- 75
- 789 990
X auto fix
Spain
Приєднався 11 лип 2015
Straight to the point videos as much as we can , we respect viewers time, trying our best not to waste it , If you're a car enthusiast or someone who wants to improve their knowledge of automotive repairs and maintenance, you're in the right place! Our channel offers a wide range of DIY repair and maintenance tutorials. From simple oil and filter
changes to complicated engine repairs, our
step-by-step guides will make you feel confident
in tackling issues . We also provide valuable
tips on car maintenance, join us, and become a part of our community of car enthusiasts who share tips, tricks, and experiences of working on cars.
*Disclaimer
We .auto fix DIY is not responsible for any property damage, injury, or loss incurred as a result of any information or from improper use of any tools or equipment contained in this channel .information given in this channel does not guarantee the desired outcome .use this information at your own risk
changes to complicated engine repairs, our
step-by-step guides will make you feel confident
in tackling issues . We also provide valuable
tips on car maintenance, join us, and become a part of our community of car enthusiasts who share tips, tricks, and experiences of working on cars.
*Disclaimer
We .auto fix DIY is not responsible for any property damage, injury, or loss incurred as a result of any information or from improper use of any tools or equipment contained in this channel .information given in this channel does not guarantee the desired outcome .use this information at your own risk
how to remove cigarette lighter socket | Hyundai
#cigarettelighter #hyundaielantra #automotive
To remove the cigarette lighter socket from a Hyundai Elantra, follow these steps:
1. Use a flathead screwdriver to gently pry off the trim panel surrounding the cigarette lighter socket. Be careful not to scratch or damage the surrounding surfaces.
2. Once the trim panel is removed, you will see the cigarette lighter socket itself. It will be attached to the vehicle with a wiring harness.
3. Disconnect the wiring harness by wiggling , pressing the tab or release button, and pulling the harness away from the socket.
4. Use a socket remover tool so you can pull the cigarette lighter socket out of the dashboard or center console
5. Inspect the socket for any damage or wear and replace it if necessary.
6. To install a new cigarette lighter socket, simply reverse the steps above, making sure to securely attach the wiring harness .
7. Test the new cigarette lighter socket to ensure it is working properly before reattaching the trim panel.
By following these steps, you should be able to easily remove and replace the cigarette lighter socket in your Hyundai Elantra.
*Disclaimer
We X Auto Fix are not responsible for any property damage, injury, or loss incurred as a result of any information or from improper use of any tools or equipment contained in this channel .information given in this channel does not guarantee the desired outcome .use this information at your own risk
To remove the cigarette lighter socket from a Hyundai Elantra, follow these steps:
1. Use a flathead screwdriver to gently pry off the trim panel surrounding the cigarette lighter socket. Be careful not to scratch or damage the surrounding surfaces.
2. Once the trim panel is removed, you will see the cigarette lighter socket itself. It will be attached to the vehicle with a wiring harness.
3. Disconnect the wiring harness by wiggling , pressing the tab or release button, and pulling the harness away from the socket.
4. Use a socket remover tool so you can pull the cigarette lighter socket out of the dashboard or center console
5. Inspect the socket for any damage or wear and replace it if necessary.
6. To install a new cigarette lighter socket, simply reverse the steps above, making sure to securely attach the wiring harness .
7. Test the new cigarette lighter socket to ensure it is working properly before reattaching the trim panel.
By following these steps, you should be able to easily remove and replace the cigarette lighter socket in your Hyundai Elantra.
*Disclaimer
We X Auto Fix are not responsible for any property damage, injury, or loss incurred as a result of any information or from improper use of any tools or equipment contained in this channel .information given in this channel does not guarantee the desired outcome .use this information at your own risk
Переглядів: 1 894
Відео
Hyundai elantra 2011-2016 gas door won't open
Переглядів 2,7 тис.8 місяців тому
#hyundai #hyundaielantra a temporary solution for a hyundai elantra 2011-2016 to open the fuel cap
fuse keeps blowing
Переглядів 878 місяців тому
#fuse #fusebox #electricalsystem If a vehicle fuse keeps blowing, it could indicate a short circuit or an overloaded circuit. Here are some steps to troubleshoot and fix the issue: 1. Check the owner's manual or the fuse box cover to identify which fuse is blowing and what system it controls. This will help you narrow down the possible causes. 2. Inspect the wiring and connections related to th...
how to put chains on tires
Переглядів 568 місяців тому
#snowchains #snowchain #snowdriving Putting on snow chains can be a challenging task, but with the right tools and knowledge, you can do it yourself. Here is a step-by-step guide on how to put on snow chains on your tires: 1. Park your vehicle on a flat surface and engage the parking brake. 2. Lay out the snow chains on the ground and untangle them if necessary. 3. Place the snow chains over th...
Better Traction on Snow | Sipe Your Tires Without any Special Tool
Переглядів 1,3 тис.9 місяців тому
#tires #tireservice #tire Siping your tires with a knife cutter can help improve traction and performance in snowy and winter conditions. Here's how to do it: 1. Start by ensuring that your tires are clean and dry. This will make the siping process easier and more effective. 2. Use a sharp knife cutter or siping tool to make small cuts (sipes) on the tire tread blocks. The cuts should be made a...
Vehicle Battery Drains Overnight
Переглядів 7759 місяців тому
#batterydraintest #batterydrain #battery when the vehicle battery drains overnight : 1. Use a multimeter to measure the voltage across the battery terminals with the vehicle turned off. A fully charged battery should read around 12.6 volts. 2. Turn off all electrical components in the vehicle (lights, radio, etc.) and disconnect the negative battery cable. 3. Connect the multimeter in series be...
coolant flush without removing thermostat
Переглядів 24810 місяців тому
#coolingsystem #coolant #vehiclemaintenance Flushing the engine cooling system is an important maintenance task that helps to remove old coolant, rust, and other debris that can build up over time. This is a Jeep , but here's a general guide on how to flush the engine cooling system: 1. Allow the engine to cool completely before starting the process. 2. Locate the radiator drain plug, which is ...
Reduce Fuel Consumption & more Power | check Spark Plug Wires
Переглядів 15211 місяців тому
#sparkplug #sparkplugs #ignitionsystem symptoms of bad spark plug wires : 1. Engine misfires: One of the most common symptoms of bad spark plug wires is engine misfiring, which can cause the engine to run rough, hesitate, or stall. 2. Poor fuel economy: Bad spark plug wires can lead to incomplete combustion, which can result in poor fuel economy. 3. Engine hesitation: If the spark plug wires ar...
Benefits of engine oil filter magnet
Переглядів 16911 місяців тому
#engineoilchange #oilfilter #oilchange to allow oil to circulate without filtration. In these situations, magnets on the oil filter can offer the following benefits: 1. Capturing metallic particles: Magnets can attract and capture metallic debris present in the oil. This helps prevent these particles from circulating in the engine, reducing the risk of wear and damage to engine components. 2. I...
Don't change your water pump
Переглядів 98Рік тому
#waterpump #coolantleak #coolingsystem A weep hole is a small opening or drain hole found on some water pumps, typically located on the underside of the pump housing. Its purpose is to allow any excess water or coolant to escape from the pump in case of a leak or seal failure.The weep hole is designed to drip water or coolant when there is an issue with the pump, serving as an early warning sig...
Jeep Front Brake Pad Replacement
Переглядів 701Рік тому
#brakepad #braking #brakes In this UA-cam video, we will change the front brake pads Changing the friction codes of brake pads on only one axle can potentially affect the brake bias of the vehicle. Brake bias refers to the distribution of braking force between the front and rear wheels. If you change the friction codes on only one axle, it can disrupt the balance of braking force and compromise...
Jeep Grand cherokee 2005-2010 CV axle-differential seal replacement | Driver side
Переглядів 3,1 тис.Рік тому
#axle #cvjoint #oilleakrepair CV seal leaking oil . This cv seal is for Jeep WK 2005-2010 jeep 2005, jeep 2006 ,jeep 2007, jeep 2008, jeep 2009, jeep 2010 To replace the CV joint axle-differential seal on the driver side of a Jeep WK, you will need the following tools and materials: - Jack and jack stands - Socket set - Torque wrench - Pry bar - Hammer - New CV joint axle-differential seal - Ne...
save your money & change spark plugs Yourself
Переглядів 376Рік тому
save your money & change spark plugs Yourself
the hidden dangers of not changing your spark plugs on time
Переглядів 1,2 тис.Рік тому
the hidden dangers of not changing your spark plugs on time
testing the (zirconia) o2 sensor with multimeter
Переглядів 943Рік тому
testing the (zirconia) o2 sensor with multimeter
how to test alternator with multimeter
Переглядів 15 тис.Рік тому
how to test alternator with multimeter
Wow thanks for nothing
what happens when one of them pulleys come off in a parking lot , just chillin in a parking lot rn wondering
Thanks so much!! NEVER thought of trying this!! Thanks!
Mine does not move that far. Belt is still hella tight
I watched 5 times. I saw a fuse blow when power port was plugged in to. Inhathered the shot of 'Heavy Duty Compressor' and the red sticker, (I couldnt read it faz enuff), had sometimg to do with the fuse blowing when the power point was utilized. Other than that ; 🤔°°°🤷🏻♂️? But thank xoi for TRYing go enl8ghten me.😃👍🏻
Was literally stranded. UA-cam refused to play even with 4G had to walk all the way home then the video started to play. I swear the universe hates me today
Thank you You are a blessing I watched an earlier video which claimed you could replace a Volvo alternator in 30 minutes with out spending any time on the tensioner or reference to the socket size needed to remove the belt to access the alternator I'm a chick 😢😮😢 and I'm so pissed my boyfriend is standing over me saying I told you so😢😮😢 thank you soo much tomorrow I am going to get up and try it again
Very helpful! I just changed my bulb. Pretty easy. Thank you
Thank you , it helped a lot 😅
I wonder how a s550 gt 10 speed performance pack with magnaride compares to the mach 1 😅🤔
What size is the socket
I did not know that was there
Mine won't close. The thing that holds the gas door got stuck inside. Any idea how to fix it please
Too fast
Ass
Nothing at all
WoW thanks so much!
Ahora no abre aun con la palanca de abrir
I love you thanks bro
DUDE!!!!! I pull up to the gas station with absolutely no gas in my car needing to fill it up and I pulled my lever and for whatever reason today is the day where it decides to break obviously, I couldn’t drive it to a mechanic shop because like I said, I have absolutely no gas and this video just saved me so much time and money. I cannot thank you enough for what you did today. Thank you shout out all the way From Los Angeles!!!!!!!! 🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾🙌🏾
Mine acted up today at the gas pump too actually so glad for that information
Appreciate the vid Bro!
Just wasting time
What's a better solution?
Thank you so much❤❤.worked for my car
What was the cause of this issue for you? I'm curious if this is a common issue for the Hyundai models
Wtf?
So you removed the coolant reservoir? Do i have to take off the passenger side tire?
Do I need to remove any other part to replace the belt?
If you're handy you usually shouldn't. Stuff will be in the way but you can work around it usually
So what do you suggest for those of us who have a 2019 car with a parasitic draw and can't figure out what it is?
What year? Where’s the sound? What size bolt? Is this guy kiddo g
Mine the bolt just turns
Mine too! Been trying to find out what to do to get it and belt off!!
VERY VERY HELPUL! THANKS
Mine won’t move? I have a dodge nitro 2010 3.7 engine.
Yes It's hard to move , it needs a long breaker bar , If it's the same belt tensioner type
Thank you good video !👍🏼
Glad you liked it!
I have 2 cig lighter.. one works the other not.. what could be?
Some common causes : The 2 cig lighters may have separate fuses , a blown fuse . The wiring for the non-working cigarette lighter may be damaged or disconnected. The cigarette lighter itself may be faulty and need to be replaced. There may be a problem with the vehicle's electrical system that is preventing the cigarette lighter from working properly.
Vid of install too plz
ua-cam.com/video/ufhIUdioWwk/v-deo.html
@@fixing.automotive
These old cars that you can actually work on I
I just replaced an alternator on a 2018 chevy in less than an hour, its not just old cars
@@moBBuster what a Chevy Cruze wow your a master tech 😂😂
Yeah my 2013 Kia Sorento was impossible to get the belt on. Took me 5 hours before I finally gave up and put the old one back on. Had to take it to a mechanic and they struggled with it too. No space to work in these new engines.
oh god, pls don't misinform people. A car sits there for a week won't be drained all the power. If that is the case, something wrong with the circuits or battery, go get it fixed and that has nothing to do with kill switch. Kill switch can protected a car from being stolen
Ur right a vehicle battery shouldn't be drained in a week unless there's a problem . Other than protecting the vehicle from being stolen or unauthorized access, a kill switch also used if the vehicle catches fire ,It will disable the fuel pump , ignition system, and all circuits, which might help , also a kill switch can be used as a battery disconnect switch to protect the battery from drainage when vehicles are not used frequently or are stored for long periods of time
Not for GT
Thanks for sharing
I'm glad you're not my mechanic, you don't know how an automotive electrical system works, but then again I don't need a mechanic 😂
😂
What size bolt?
it's 12 mm
@@fixing.automotive thanks
I only use tire inflator and sealer , in the dark or in snow and rain
Yes, that's better
This works for many vehicles other than Hyundai
You're right
Thank god my 97 f150 I don’t have non of that just light. 😂 and I don’t need lights. The highways always lit.(lightning McQueen.)😂😂
😄😅 Yes, older vehicles in general are simpler and more reliable
All automatic transmissions have transmission range inhibitor sensor and also some manual transmissions
Mine started working intermittently on only about 30000 miles
Yes same problem for my Hyundai , when it don't start on P it will start on N
This weep hole is new for me
My vehicle doesn’t show a single thing about he lighter part. So dumb
That's right , when a fuse blows this means that there's a problem in the electrical system, replacing the fuse won't fix it
Have a lot of space for the water pump