gonna make a video just like yourself and explain why I’m gonna get it too

@@123.MikeCheck you’ll probably be able to get the smaller version or the detachable version in the next year based on the time it will take to make it and then have enough to sell because of the demand is so high right now

@@Fitforacting a version with a removable pull up tower would be perfect. Again, thanks for your info and insight. Much appreciated!

​@123.MikeCheck They make a version without the pull up bar now! It would be $650 for you with the $50 off and I think you can add a pull up bar to it later

I normally don’t make a vid for any new item. But this one has me very interested… my space is limited so I have to be very selective. I had my eye on a SkiERG, but now, I don’t know... Thanks for watching! BTW, I hope to hear from you and let me know how your training is going with this new equipment. Cheers!!

Excellent. Good luck in your fitness journey! Thanks again for watching.

those may slide out, this is why they added looking screws on the holder to the plates, so it wont slide out be careful

These are durable enough to be dropped from a reasonable height during normal use. Having padded floor covering helps too. I personally do not have any concern if they are dropped. Hope this helps. Thanks for watching!

@@123.MikeCheck Thank you! How about the knurling as well, more passive or aggressive?

@@john.paraiso Hi. The knurling is definitely more on the passive side. But to me, it’s still better than having the rubberized style of handles. Let me know if you need anything else. Thanks!

@@123.MikeCheck Thank you! I have the Bowflex 552s right now and I'm looking for an upgrade so they may be a contender

@@john.paraiso Good luck. I’m curious to learn which direction you take. I hope you provide an update when you make a decision Have you seen the new Rep x Pepin dumbbells? They look SWEET, but not for me. Rep does not ship to me. Cheers!

I think those types of exercises should be ok. But I would recommended staying under 80lbs (unless you have the longer locking pins). Hope this helps. Thanks for watching!!

Hi. Not sure if you saw my follow up video of the 30lb expansion kit. I did a quick unboxing which showed a foam insert that it shipped in. For now, I’m using those foam pieces to store unused plates on the bottom shelf of my dumbbell rack. Hope this helps. Let me know if you have further questions. Thx for checking out the videos!

Thanks for the insight and thanks for watching! 🤙🏻

I take that back there is less than 1cm screw on with 75lbs !

Thanks for watching. Cheers!