Відео

Hi, If you are still experiencing issues with setting up your Multy system, please contact our support team. Our colleagues will be happy to assist you.

@DjallalArchi That depends on what requirements you have for the router. I recommend our product selector website. : selector.zyxel.com/ There you can find the right indoor router for you

@@ZyxelSupportCampus I don't see the new 5g routers with wifi 7 (like the NR5307) in the comparator

Hi @PirateSimulator please check the steps in this video and if the device does not do as it should you can contact the local support for help.

Dear @bluegate4630 please make sure you have the correct Annex and the DSL line is active. If you use a splitter for phone connection, please remove it. Check with your provider which xDSL line you have and the router must be compatible with it. We are happy to help you on support.zyxel.eu

Hi @giannicusimano the satellites are not visible to the network as they match as one mesh system to the network.

Hi @zenspa please check if the device is good for your internet connection and the cables are correct wired and installed. Please also check with your internet provider, if the DSL line is up and in service.

Dear @ps5ps530 please check the speed of the connection WAN, the LAN and WLAN to see where the latency issue comes from. It may occur that your internet line is too slow for the game or the line is busy with other applications. You can also check to switch the device to bridge mode and only connect your gamer PC to see if the routing function of the device creates the latency. If this is the case you might need to use the device as end-point to xDSL only and add a faster router such as the Armor 5G to service your applications.

@robert7622 The installation of the FWA710 5G Outdoor Router, as shown in the video, is very straightforward and can be quickly completed with the help of the Zyxel Nebula and Air App. By "OB work," do you mean Outdoor Broadcasting? If so, then it can be easily accomplished without any issues.

@@ZyxelSupportCampus so in under an hour?

@@robert7622 yes

@giannicusimano If you have followed the steps shown in the video, the device should connect and take on the configurations once you've lifted it up. As long as you're within the usual range, it should function flawlessly. If you continue to encounter issues, please reach out to our support team.

Hello @steve998, please follow the steps demonstrated in the video to ensure proper connection. If you encounter any issues, please reset the devices and start again. The smart mesh can support up to 256 nodes/devices and is available at all times.

I followed the step 1 with LAN link: but at the end I need to switch off the WX3100 to move it upstairs. After that I switch off, it will maintain the same properties? Cause it's seems not working good. Thanks

WLAN genişleticiyi doğrudan kullanıcı arayüzü üzerinden de ayarlayabilirsiniz. Ürünle nasıl bağlantı kurulacağını ve yapılandırılacağını öğrenmek için lütfen kullanım kılavuzunu okuyun.

@tomassalzmann2865 You have the option to watch the video with English subtitles. You can set this by clicking on the settings icon on the video and then selecting the desired subtitle.

🤗

@gkym the LAN is used for backbone, if it is connected between the nodes. If you connect a PC by cable the LAN should normally work fine, but the application can use ports that are not forwarded into the mesh system by your router. Please check: can you play when you are connected direct to the IAD (Router)? Can you play when you are in the WiFi? Please report your findings to the support team under support.zyxel.eu

Hi, You mean there is no gray port on the device or ther was not a gray cable included? The cable is available in every shop that sells telephone accessory. If the device does not have a gray port it is not the VMG3625-Series, but an EX... something. Please check.

Yes you can choose from Bridge / Router mode.

Hi, the repeater can only be a real repeater that connects as client to the WiFi of the Router. It does not mesh. Please contact our support.zyxel.eu for assistance.

Hi, you must connect the first node with a cable and extend the WiFi then with the Multy M1 set. If the WiFi of the router overlap with the WiFi of Multy, you will need to switch off the routers WiFi. If your new router is a Zyxel E/DX model with AX1800, you can use the WX3100 to mesh the WiFi of the router and extend it.

Hi Hilda, it is maybe only an issue of the phone cable. Can you hear a tone when you pick up the phone? If yes then the wiring is okay. You need to check the SIP settings with the provider. If the phone stays silent you need another cable, where the wiring is correct. In some countries you need a phone adaptor that connects the plug of your phone to the device. Ex. Germany needs a TAE-F to RJ11 adaptor. Please check with your providers support, if the problem still stays.

@@ZyxelSupportCampus we have 2 phones one in our business and one upstairs in the house. The one upstairs rings but you cannot hear anyone on the other end just noise where as the one in our business does not ring at all and there's no sound on that one .

@@hildalough-sm6cy this sounds like incompability of the phones or wrong wireing. Check with a phone that is offered by your provider or with the phone booth neext door, if they can help. It is not an issue of the device as you hear ring and sound.

5G NR interface 3GPP Release 15 standard-compliant Supports both NSA and SA modes Supports frequencies: n1/n3/n5/n7/n8/n20/n28/n41/n77/n78/n38/n40 DL 4×4 MIMO: n1/n3/n7/n38/n40/n41/n77/n78 Data rates: 5G SA: DL 4.2 Gbps; UL 900 Mbps* 5G NSA: DL 5 Gbps; UL 650 Mbps* Supports DL modulation QPSK, 16-QAM, 64-QAM and 256-QAM Supports UL modulation QPSK, 16-QAM, 64-QAM and 256-QAM Output power: Class 2 (26 dBm) for 5G NR n41/n77/n78 Class 3 (23 dBm) for 5G NR n1/n3/n5/n7/n8/n20/n28/n38/n40

​@@ZyxelSupportCampusis it qualcomm x55?

@@DjallalArchi yes that is the modem used in this device

Welcome!

Hi @culmalachie sorry to read that. Maybe you can use some of the new holes to fit a cable organizer with them.

Hi, I am sorry but the device does not support ee SIM cards.

@@ZyxelSupportCampus i using with ee simcard 🤷‍♂️🤷‍♂️its working. Just i dont see the cells

@@noxvilll19890331 this is what I mentionned. There is no full support of ee SIM cards.

Very sad to read this, but the WLAN speed is not 1:1 same as your internet speed. It has many facors that influence the speed. Which frequence you use, which channels are used and how many client and apps are running. Further the small distance between main WiFi and the repeater is not good, because your client does see two strong WLAN APs and flips between them. Please set up your network as it should be with distance of 15-25 meters between IAD and repeater and then you see a much better performance. We are happy to help you, if you still see issues. support.zyxel.eu

hi, you can direct access the device GUI when you are connected with the device WiFi.

Hi, no this device must have a cable in the first AP and then the second can do only with power cable, but there are WX3100 devices that can do the function with SmartMesh.

@@ZyxelSupportCampus thanks for the feedback. I had to return this WX3100 cos it was terrible with roaming and handoffs in between the devices. Still on NWA90AX. So I can’t have it working in bridge mode, with one connecting wirelessly to the EX5601-T1 and to a second NWA90AX?

@@datamindz no this AP works only in bridge mode with same devices.

@@ZyxelSupportCampus okay. I’ve had to return it

Hi, the bridge mode cannot be broken but due to the IAD you use it may not be possible. If the IAD does not offer routing functions, the bridge mode fail as no client gets an IP address. Please have a look also to the manual of the device, this helps a lot to answer questions.

The NWA90AX has more antennas in 5Ghz segment and can provide a guest WiFi.

Hi Brian, yes to reduce the amount of electronic waste, Zyxel decided to suggest the professional PoE power by switch or injector. You can use the GS1915-series or the PoE12HP to power it up.

@@ZyxelSupportCampusYes, the reasons for not including the adapter with the product make sense. However, showing an unpacking video with parts not identified or in the box made less sense to me. Your comments on PoE sources is helpful. It would also be helpful to include the power adapter specs for those that want to setup as shown in the video.

Dears, please check how the desktop is connected and update the drivers for the hardware. If it is connected by WiFI you need to check the WiFi speed 802.11a/b/g/n/ac/ax?

Yes you can use multiple devices in a daisy chain to mesh the network. The wireless performance will get reduced how longer the chain goes and the more clients are connected to the WiFi, but for private use this is a effortless option to extend your network flawless.

Hi, not sure what you mean, Playstation can connect with this wireless and if you have an Ethernet Port with Network access on the PS, you can connect this AP to send out a WLAN, but it will not repeat any WiFi as long as you only have one device WX3100 in operation. 😃

Thank you, like and share the video and also subscribe to our channel, that is our applause :)

Hi the Power on secondary is 12V / 3A, plus pole inside plug

@@ZyxelSupportCampus That is brilliant thanks.

Dear @mibox4934 please check this process with your provider, because it seems that the device is not recognized as offline at the provider network. This causes the long wait time, as the IP renewal is not initiated correctly. I suggest you to wait for 20 seconds before you switch on the device again. When the internet connection is not established within 120 seconds, the problem is with your provider and not with the product.

@anonimadam2522 we are sorry about your experiences. You need to compare the correct value with the real speed that is possible to achive in such WiFi connection. The WLAN client must have the correct AX1800 chipset to connect with full speed and all other clients in same WLAN must comply to the new AX1800. If any older is connected same time, the speed is going down to make a compatible connection. Please check the other videos that explain the real WiFi Speed benchmarks.

Hi, yes this is the option 2 described in this video.😃

Router on/off yes, Wifi is not a good idea to switch it off, as this is the best feature of the product. But you can find options in the Zyxel Armor App.

Hi @vkerik7165 please ask your questions in English, as this is easier for all. You asked the name of the app that is used in part II. The name is Zyxel ProMesh App.

Dear Sobahle, no not compatible with "SmartMesh" but you can still use the solution 2 with LAN cable between the EMG and the first WX3100.

@@ZyxelSupportCampus Thank you!

Hi Tomas, please check the distributors and resellers shops this week. The product is in roll out status.

Dear Ben, yes you can extend the network on up to 128 nodes, if you want, but as the Mesh and the Data goes on the WiFi signal, the speed may be not satisfying. If you want to increase more than 4 nodes, you should consider to have LAN cables installed in the building.

So if I use the 2nd method, in my situation a node goes behind the router and I want to place 3 in the room. This should be possible via the wifi signal, I assume?

@@michielafa the topology is like this: ---Router--Ethernet-----1stWX3100 ))) WLAN ((( 2ndWX3100 ))) WLAN ((( 3rdWX3100 )))